1
Silicone Sealant Damp Cloth
TOOLS AND MATERIALS:
accepts no liability for any damage to the oor, walls, plumbing or for personal injury during installation.
We recommend consulting a professional if you are unfamiliar with installing kitchen xtures. Signature Hardware
or have questions while installing your Pot Filler, contactCustomer Service.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. If you need assistance
nipple extending ½" from the wall.
A ½" lug ell installed to wood blocking behind the nished wall should be attached to the water supply line with a ½" pipe
ller location behind the nished wall.
For the following installation instructions it is assumed that a cold water supply line has been installed in the desired pot
Before installing, read entire installation instructions. Observe all local building and safety codes.
INSTALLATION INSTRUCTIONS
WALL-MOUNT POT FILLER
Allen Wrench
Thread Sealant or Plumber's Tape
Attach the pot ller handles and secure with the Allen wrench 5.
Make sure the base of the pot ller is rmly against the wall, and wipe away any excess sealant with a damp cloth.4.
Thread your pot ller onto the ½" pipe nipple.3.
Run a bead of silicone sealant along the base of the pot ller.2.
Place thread sealant or plumber’s tape on the ½" pipe nipple.1.
INSTALLATION
/
