RAM 2021 ProMaster City Quick start guide

RAM
Brand
RAM
Model
2021 ProMaster City
Category
Cars
Type
Quick start guide

This manual is also suitable for

RAM ProMaster City
QUICK
START
GUIDE
Parking Brake
VEHICLE OVERVIEW
Radio On/OLight Controls Windshield Wiper/
Washer Lever
Mirror
Adjustment
Cruise Control
Buttons
Phone Control
Buttons USB Port
Instrument
Cluster Display
Control Buttons
Tune/Browse
Mopar® YOUR Way
REAP THE BENEFITS OF YOUR OWNER'S PROFILE
Get an online experience all your own—tailored to you and your vehicle, accessible
anytime, anywhere.
24/7 ACCESS TO EVERYTHING YOU NEED
Custom dashboard for every vehicle in your garage
Access to your vehicle's owner's manual, warranty & more
Ability to set preferred dealer & schedule service with ease
Special oers on exceptional Mopar® service at your dealership
Remote vehicle commands right from your mobile device**
** Requires an active Uconnect subscription
Maintenance records and up-to-date vehicle health reports**
UTILIZE YOUR SERVICES & OWNER PROFILE
*Canadian residents aren't required to create a prole, as one is created when a SiriusXM GuardianTM account is activated.
Tire Service Kit
If a tire is punctured, you can make a rst emergency repair using the Tire Service Kit located
under the passenger front seat.
DO NOT remove the foreign object (i.e., screw or nail) from the punctured tire.
X
BE AWARE:
• The kit can be used in all weather conditions.
• Tire punctures of up to 1/4 inch (6 mm) can be repaired.
SERVICE YOUR TIRE
Air Pump Hose
(Black)
Sealant Hose
(Clear)
Power Button Pressure Gauge Sealant Bottle
Exterior Light Controls
Headlights, Parking Lights, Taillights,
License Plate Light, Clearance Lights &
Instrument Panel Lights
PUSH DOWN & RELEASE
TO USE FLASH-TO-PASS
PUSH DOWN ALL THE WAY
TO ACTIVATE HIGH BEAMS
OPERATE YOUR LIGHTS & WIPERS
Wiper Operation
The windshield wipers/washers only operate with the ignition in the MAR (ACC/ON/RUN) position.
KEEP IN MIND:
PULL
TO ACTIVATE THE
FRONT WINDSHIELD WASHER
PUSH UP
TO MIST THE WINDSHIELD
PUSH
TO ACTIVATE THE
REAR WINDSHIELD WASHER
Rear Wipers OFF
Front Wipers
HIGH
OFF
INT
LOW
Rear Wipers ON
Instrument Cluster Display
The following menu items can be found in the Instrument Cluster Display:
• Dimmer
• Speed Beep
• Trip A/B (options are selectable through the steering wheel stalk)
• Buzzer Volume
USE YOUR INSTRUMENT CLUSTER
The system allows the driver to select information by
pushing the following buttons mounted on the instrument
panel to the right of the steering column:
SPEED BEEP
This function is used to set a speed limit (mph or km/h); the driver is alerted when this limit is exceeded.
DIMMER
With the headlights on, and without entering in the menu, push the up or down arrow button to increase or
decrease the brightness of the instrument panel, graphics and command buttons.
TRIP B DATA
This function can be used to activate (On) or deactivate (O) the Trip B display (Partial Trip).
BUZZER VOLUME
With this function, the volume of the acoustic signal which accompanies the display of failure/warning can be
adjusted according to seven levels.
SEAT BELT BUZZER
Only shows in the instrument cluster display if the seat belt reminder was previously deactivated by an
authorized dealer.
Climate Controls
The A/C button engages the
Air Conditioning (A/C) system.
The Recirculation button
toggles between recirculation
and outside air modes.
The Blower Control knob
will regulate the amount of air
forced through the system in
any mode you select.
The Temperature Control knob
will regulate the temperature
of the air inside the passenger
compartment.
Use Defrost mode
with maximum
temperature settings
for best windshield and
side window defrosting
and defogging.
TIP:
The Mode Control knob
allows you to change
between the dierent
airow distribution modes.
The Rear Defrost button will turn on
the rear window defroster and heated
outside mirrors (if equipped).
Heated Seats
ONCE THE HEAT SETTING IS SELECTED,
HEAT WILL BE FELT WITHIN
2-5 minutes
The controls for the front heated
seats are located on the lower
outboard side of the seat.
The feature is only available with the ignition
in the MAR (ACC/ON/RUN) position.
KEEP IN MIND:
ON Push the switch once, and the
LED will illuminate to indicate that
the heated seat is turned on.
OFF Push the switch a second time to
turn o the heated seats.
HEAT YOUR VEHICLE AND YOUR SEAT
Pair Your Phone
Make sure Bluetooth® is enabled on your mobile device.
1
With the vehicle in the MAR (ACC/ON/RUN) position, press the Phone
button in the vehicle’s touchscreen menu bar.
2
Press “Yes” to begin the pairing process.
3
Search for available devices on your Bluetooth®-enabled mobile phone.
4
Uconnect Phone will display an in-progress screen while the system is connecting.
5
Some mobile phones will require you to enter a PIN as part of the connection process.
For additional information, refer to “Phone Operation” in your Owner’s Manual Supplement.
KEEP IN MIND:
If “No” is selected, you can still pair a mobile
phone by pressing the “Pairing” button from
the Uconnect Phone main screen.
TIP:
If no phones are currently connected
with the system, a pop-up will appear
asking if you would like to pair a
phone. However, if the system has
been previously paired with another
device, this pop-up will not appear.
SEEING A POP-UP?
?
READY TO REMOVE A PHONE OR AUDIO DEVICE?
When your mobile phone nds the Uconnect system, select “Uconnect.”
6
When prompted on the mobile phone, accept the connection request from Uconnect Phone.
When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your
favorite phone. Selecting “Yes” will make this phone the highest priority. This phone will take precedence over other paired
phones within range, and will connect to the Uconnect system automatically when entering the vehicle.
Only one mobile phone and/or one Bluetooth® audio device can be connected to the Uconnect system at a time.
If “No” is selected, simply select “Uconnect” from the mobile phone/audio device Bluetooth® screen, and the Uconnect
system will reconnect to the Bluetooth® device.
CONNECT YOUR PHONE
Press the “Pairing” button on the touchscreen.
Press “Paired Phones and Audio Devices”.
Press “Settings” next to the phone or device you want to remove.
Press “Delete Device”.
Press “X” to exit the settings screen. The device should be removed.
2
3
4
1
5
Warning & Indicator Lights
©2021 FCA US LLC. All Rights Reserved. Tous droits réservés. Ram is a registered trademark of FCA US LLC. Ram est une marque déposée de FCA US LLC.
App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.
Air Bag BrakeBattery Charge Door Open Electronic Throttle
Control (ETC)
Tire Pressure
Monitoring System
(TPMS)
Parking / Headlights On
Electronic Stability
Control (ESC)
Engine Check /
Malfunction Indicator Vehicle Security
Front Fog High Beam
Cruise Control SET
Turn Signal
Engine Temperature Seat Belt Reminder
Transmission Fault
Oil Pressure
Transmission
Temperature
Engine Oil Level
Anti-Lock Brake
System (ABS)
Electronic Stability
Control (ESC) OFF
Low Fuel
Generic Warning
For additional information on any of the topics in this publication, please refer to your Owner’s Manual.
Second Edition
VM_QSG_EN_USC_AA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

RAM 2021 ProMaster City Quick start guide

RAM
Brand
RAM
Model
2021 ProMaster City
Category
Cars
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents