Get ConguredGet Connected
Cisco Business PoE Router
Cisco Business PoE Switch
Cisco Business 240AC Access Point
Cisco Business 240AC Access Point | Quick Start Guide
GbE
1
2
Cisco Business Wireless access points can be mounted in several congurations—on a suspended ceiling,
on a hard ceiling or wall or in the plenum air space above a suspended ceiling.
For detailed mounting instructions, see ”Cisco Business Wireless Access Point Administration Guide”
Step 3—Mount and Ground
©2019 Cisco and/or its aliates. All rights reserved. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its aliates in the U.S. and other countries.
To view a list of Cisco trademarks, go to this URL: https:// www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
For Cisco support and additional product documentation, including
the Administration Guide, visit:
cisco.com/go/cbw240ac
Support
For more advanced congurations, see “Cisco Business Wireless Access Points Administration Guide”
Preparing Your Product
1
2
Connect your access point via ethernet cable (provided) to a PoE LAN port on your router or switch.
Adding to an existing wireless network? See the “Add to an existing wireless network” section below.
If setting up a new nework the device will begin initial boot up. The LED will cycle through green,
amber, and red. This is normal and can take up to 6 minutes. The device is not ready until the LED is
consistently blinking green or solid green. Once this occurs you can proceed to “Get Congured”.
Add to an existing wireless network
Allow the access point to boot up and automatically update its rmware and conguration to match
the existing network. This can take ten minutes or more and the LED will cycle through green, amber
and red. This is normal. Once the LED is blinking green or solid green the setup is complete and the
AP has joined the network.
Launch a web browser, such as Internet
Explorer, Firefox, Chrome or Safari.
Create a username and password.
In the “Address” bar, type
http://ciscobusiness.cisco and press “Enter”.
Click “Start” on the Cisco Business Wireless
Access Point page to launch the Setup
Wizard.
After you complete the initial conguration settings,
the conguration is saved and the access point will
reboot. This may take up to 6 minutes. The booting
process is complete when the LED is consistently
blinking or solid green. This LED pattern will appear
earlier in the boot sequence, but the device isn’t
ready for access yet.
1
4
2
3
6
Step 2—Access via Wireless (Web UI)
Step 1—Connect
Follow the Setup Wizard instructions to
nish the initial conguration settings.
5
NOTE: If you want to congure a static IP address
for the management interface, enable the option:
“Would you like Static IP for your Primary AP
(Management Network)”. If not, the interface gets
an IP address from your DHCP server (typically in
your router).
If you will be adding mesh extenders, enable the
“Mesh” option. By default this option is disabled.
Connect to the new SSID that you created during the
setup process.
7
Open a web browser. In the “Address” bar type
https://ciscobusiness.cisco and press “Enter”. The
Cisco Business Wireless Access Point login page is
displayed.
8
Log in using the user name and password created
in step 4 and proceed with conguration. Once
conguration is successful you can now proceed
to monitor and manage the access point and
associated devices using the web interface (UI).
Save the conguration by selecting the red disk
icon in the web interface (UI) header and select “OK”
on the conrmation pop-up window.
9
Download the Cisco Business app to simplify
setup and monitoring. Just follow the “Set up
my network” steps in the app after download.
VIA APP*
Search for the wireless SSID “CiscoBusiness-Setup”
Connect to this SSID with the passphrase “cisco123”
VIA WIRELESS (WEB UI)
1
2
*When available