IVIEW IVIEW-S300 Operating instructions

IVIEW
Brand
IVIEW
Model
IVIEW-S300
Type
Operating instructions

IVIEW IVIEW-S300

The IVIEW IVIEW-S300 is a smart water sensor that can detect water leakage and alert you via the TuyaSmart app. You can use it to protect your home from water damage, and it's easy to install - just peel off the adhesive backing and stick it to the floor or wall in the area you want to monitor.

The sensor has a long battery life of up to 5 years, and it uses low-power Wi-Fi to connect to your home network.

IVIEW IVIEW-S300

The IVIEW IVIEW-S300 is a smart water sensor that can detect water leakage and alert you via the TuyaSmart app. You can use it to protect your home from water damage, and it's easy to install - just peel off the adhesive backing and stick it to the floor or wall in the area you want to monitor.

The sensor has a long battery life of up to 5 years, and it uses low-power Wi-Fi to connect to your home network.

Download App Download App
1.Android phone: download “TuyaSmart” from
GooglePlay.
2.Iphone :download “TuyaSmart” from App Store.
Add DeviceAdd Device Network CongurationNetwork Conguration
1.Run “TuyaSmart”from you smartphone desktop.
2.Register and login
Make Your Home Smarter
For more products please visit
www.szneo.com
WI-FI SMART HOME
INSTRUCTION
SHENZHEN NEO ELECTRONICS CO.,LTD
SpecicationsSpecicationsProduct congurationProduct conguration
Main Function:Main Function:
Customize ScenesCustomize Scenes Share & Push NoticationShare & Push Notication
associate two devices to work to creat your own scene
Share: Share your devices to others directly . (step 1)
Push Notication: Settings---Push Notication. (step2,3)
1
2
3
LED StateLED State
Enter WiFi password Connect phone to device’s
Connecting :
Finished.
1.Smart WiFi: (step1 ,4)
Press and hold the reset button for 6s, the indicator will
blink rapidly. The device is in smart Wi-Fi mode.
1
2
3
4 5
2.Ap Mode: (step2-5)
Press the device reset button again, then the indicator
will blink slowly. The device is in AP mode.
After you enter WiFi password ,it will be “Connect
phone to device’s”,then click “Connect Now”.)
Detect water leakage
Alam Status:
Water Sensor :
Select Device Type,select“Other products” or any type
in the list to add the device.
Device Status
Smart Wi-Fi
AP mode
Alarm
Reset
LED State
Red LED will rapidly blink
Red LED will slowly blink
Led will rapidly blink for 3 times (alarm
will ring 3 times). then rapid blinking
cyclically after slowly blink for 1
time(Alarm rings accordingly )
LED will be on for 4s then OFF, and it
will ready for conguration after 3s
Led will rapidly blink(the rst time
reset) or slowly blink(the second time
reset)
WATER SENSORWATER SENSOR
Battery: CR2 x 1
Standby current10uA
Standby time5 years
Use time4 years (2 times/month)
Wireless Type:2.4GHz
Protocol:IEEE 802.11b/g/n
Wireless Range45m
Operating Temperature:0 40 (32°F104°F)
Operating Humidity: 20% 85%
Storage Temperature:0 60 (32°F 140°F)
Storage Humidity:0% 90%
Protection gradeIP67
Size:67mm x 67mm x 24mm
Led Indicator
light
Adhesive
ring
Holder
Probe interface
Probe
  • Page 1 1

IVIEW IVIEW-S300 Operating instructions

IVIEW
Brand
IVIEW
Model
IVIEW-S300
Type
Operating instructions

IVIEW IVIEW-S300

The IVIEW IVIEW-S300 is a smart water sensor that can detect water leakage and alert you via the TuyaSmart app. You can use it to protect your home from water damage, and it's easy to install - just peel off the adhesive backing and stick it to the floor or wall in the area you want to monitor.

The sensor has a long battery life of up to 5 years, and it uses low-power Wi-Fi to connect to your home network.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents