3
Aquesta funció encén o posa en espera la nevera. Per
posar l'aparell en mode d'espera, mantingueu premut
el botó On/Stand-by
durant 3 segons. Quan l’aparell
està en espera, el llum de dins del compartiment de la
nevera no funciona. Recordeu que aquesta funció no
desconnecta l'aparell de la xarxa elèctrica. Per tornar
a encendre l’aparell, només heu de prémer el botó On/
Stand-By
.
Aquesta funció opcional es pot fer servir per
estalviar energia. Per activar o desactivar la funció
Pantalla intel·ligent, premeu els botons Vacances
i
Refrigeració ràpida
alhora durant 3 segons fins que
sentiu un senyal acústic.
Després d'activar la funció Pantalla intel·ligent, la
pantalla s'apagarà, tret de l'indicador
Sense Fresh Control /
4
1. INSTALLING TWO APPLIANCES
During installing the freezer and the fridge
together ensure that the freezer is located on the left and
the fridge on the right (as shown on the drawing). Left side
of refrigerator is equipped with special device in order to
avoid condensation problems between appliances.
We recommended installing two appliances together
using the linking-kit (as shown on the drawing).
You can buy it in Service.
2. FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy.
Please follow the instructions contained in the Quick
Start Guide to activate/deactivate the function.
Two seconds after activation of the Smart Display, the
display goes off. To adjust the temperature or use other
functions, it is necessary to activate the display by
pressing any button. After about 15 seconds without
performing any action, the display goes off again.
When function is deactivated the normal display is
restored. The Smart Display is automatically disabled
after a power failure. Remember that this function does
not disconnect the appliance from the power supply,
but only reduce the energy consumed by external
display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
This function is available only on the model with User
Interface on the door.
2.2. 6th SENSE /
GREEN INTELLIGENCE
The 6th Sense/ Green Intelligence function works to
maintain the right temperature in the following cases:
- Door opened for a while
The function activates when door opening causes the
internal temperature to increase to values that do not
ensure safe storage of food and remains active until
optimal storage conditions have been restored.
- Fresh food stored in the freezer
The function activates when fresh food is placed in the
freezer and remains active until optimal freezing
conditions are reached so as to ensure the best
freezing quality with the lowest power consumption.
Note: Besides the quantity of food loaded into the
freezer, ambient temperature and the quantity of food
already inside the freezer affect the duration of the 6th
Sense/ Green Intelligence function. Therefore
significant duration variations are quite normal.
*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.
Green Intelligence
ProFresh. Si la funció Pantalla intel·ligent està activada,
per ajustar la temperatura o utilitzar altres funcions, cal
que activeu la pantalla prement qualsevol botó.
Després de 15 segons sense realitzar cap acció,
la pantalla tornarà a apagar-se i només romandrà
visible l'indicador
Sense Fresh Control /
4
1. INSTALLING TWO APPLIANCES
During installing the freezer and the fridge
together ensure that the freezer is located on the left and
the fridge on the right (as shown on the drawing). Left side
of refrigerator is equipped with special device in order to
avoid condensation problems between appliances.
We recommended installing two appliances together
using the linking-kit (as shown on the drawing).
You can buy it in Service.
2. FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy.
Please follow the instructions contained in the Quick
Start Guide to activate/deactivate the function.
Two seconds after activation of the Smart Display, the
display goes off. To adjust the temperature or use other
functions, it is necessary to activate the display by
pressing any button. After about 15 seconds without
performing any action, the display goes off again.
When function is deactivated the normal display is
restored. The Smart Display is automatically disabled
after a power failure. Remember that this function does
not disconnect the appliance from the power supply,
but only reduce the energy consumed by external
display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
This function is available only on the model with User
Interface on the door.
2.2. 6th SENSE /
GREEN INTELLIGENCE
The 6th Sense/ Green Intelligence function works to
maintain the right temperature in the following cases:
- Door opened for a while
The function activates when door opening causes the
internal temperature to increase to values that do not
ensure safe storage of food and remains active until
optimal storage conditions have been restored.
- Fresh food stored in the freezer
The function activates when fresh food is placed in the
freezer and remains active until optimal freezing
conditions are reached so as to ensure the best
freezing quality with the lowest power consumption.
Note: Besides the quantity of food loaded into the
freezer, ambient temperature and the quantity of food
already inside the freezer affect the duration of the 6th
Sense/ Green Intelligence function. Therefore
significant duration variations are quite normal.
*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.
Green
Intelligence ProFresh. Quan la funció es desactiva,
es restaura la pantalla normal. La funció Pantalla
intel·ligent es desactiva automàticament després
d'un tall de corrent. Recordeu que aquesta funció no
desconnecta l'aparell de la xarxa de subministrament
elèctric, sinó que tan sols redueix el consum energètic
de la pantalla externa.
El consum energètic declarat de l'aparell fa
referència al funcionament amb la funció Pantalla
intel·ligent activada.
4
1. INSTALLING TWO APPLIANCES
During installing the freezer and the fridge
together ensure that the freezer is located on the left and
the fridge on the right (as shown on the drawing). Left side
of refrigerator is equipped with special device in order to
avoid condensation problems between appliances.
We recommended installing two appliances together
using the linking-kit (as shown on the drawing).
You can buy it in Service.
2. FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy.
Please follow the instructions contained in the Quick
Start Guide to activate/deactivate the function.
Two seconds after activation of the Smart Display, the
display goes off. To adjust the temperature or use other
functions, it is necessary to activate the display by
pressing any button. After about 15 seconds without
performing any action, the display goes off again.
When function is deactivated the normal display is
restored. The Smart Display is automatically disabled
after a power failure. Remember that this function does
not disconnect the appliance from the power supply,
but only reduce the energy consumed by external
display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
This function is available only on the model with User
Interface on the door.
2.2. 6th SENSE /
GREEN INTELLIGENCE
The 6th Sense/ Green Intelligence function works to
maintain the right temperature in the following cases:
- Door opened for a while
The function activates when door opening causes the
internal temperature to increase to values that do not
ensure safe storage of food and remains active until
optimal storage conditions have been restored.
- Fresh food stored in the freezer
The function activates when fresh food is placed in the
freezer and remains active until optimal freezing
conditions are reached so as to ensure the best
freezing quality with the lowest power consumption.
Note: Besides the quantity of food loaded into the
freezer, ambient temperature and the quantity of food
already inside the freezer affect the duration of the 6th
Sense/ Green Intelligence function. Therefore
significant duration variations are quite normal.
*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.
Aquesta funció permet assolir ràpidament unes
condicions d'emmagatzematge òptimes (pel que fa
a la temperatura i a la humitat) a l'interior de l'aparell.
També s'ha d'encendre el ventilador perquè funcioni
correctament. La funció 6th Sense Fresh Control /
Green Intelligence ProFresh està activada per defecte.
Per activar o desactivar aquesta funció, vegeu la Guia
ràpida subministrada.
Després d'un tall de corrent o de passar del mode
d'espera al mode normal, l'estat de la funció 6th
Sense Fresh Control / Green Intelligence ProFresh es
restableix a l'ajustament predefinit, és a dir, activat.
La icona Alarma
s'encén intermitentment i se sent
un senyal acústic. L'alarma s'activa quan la porta es
deixa oberta durant més de 2 minuts. Per desactivar
l'alarma de la porta, tanqueu la porta o premeu el botó
Aturada d'alarma un cop per silenciar-ne el senyal
acústic.
Aquesta funció es pot activar per tal de reduir el
consum energètic de l'aparell durant un període
d'absència.
Abans d'activar aquesta funció, traieu tots els aliments
peribles de la nevera i tanqueu bé la porta, ja que la
nevera mantindrà una temperatura adequada per tal
d'evitar la formació l'olors desagradables (+12 °C).
Per activar o desactivar la funció, premeu el botó
del mode Vacances durant 3 segons. Un cop s'ha
habilitat la funció, el símbol corresponent s'encén i la
temperatura del compartiment de la nevera s'ajustarà a
un valor més alt (la pantalla de la temperatura mostrarà
el nou valor de temperatura de +12 °C).
Canviar el valor de la temperatura desactivarà
automàticament aquesta funció.
Per garantir un rendiment òptim, les funcions Vacances
i Refrigeració ràpida no es poden fer servir alhora. Per
tant, si ja heu activat la funció Refrigeració ràpida, cal
que la desactiveu per poder activar la funció Vacances
(i viceversa).
La funció Refrigeració ràpida
permet incrementar la
capacitat de refrigeració al compartiment de la nevera.
Per tal de maximitzar la capacitat de refrigeració,
mantingueu el ventilador encès.
Per garantir un rendiment òptim, les funcions Vacances
i Refrigeració ràpida no es poden fer servir alhora.
Per tant, si ja heu activat la funció Vacances, cal que
la desactiveu per poder activar la funció Refrigeració
ràpida (i viceversa).
*Només disponible en alguns models seleccionats. Comproveu a la GUIA RÀPIDA si aquesta funció està disponible al vostre model.