Pair Your Phone
Make sure Bluetooth® is enabled on your mobile device.
With the vehicle in the MAR (ACC/ON/RUN) position, press the Phone
button in the vehicle’s touchscreen menu bar.
2
Press “Yes” to begin the pairing process.
3
Search for available devices on your Bluetooth®-enabled mobile phone.
Uconnect Phone will display an in-progress screen while the system is connecting.
5
Some mobile phones will require you to enter a PIN as part of the connection process.
For additional information, refer to “Phone Operation” in your Owner’s Manual Supplement.
KEEP IN MIND:
If “No” is selected, you can still pair a
mobile phone by pressing the “Pairing”
button from the Uconnect Phone main
screen.
TIP:
If no phones are currently connected
with the system, a pop-up will appear
asking if you would like to pair a
phone. However, if the system has
been previously paired with another
device, this pop-up will not appear.
SEEING A POP-UP?
?
READY TO REMOVE A PHONE OR AUDIO DEVICE?
When your mobile phone nds the Uconnect system, select “Uconnect.”
When prompted on the mobile phone, accept the connection request from Uconnect Phone.
When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your
favorite phone. Selecting “Yes” will make this phone the highest priority. This phone will take precedence over other paired
phones within range, and will connect to the Uconnect system automatically when entering the vehicle.
Only one mobile phone and/or one Bluetooth® audio device can be connected to the Uconnect system at a time.
If “No” is selected, simply select “Uconnect” from the mobile phone/audio device Bluetooth® screen, and the Uconnect
system will reconnect to the Bluetooth® device.
6
CONNECT YOUR PHONE
Press the “Pairing” button on the touchscreen.
Press “Paired Phones and Audio Devices”.
Press “Settings” next to the phone or device you want to remove.
Press “Delete Device”.
Press “X” to exit the settings screen. The device should be removed.
2
3
4
1
5