Atlantis WebShare A02-WS1 User manual

Where solutions begin

ISO 9001:2000 Certified Company

WebShare System

Wireless ADSL2+ Router

Wireless USB Adapter

MULTILANGUAGE

Quick Start Guide

A02-WS1_GX01

Where solutions begin

Company certified ISO 9001:2000

ITALIANO

Questo prodotto è coperto da garanzia Atlantis Land On-Center

della durata di 2 anni. Per maggiori dettagli in merito o per

accedere alla documentazione completa in Italiano fare riferimento

al sito www.atlantis-land.com.

ENGLISH

This product is covered by Atlantis Land 2 years On-Center

warranty. For more detailed informations please refer to the web

site www.atlantis-land.com.

For more detailed instructions on configuring and using the Switch,

please refer to the online manual.

FRANCAIS

Ce produit est couvert par une garantie Atlantis Land On-Center

de 2 ans. Pour des informations plus détaillées, référez-vous svp

au site Web www.atlantis-land.com.

DEUTSCH

Dieses Produkt ist durch die Atlantis Land 2 Jahre On-Center

Garantie gedeckt. Für weitere Informationen, beziehen Sie sich

bitte auf Web Site www.atlantis-land.com.

ESPAÑOL

Este producto està cubierto de garantía Atlantis Land On-Center por

2 años. Para una información más detallada, se refiera por favor al

Web site www.atlantis-land.com.

Where solutions begin

Company certified ISO 9001:2000

The award of the information is facultative, but its lack will prevent

ATLANTIS LAND® from starting the Guarantee process requested.

Copyright

The Atlantis Land logo is a registered trademark of Atlantis Land

SpA. All other names mentioned mat be trademarks or registered

trademarks of their respective owners. Subject to change without

notice. No liability for technical errors and/or omissions.

R

e

g

i

s

t

e

r

y

o

u

r

p

r

o

d

u

c

t

!

w

.

a

t

l

a

n

t

i

s

-

l

a

n

d

.

c

o

m

Registration on the web site

www.atlantis-land.com

within 15 days

from the purchase of the product dismiss

the customer from showing a valid proof of

purchase (Sale Receipt or Invoice) in case

of the request of intervention. For further

information we invite you to look at our web

site at the section WARRANTY.

MULTILANGUAGE QUICK START GUIDE

WebShare System 4

ITALIANO

1.1 Contenuto della confezione .......................................................................... 9

1.2 I LED frontali ................................................................................................... 9

1.3 Le porte posteriori ........................................................................................ 10

1.4 Cablaggio ...................................................................................................... 11

1.5 Settaggi di Default........................................................................................ 12

1.6 Configurazione di IE .................................................................................... 12

1.7 Configurazione del PC................................................................................. 12

Configurazione del PC in Windows 95/98/ME............................. 12

Configurazione del PC in Windows NT4.0................................... 13

Configurazione del PC in Windows 2000.................................... 13

Configurazione del PC in Windows XP ....................................... 13

1.8 Configurazione Router................................................................................. 15

PPPoE/PPPoA................................................................................. 18

Static IP Address............................................................................. 20

1.9 Installazione e configurazione del Client USB ......................................... 21

Requisiti di sistema ......................................................................... 21

Installazione Hardware ................................................................... 21

Connessione al Router WIreless................................................... 24

1.10 Supporto Offerto......................................................................................... 26

ENGLISH

1.1 Package contents......................................................................................... 31

1.2 The Front Panel LEDs................................................................................. 31

1.3 The Rear Ports ............................................................................................. 32

1.4 Cabling........................................................................................................... 33

1.5 Default Settings ............................................................................................ 33

Before Configuration ....................................................................... 33

1.6 IE Configuration............................................................................................ 34

1.7 TCP/IP Configuration................................................................................... 34

Configuring PC (Windows 95/98/ME)........................................... 34

Configuring PC (Windows NT4.0)............................................... 35

Configuring PC (Windows 2000).................................................. 35

Configuring PC (WindowsXP) ..................................................... 35

1.8 Browser configuration.................................................................................. 38

PPPoE/PPPoA................................................................................. 40

Static IP Address............................................................................. 41

1.9 Software Installation ................................................................................... 42

MULTILANGUAGE QUICK START GUIDE

WebShare System 5

System Requirements .................................................................... 42

Hardware and Software Installation............................................. 42

Using the Configuration Utility ....................................................... 43

Connect 45

1.10 Product Support ......................................................................................... 46

FRANCAIS

1.1 Contenu de la boîte...................................................................................... 51

1.2 Face avant .................................................................................................... 51

1.3 Face arrière................................................................................................... 52

1.4 Câblage ......................................................................................................... 53

1.5 Configuration initiale .................................................................................... 53

1.6 Configuration du TCP/IP ............................................................................. 54

Configuration sous Windows 95/98/ME ....................................... 54

Configuration sous Windows NT4.0 ............................................. 54

Configuration sous Windows 2000 ............................................. 55

Configuration sous Windows XP................................................. 55

1.7 Vérification .................................................................................................... 57

1.8 Configuration avec le Browser ................................................................... 58

PPPoE/PPPoA................................................................................. 61

Static IP Address............................................................................. 62

1.9 Installation sous Windows de l’Adaptateur USB Wireless ..................... 63

Requises de système...................................................................... 63

Logiciel de configuration................................................................. 64

Sélectionner le réseau .................................................................... 65

1.10 Support........................................................................................................ 66

ESPAÑOL

1.1 Contenido de la caja.................................................................................... 72

1.2 Los LED frontales......................................................................................... 72

1.3 Los puertos posteriores............................................................................... 73

1.4 Cableado ....................................................................................................... 74

1.5 Configuración de fábrica ............................................................................. 75

1.6 Configuracciòn del PC................................................................................. 75

Configuración del PC en Windows 95/98/ME ............................. 75

Configuración del PC en Windows NT 4.0 .................................. 76

Configuración del PC en Windows 2000 .................................... 76

Configuración del PC en Windows XP........................................ 76

1.7 Configuración de Internet Explorer............................................................ 79

Page is loading ...

ITALIANO

WebShare System 16

Apparirà a questo punto il Menù Principale, nella cui parte superiore è

possibile accedere (come se si stessero vedendo i links in una homepage)

a tutte le sezioni disponibili:

• Quick Start (Run Wizard)

• Interface Setup(Internet, LAN)

• Advanced Setup(Firewall, Routing, NAT, ADSL)

• Acess Management(ACL, IP Filter, SNMP, UPnP, DDNS)

• Maintenance(Administration, Time Zone, Firmware, SysRestart,

Diagnostics)

• Status(Device Info, System Log, Statistics)

• Help

Cliccando sulla sezione desiderata, nello spazio della homepage

appariranno tutti i settaggi relativi alla configurazione della sezione scelta,

oppure si apriranno tutta una serie di sottosezioni tra cui scegliere prima di

avere accesso alle configurazione vere e proprie.

Seguendo i successivi passi è possibile rendere operativo il WebShare

Wireless Router ADSL2+ in pochissimo tempo a patto di usare le

macchine della Lan configurate come client DHCP. Al solito per una

Page is loading ...

ENGLISH

WebShare System 27

Copyright Statement

No part of this publication may be reproduced, stored in a retrieval system,

or transmitted in any form or by any means, whether electronic,

mechanical, photocopying, recording or otherwise without the prior writing

of the publisher. Windows™ 98SE/2000/ME/XP are trademarks of

Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved.

The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All

other names mentioned mat be trademarks or registered trademarks of

their respective owners. Subject to change without notice. No liability for

technical errors and/or omissions.

Wireless LAN, Health and Authorization for use

Radio frequency electromagnetic energy is emitted from Wireless LAN

devices. The energy levels of these emissions however are far much less

than the electromagnetic energy emissions from wireless devices like for

example mobile phones. Wireless LAN devices are safe for use frequency

safety standards and recommendations. The use of Wireless LAN devices

may be restricted in some situations or environments for example:

·On board of airplanes, or

·In an explosive environment, or

·In case the interference risk to other devices or services is perceived or

identified as harmful

In case the policy regarding the use of Wireless LAN devices in specific

organizations or environments (e.g. airports, hospitals, chemical/oil/gas

industrial plants, private buildings etc.) is not clear, please ask for

authorization to use these devices prior to operating the equipment.

Regulatory Information/disclaimers

Installation and use of this Wireless LAN device must be in strict

accordance with the instructions included in the user documentation

provided with the product. Any changes or modifications made to this

device that are not expressly approved by the manufacturer may void the

user’s authority to operate the equipment. The Manufacturer is not

responsible for any radio or television interference caused by unauthorized

modification of this device, of the substitution or attachment. Manufacturer

and its authorized resellers or distributors will assume no liability for any

damage or violation of government regulations arising from failing to

comply with these guidelines.

ENGLISH

WebShare System 28

CE Mark Warning

This is a Class B product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to take

adequate measures.

CE in which Countries where the product may be used freely:

Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece,

Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and

Iceland.

France: except the channel 10 through 13, law prohibits the use of other

channels.

CE/EMC Restriction of Liability

The product described in this handbook was designed, produced and

approved according to the EMC-regulations and is certified to be within

EMC limitations.

If the product is used in an uncertified PC, the manufacturer undertakes no

warranty in respect to the EMC limits. The described product in this

handbook was constructed, produced and certified so that the measured

values are within EMC limitations. In practice and under special

circumstances, it may be possible, that the product may be outside of the

given limits if it is used in a PC that is not produced under EMC

certification. It is also possible in certain cases and under special

circumstances, which the given EMC peak values will become out of

tolerance. In these cases, the user himself is responsible for compliance

with the EMC limits.

Declaration of Conformity

This equipment has been tested and found to comply with Directive

1999/5/CE of the European Parliament and of the Council on radio

equipment and telecommunications terminal equipment and the mutual

recognition of their conformity. After assessment, the equipment has been

found to comply with the following standards: EN 300.328 (radio), EN 301

489-1, EN 301 489-17 (electromagnetic compatibility) and EN 60950

(safety). This equipment may be used in all European Union contries and in

all countries applying Directive 1999/5/CE, without restriction, with the

exception of the following countries:

France:When this equipment is used outdoors, output power is limited to

within the frequency bans listed on the chart. For more info, consult the

website www.art-telecom.fr

.

Location Frequency Band (MHz) Power (EIRP)

Indoor (no restriction) 2400-2483,5 100mW(20dBm)

ENGLISH

WebShare System 29

Outdoor 2400-2454

2454-2483,5

100mW(20dBm)

10mW(10dBm)

Italy: For more info, consult the website www.comunicazioni.it

ENGLISH

WebShare System 30

For more detailed instructions on configuring and using the

WebShare Wireless Router ADSL2+, please refer to the online manual

or Interactive guide on the CD (Vera).

Before beginning the configuration of the Router you have to know the

parameters of your subscription ADSL.

There are five ways ─ PPPoE, PPPoA, RFC1483 routed, IPoA, RFC1483

Bridge─ for the device to have a public IP address and then to access

Internet. You have to check with your ISP about which way is adopted.

VPI/VCI: Consult the telephone company to get the Virtual Path Identifier

(VPI) and Virtual Channel Identifier (VCI) numbers. The valid range for the

VPI is 0 to 255 and for the VCI is 32 to 65535. The default value VPI is 0

and VCI is 32. For BT (VPI=0, VCI=38) and for KC (VPI=1,

VCI=50). NAT: The NAT feature allows multiple-user Internet access for

the cost of a single IP account. If you need to have a public server or a

public network, NAT has to be disabled. Encapsulation

Method: Be sure to use the encapsulation method (LLC/SNAP or VC

MUX) required by your ISP. Gather the information as

illustrated in the following table and keep it for reference.

PPPoE

VPI and VCI

VC-based / LLC-based multiplexing

Username and Password

Service Name

PPPoA

VPI and VCI

VC-based / LLC-based multiplexing

Username and Password

RFC1483 Bridged

VPI/VCI

VC-based / LLC-based multiplexing

RFC1483 Routed

VPI/VCI

VC-based / LLC-based multiplexing

IP address

Subnet mask

Default Gateway (IP address)

IP address (DNS)

ENGLISH

WebShare System 31

1.1 Package contents

WebShare Wireless ADSL2+ Router, CD-Rom with manual, Quick Start

Guide, Vera Multilanguage Interactive Tutorial, cable RJ11 ADSL, cable

CAT5 LAN, Power Adapter AC-DC and Wireless USB Adapter.

1.2 The Front Panel LEDs

LED MEANING

PWR

Lit when power ON.

SYS

Lit when system is ready.

WLAN

Flashes green when the wireless connection is established.

Flashes when sending/receiving data. Lit when Wireless

interface is ON.

LAN

Lit when connected to Ethernet device

Green for 100Mbps; Orange for 10Mbps

Blinking when data transmit/received.

ADSL

Lit when successfully connected to an ADSL DSLAM.

PPP

Lit when there is a PPPoA/PPPoE connection.

ENGLISH

WebShare System 32

1.3 The Rear Ports

PORT MEANING

ADSL (RJ11)

Connect the supplied RJ-11 cable to this port

when connecting to the ADSL/telephone network.

LAN

(RJ-45)

Connect an UTP Ethernet cable to one of the

four LAN ports when connecting to a PC or an

office/home network of 10Mbps or 100Mbps.

RESET

After the device has turned on, press it to reset

the device or restore to factory default settings.

The operation is as below:

• 0-3 seconds: reset the device.

• 3-5 seconds: no action.

• 6 seconds or above: restore to factory

default settings (this is used when you

can not login to the router, e.g. forgot

the password).

ENGLISH

WebShare System 33

POWER (jack)

Connect the supplied power adapter to this jack.

POWER( Switch)

A Power ON/OFF switch.

1.4 Cabling

First you must connect the product to the ADSL line through the RJ11

cable you have in equipment (in the port LINE), then connect to the RJ45

ports the PCs of your Lan or others Switch. You can get to the Wireless

Router through the different client wireless compatible with the

IEEE802.11b & IEEE802.11g standard (please check 1.9). In the end

connect the AC Adapter to the Wireless Router ADSL2+ and then to the

socket. Once you’ve checked all the connections and you’ve switched on

the Wireless Router ADSL2+ the product will carry on immediately a

diagnosis (60 seconds). Finished this the Led PWR, SYS (eventually even

the Led LAN, if connected to PCs) will be fixed green (WLAN is blinking

when wireless module is loaded) . The Led ADSL, if suitably connected, at

first will be flashing and then it will remain fixed. You have to read Note

(into section 1.8) in order to solve this problem

1.5 Default Settings

The WebShare Wireless Router ADSL2+ can be configured with your Web

browser. The web browser is included as a standard application in

following operation systems, UNIX, Linux, Mac OS, Windows

95/98/NT/2000/Me, etc. The product provides a very easy and user-friendly

interface for configuration.

Before Configuration

This section describes the configuration required by LAN-attached PCs that

communicate with the WebShare Wireless Router ADSL2+, either to

configure the device, or for network access. These PCs must have an

Ethernet interface installed properly, be connected to the

WebShare Wireless Router ADSL2+ either directly or through an external

repeater hub, and have TCP/IP installed and configured to obtain an IP

address through a DHCP server or a fixed IP address that must be in the

same subnet of the Wireless ADSL Router. The default IP address of the

ENGLISH

WebShare System 34

WebShare Wireless Router ADSL2+ is 192.168.1.254 and subnet mask is

255.255.255.0. The best and easy way is to configure the PC (client

DHCP) to get an IP address from the WebShare Wireless Router ADSL2+.

Please follow the steps below for PC’s network environment installation.

First of all, please check your PC’s network components. The TCP/IP

protocol stack and Ethernet network adapter must be installed. If not,

please refer to MS Windows relative manuals.

Before you configure this WebShare Wireless Router ADSL2+, you need to

know the following default settings:

• Username: admin

• Password: atlantis

• IP address (192.168.1.254), Subnet Mask (255.255.255.0)

• DHCP Server: enable (from 192.168.1.100 to 192.168.1.199)

• WAN=PPPoA Routing, VPI=8, VCI=35, VC-Mux

• SSSID= WebShare, Channel=6, WEP/WPA=disable

1.6 IE Configuration

Now open IE, go to Instruments menu, select the Connections tab and

select one of the following options:

• Never use remote connection

• Use remote connection if another network connection isn’t

available

1.7 TCP/IP Configuration

Configuring PC (Windows 95/98/ME)

1. Go to Start / Settings / Control Panel. In the Control Panel,

double-click on Network and choose the Configuration tab.

2. Select TCP / IP -> NIC Compatible, or the name of any Network

Interface Card (NIC) in your PC.

3. Click Properties.

ENGLISH

WebShare System 35

4. Select the IP Address tab. In this page, click the Obtain an IP

address automatically radio button.

5. Then select the DNS Configuration tab.

6. Select the Disable DNS radio button and click “OK” to finish the

configuration.

Configuring PC (Windows NT4.0)

1. Go to Start / Settings / Control Panel. In the Control Panel,

double-click on Network and choose the Protocols tab.

2. Select TCP/IP Protocol and click Properties.

3. Select the Obtain an IP address from a DHCP server radio button

and click OK.

Configuring PC (Windows 2000)

1. Go to Start / Settings / Control Panel. In the Control Panel,

double-click on Network and Dial-up Connections.

2. Double-click LAN Area Connection.

3. In the LAN Area Connection Status window, click Properties.

4. Select Internet Protocol (TCP/IP) and click Properties.

5. Select the Obtain an IP address automatically and the Obtain

DNS server address automatically radio buttons.

6. Click OK to finish the configuration.

Configuring PC (WindowsXP)

1. Go to Start / Control Panel (in Classic View). In the Control Panel,

double-click on Network Connections.

2. Double-click Local Area Connection.

ENGLISH

WebShare System 36

3. In the LAN Area Connection Status window, click Properties.

4. Select Internet Protocol (TCP/IP) and click Properties.

5. Select the Obtain an IP address automatically and the Obtain

DNS server address automatically radio buttons.

ENGLISH

WebShare System 37

6. Click OK to finish the configuration

ENGLISH

WebShare System 38

1.8 Browser configuration

Open the web browser, enter the local port IP address of this

WebShare Wireless Router ADSL2+, which default at 192.168.1.254, and

click “Go” to get the login page.

The default username is admin, password atlantis and click “OK” to

continue.

At the configuration homepage, the left navigation pane where bookmarks

are provided links you directly to the desired setup page, including:

• Quick Start (Run Wizard)

• Interface Setup(Internet, LAN)

• Advanced Setup(Firewall, Routing, NAT, ADSL)

• Acess Management(ACL, IP Filter, SNMP, UPnP, DDNS)

• Maintenance(Administration, Time Zone, Firmware, SysRestart,

Diagnostics)

• Status(Device Info, System Log, Statistics)

• Help

Click on the desired item to expand the page with all settings in the main

navigation panel.

Following next steps you can make operating WebShare Wireless Router

ADSL2+ in short time using PCs in DHCP mode. Refer to manual on

Installation CD if you need personalized configuration.

ENGLISH

WebShare System 39

If the ADSL Led flashes periodically You have to force

modulation. Click on Advanced Configuration, then

ADSL. On the combo-box ADSL Mode please choose

ADSL modulation, then click on Save.

Click on Quick Start then Run Wizard to perform an automatic protocol

selection.

The following screen will appear. Please click Next to continue.

You can change the password as you like and then click Next to continue.

Select your time zone from the drop down list. Please click Next to

continue.

Select how the router will set up the Internet connection: PPPoE/PPPoA:

to obtain IP automatically (You need username and password).

Static IP address: this configuration is valid in case of a subscription with

a static IP.

ENGLISH

WebShare System 40

PPPoE/PPPoA

PPPoE (PPP over Ethernet) is an ADSL connection known as dial-up

DSL. As the PPPoA it has been created to integrate large band services

paying a particular attention to an easy configuration. The user can obtain

an high access speed and he can also share the same account with the

ISP. No additional software are required. This configuration is valid in case

of a subscription with a static IP and active NAT (SUA) (for the managing

of the public class turn to the CD handbook). Let’s see how to configure

correctly this kind of ADSL configuration.

Insert Username and Password and make sure that the parameters are,

in case of PPPoA, the ones in the picture, if not specifically shown by the

ISP.

Page is loading ...

Atlantis WebShare A02-WS1 User manual

This manual is also suitable for

Atlantis WebShare A02-WS1 User manual

in other languages

Related papers

Other documents