Instruction Manual
Dear Customer,
Thank you for choosing a Hanna Product.
Please read the instruction sheet carefully before using the
chemical kit. It will provide you with the necessary information
for correct use of the kit. If you need additional information,
do not hesitate to e-mail us at [email protected].
Remove the chemical kit from the packing material and
examine it carefully to make sure that no damage has
occurred during shipping. If there is any noticeable damage,
notify your Dealer or the nearest Hanna office immediately.
Each kit is supplied with:
•
Demineralizer Bottle with filter cap;
•
1 calibrated plastic beaker (100 ml);
•
Instruction Manual
Note: Any damaged or defective item must be returned in
its original packing materials.
DEMI-02
DEMI-05
DEMI-10
Demineralizer Bottle
www.hannainst.com
SPECIFICATIONS
Note: The exact amount of water that can be demineralized
with a single Demineralizer Bottle varies depending on the
hardness level of the tap water.
HEALTH AND SAFETY
The chemicals contained in this kit may be hazardous if
improperly handled. Read the relevant Health and Safety
Data Sheets before using the kit.
Instruction Manual
Dear Customer,
Thank you for choosing a Hanna Product.
Please read the instruction sheet carefully before using the
chemical kit. It will provide you with the necessary information
for correct use of the kit. If you need additional information,
do not hesitate to e-mail us at [email protected].
Remove the chemical kit from the packing material and
examine it carefully to make sure that no damage has
occurred during shipping. If there is any noticeable damage,
notify your Dealer or the nearest Hanna office immediately.
Each kit is supplied with:
•
Demineralizer Bottle with filter cap;
•
1 calibrated plastic beaker (100 ml);
•
Instruction Manual
Note: Any damaged or defective item must be returned in
its original packing materials.
DEMI-02
DEMI-05
DEMI-10
Demineralizer Bottle
www.hannainst.com
SPECIFICATIONS
Note: The exact amount of water that can be demineralized
with a single Demineralizer Bottle varies depending on the
hardness level of the tap water.
HEALTH AND SAFETY
The chemicals contained in this kit may be hazardous if
improperly handled. Read the relevant Health and Safety
Data Sheets before using the kit.
Instruction Manual
Dear Customer,
Thank you for choosing a Hanna Product.
Please read the instruction sheet carefully before using the
chemical kit. It will provide you with the necessary information
for correct use of the kit. If you need additional information,
do not hesitate to e-mail us at [email protected].
Remove the chemical kit from the packing material and
examine it carefully to make sure that no damage has
occurred during shipping. If there is any noticeable damage,
notify your Dealer or the nearest Hanna office immediately.
Each kit is supplied with:
•
Demineralizer Bottle with filter cap;
•
1 calibrated plastic beaker (100 ml);
•
Instruction Manual
Note: Any damaged or defective item must be returned in
its original packing materials.
DEMI-02
DEMI-05
DEMI-10
Demineralizer Bottle
www.hannainst.com
SPECIFICATIONS
Note: The exact amount of water that can be demineralized
with a single Demineralizer Bottle varies depending on the
hardness level of the tap water.
HEALTH AND SAFETY
The chemicals contained in this kit may be hazardous if
improperly handled. Read the relevant Health and Safety
Data Sheets before using the kit.
Instruction Manual
Dear Customer,
Thank you for choosing a Hanna Product.
Please read the instruction sheet carefully before using the
chemical kit. It will provide you with the necessary information
for correct use of the kit. If you need additional information,
do not hesitate to e-mail us at [email protected].
Remove the chemical kit from the packing material and
examine it carefully to make sure that no damage has
occurred during shipping. If there is any noticeable damage,
notify your Dealer or the nearest Hanna office immediately.
Each kit is supplied with:
•
Demineralizer Bottle with filter cap;
•
1 calibrated plastic beaker (100 ml);
•
Instruction Manual
Note: Any damaged or defective item must be returned in
its original packing materials.
DEMI-02
DEMI-05
DEMI-10
Demineralizer Bottle
www.hannainst.com
SPECIFICATIONS
Note: The exact amount of water that can be demineralized
with a single Demineralizer Bottle varies depending on the
hardness level of the tap water.
HEALTH AND SAFETY
The chemicals contained in this kit may be hazardous if
improperly handled. Read the relevant Health and Safety
Data Sheets before using the kit.
Code Kit for preparation of................DI water
DEMI-02 2 liters
DEMI-05 5 liters
DEMI-10 10 liters
Code Kit for preparation of................DI water
DEMI-02 2 liters
DEMI-05 5 liters
DEMI-10 10 liters
Code Kit for preparation of................DI water
DEMI-02 2 liters
DEMI-05 5 liters
DEMI-10 10 liters
Code Kit for preparation of................DI water
DEMI-02 2 liters
DEMI-05 5 liters
DEMI-10 10 liters
GENERAL DESCRIPTION
INSTRUCTIONS
READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT
• Remove the cap and fill
the Demineralizer Bottle
with tap water.
• Replace the cap and
shake gently for at least
5 minutes.
The demineralized water
is now ready.
• Flip open the top of
the Demineralizer Bottle
cap. Pour out the
deionized water by
gently squeezing the
bottle.
• When the resin is exhausted (its color turns from green
to blue) the Demineralizer Bottle must be replaced.
The Demineralizer Bottle contains a mixed bed ion exchange
resin, that permits to obtain demineralized water from tap
water.
The ion exchange resin contained in the Demineralizer Bottle
is provided with an indicator. When the resin is exhausted,
the indicator will change from green to blue. The Demineralizer
Bottle must be replaced.
This Demineralizer Bottle may be used to prepare DI water
for testing, rinsing or any general use that requires DI
water.
ACCESSORIES
ISTDEMIR1 05/02 PRINTED IN ITALY
HI 740036 100 mL plastic beaker (6 pcs).
HI 740034 Cap for 100 mL plastic beaker (6 pcs).
GENERAL DESCRIPTION
INSTRUCTIONS
READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT
• Remove the cap and fill
the Demineralizer Bottle
with tap water.
• Replace the cap and
shake gently for at least
5 minutes.
The demineralized water
is now ready.
• Flip open the top of
the Demineralizer Bottle
cap. Pour out the
deionized water by
gently squeezing the
bottle.
• When the resin is exhausted (its color turns from green
to blue) the Demineralizer Bottle must be replaced.
The Demineralizer Bottle contains a mixed bed ion exchange
resin, that permits to obtain demineralized water from tap
water.
The ion exchange resin contained in the Demineralizer Bottle
is provided with an indicator. When the resin is exhausted,
the indicator will change from green to blue. The Demineralizer
Bottle must be replaced.
This Demineralizer Bottle may be used to prepare DI water
for testing, rinsing or any general use that requires DI
water.
ACCESSORIES
ISTDEMIR1 05/02 PRINTED IN ITALY
HI 740036 100 mL plastic beaker (6 pcs).
HI 740034 Cap for 100 mL plastic beaker (6 pcs).
GENERAL DESCRIPTION
INSTRUCTIONS
READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT
• Remove the cap and fill
the Demineralizer Bottle
with tap water.
• Replace the cap and
shake gently for at least
5 minutes.
The demineralized water
is now ready.
• Flip open the top of
the Demineralizer Bottle
cap. Pour out the
deionized water by
gently squeezing the
bottle.
• When the resin is exhausted (its color turns from green
to blue) the Demineralizer Bottle must be replaced.
The Demineralizer Bottle contains a mixed bed ion exchange
resin, that permits to obtain demineralized water from tap
water.
The ion exchange resin contained in the Demineralizer Bottle
is provided with an indicator. When the resin is exhausted,
the indicator will change from green to blue. The Demineralizer
Bottle must be replaced.
This Demineralizer Bottle may be used to prepare DI water
for testing, rinsing or any general use that requires DI
water.
ACCESSORIES
ISTDEMIR1 05/02 PRINTED IN ITALY
HI 740036 100 mL plastic beaker (6 pcs).
HI 740034 Cap for 100 mL plastic beaker (6 pcs).
GENERAL DESCRIPTION
INSTRUCTIONS
READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT
• Remove the cap and fill
the Demineralizer Bottle
with tap water.
• Replace the cap and
shake gently for at least
5 minutes.
The demineralized water
is now ready.
• Flip open the top of
the Demineralizer Bottle
cap. Pour out the
deionized water by
gently squeezing the
bottle.
• When the resin is exhausted (its color turns from green
to blue) the Demineralizer Bottle must be replaced.
The Demineralizer Bottle contains a mixed bed ion exchange
resin, that permits to obtain demineralized water from tap
water.
The ion exchange resin contained in the Demineralizer Bottle
is provided with an indicator. When the resin is exhausted,
the indicator will change from green to blue. The Demineralizer
Bottle must be replaced.
This Demineralizer Bottle may be used to prepare DI water
for testing, rinsing or any general use that requires DI
water.
ACCESSORIES
ISTDEMIR1 05/02 PRINTED IN ITALY
HI 740036 100 mL plastic beaker (6 pcs).
HI 740034 Cap for 100 mL plastic beaker (6 pcs).
-
1
-
2
Hanna Instruments DEMI-10 User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hanna Instruments HI83225 Owner's manual
-
-
-
-
Hanna Instruments HI38015 Owner's manual
-
-
-
-
-
Other documents
-
Smeg SF4606WMCNX Owner's manual
-
Consew CES-90 User manual
-
Consew CES-85 User manual
-
Consew CES-300 User manual
-
Hach DR/700 Procedures Manual
-
Electrolux Caf Line EUCAICL User manual
-
Walton SW2 Owner's manual
-
wtw P 700 IQ Preparation Instructions
-
Condair 04 Draabe SynPur Owner's manual
-
Omega CDB-210 and CDB-215 Owner's manual
