Ovios TH8045 Installation guide

Silicone Sealant Damp Cloth

TOOLS AND MATERIALS:

accepts no liability for any damage to the oor, walls, plumbing or for personal injury during installation.

We recommend consulting a professional if you are unfamiliar with installing kitchen xtures. Signature Hardware

or have questions while installing your Pot Filler, contactCustomer Service.

Unpack and inspect the product for any shipping damages. If you nd damages, do not install. If you need assistance

nipple extending ½" from the wall.

A ½" lug ell installed to wood blocking behind the nished wall should be attached to the water supply line with a ½" pipe

ller location behind the nished wall.

For the following installation instructions it is assumed that a cold water supply line has been installed in the desired pot

Before installing, read entire installation instructions. Observe all local building and safety codes.

INSTALLATION INSTRUCTIONS

WALL-MOUNT POT FILLER

Allen Wrench

Thread Sealant or Plumber's Tape

Attach the pot ller handles and secure with the Allen wrench 5.

Make sure the base of the pot ller is rmly against the wall, and wipe away any excess sealant with a damp cloth.4.

Thread your pot ller onto the ½" pipe nipple.3.

Run a bead of silicone sealant along the base of the pot ller.2.

Place thread sealant or plumber’s tape on the ½" pipe nipple.1.

INSTALLATION