Sony HTP-78SS User manual

Category
Audio tuners
Type
User manual

This manual is also suitable for

©2007 Sony Corporation
3-209-590-11(1)
DVD Home
Theatre System
Operating Instructions
HTP-78SS
2
GB
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, table-cloths, curtains,
etc. And don’t place lighted candles on the
apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Batteries or batteries installed apparatus shall not be
exposed to excessive heat such as sunshine, fire or
the like.
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
Don’t throw away batteries with
general house waste; dispose of
them correctly as chemical waste.
For customers in Europe
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European
Union and other European countries
with separate collection systems)
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. The Authorized Representative for
EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.
WARNING
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
This symbol on the product or on its
packaging indicates that this product
shall not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for
the recycling of electrical and
electronic equipment. By ensuring this
product is disposed of correctly, you
will help prevent potential negative
consequences for the environment and
human health, which could otherwise
be caused by inappropriate waste
handling of this product. The recycling
of materials will help to conserve
natural resources. For more detailed
information about recycling of this
product, please contact your local
Civic Office, your household waste
disposal service or the shop where you
purchased the product.
3
GB
About This Manual
The instructions in this manual are for model
HTP-78SS. Check your receiver’s model number
by looking at the lower right corner of the front
panel.
The HTP-78SS consists of:
Receiver STR-KS1100
DVD player DVP-NS78H
Speaker system
a)
Front speakers SS-MSP1100
Center speaker SS-CNP1100
Surround speakers SS-SRP1100
Sub woofer SS-WP1100
a)
Be sure to use only the supplied speakers.
The instructions in this manual describe the
controls on the supplied remote. You can also use
the controls on the receiver if they have the same
or similar names as those on the remote. For
details on the use of your DVD player, refer to the
operating instructions supplied with the DVD
player.
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.
**“DTS” and “DTS Digital Surround” are
registered trademarks of DTS, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
TM
) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Note for the supplied remote
(RM-AAU017)
The VIDEO 3 button on the remote is not
available for receiver operation.
4
GB
Table of Contents
Getting Started
Description and location of parts...................5
1: Installing speakers ...................................11
2: Connecting speakers................................13
3: Connecting the audio/video
components.............................................14
4: Connecting the antennas..........................19
5: Preparing the receiver and the remote .....20
6: Calibrating the appropriate settings
automatically
(AUTO CALIBRATION) .......................21
7: Adjusting the speaker levels and
balance (TEST TONE) ...........................25
Playback
Selecting a component.................................26
Listening/Watching a component ................27
Amplifier Operations
Navigating through menus...........................29
Adjusting the level (LEVEL menu).............32
Adjusting the tone (TONE menu) ...............33
Settings for the surround sound
(SUR menu)............................................33
Settings for the tuner (TUNER menu).........34
Settings for the audio (AUDIO menu).........34
Settings for the system (SYSTEM menu) ...35
Calibrating the appropriate settings
automatically (A. CAL menu) ................37
Enjoying Surround Sound
Enjoying Dolby Digital and DTS Surround
sound (AUTO FORMAT DIRECT)....... 37
Selecting a pre-programmed sound field .... 39
Using only the front speakers and sub
woofer (2CH STEREO)......................... 41
Resetting sound fields to the initial
settings ................................................... 42
Tuner Operations
Listening to FM/AM radio.......................... 42
Presetting radio stations.............................. 44
Using the Radio Data System (RDS).......... 45
Other Operations
Enjoying the DIGITAL MEDIA PORT
(DMPORT) ............................................ 47
Using the Sleep Timer ................................ 49
Using the Remote
Changing button assignments ..................... 49
Additional Information
Glossary ...................................................... 50
Precautions.................................................. 51
Troubleshooting .......................................... 53
Specifications.............................................. 56
Index ........................................................... 58
5
GB
Getting Started
Description and location of parts
Front panel
Getting Started
Receiver
DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER
MASTER VOLUME
AUTO CAL MIC
INPUT SELECTOR
PRESET TUNING
SOUND FIELD MUTING
?/1
2 431 5
67q; 89
Name Function
A ?/1
(on/standby)
Press to turn the receiver
on or off (page 20, 27, 28,
42).
B Remote sensor Receives signals from
remote commander.
C Input lamps The lamp of the chosen
input source lights up
(page 26).
D Display The current status of the
selected component or a
list of selectable items
appears here (page 6).
E MASTER
VOLUME
Turn to adjust the volume
level of all speakers at the
same time (page 25, 26,
27, 28).
F AUTO CAL MIC
jack
Connects to the supplied
optimizer microphone for
the Auto Calibration
function (page 22).
Name Function
G MUTING Press to mute the sound
(page 26).
H SOUND FIELD
+/–
Press to select a sound
field (page 37, 39, 41, 42).
I PRESET TUNING
+/–
Press to select a preset
station (page 45).
J INPUT
SELECTOR
Press to select the input
source to playback (page
26).
continued
6
GB
About the indicators on the display
L
CR
SL SR
SW
D.RANGE
RDS
ST MONO
MEMORY
S
DIGITAL
DTS
HDMI
PL
OPT
COAX
21 3 4 5 6 7
89q
;
q
a
q
s
q
d
q
f
SLEEP
LFE
Name Function
A LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B SLEEP Lights up when the sleep timer is
activated (page 49).
C Playback
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.) indicate
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D ;
DIGITAL Lights up when receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections.
E HDMI Lights up when a playback
component is connected to this
receiver using a HDMI jack
(page 17).
L
CR
SL SR
SW
Name Function
F Preset
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 44.
G D.RANGE Lights up when dynamic range
compression is activated (page
30).
H Tuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 42), etc.
I MEMORY Lights up when a memory
function, such as Preset Memory
(page 44), etc., is activated.
J COAX Lights up when the DVD input is
selected.
K OPT Lights up when the VIDEO 2 or
SAT input is selected.
L ;PL(II) ; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
; PLII” lights up when the
Pro Logic II Movie/Music
decoder is activated.
M DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections.
N SW Lights up when the audio signal
is output from the
SUBWOOFER jack.
7
GB
Getting Started
Rear panel
12 3
4
OPT IN
SAT
OPT IN
VIDEO 2/BD
COAX IN AUDIO IN
DVD
DVD IN VIDEO 2/BD IN OUT
ANTENNA
SA-CD/CD
AUDIO IN
TV
AUDIO IN
FRONT R SUR L CENTER SUBWOOFERSUR RFRONT L
VIDEO 1
DMPORT
DIGITAL
SPEAKERS
HDMI
AM
R
L
R
L
A ANTENNA section
FM
ANTENNA
jack
Connects to the FM
wire antenna
supplied with this
receiver (page 19).
AM
ANTENNA
terminals
Connects to the AM
loop antenna
supplied with this
receiver (page 19).
B DIGITAL INPUT/OUTPUT section
OPT IN jack Connects to a DVD
player, etc. The
COAX IN jack
provides a better
quality of loud sound
(page 15).
COAX IN
jack
HDMI IN/
OUT jack
Connects to a DVD
player or a Blu-ray
disc player. An
image and the sound
are output to a TV or
a projector (page 17).
DMPORT
jack
Connect to a
DIGITAL MEDIA
PORT adapter (page
47).
C SPEAKERS section
Connects to speakers
(page 13).
D AUDIO INPUT section
AUDIO IN
jack
Connects to a Super
Audio CD player,
CD player, etc. (page
14, 15).
White (L)
Red (R)
8
GB
You can operate the receiver with the supplied
remote. You can also use the remote to control
the Sony audio/video components that the
remote is assigned to operate (page 49).
RM-AAU017
Remote commander
123
46
78
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
TV
?/1
AV
?/1
VIDEO 1 VIDEO 2 VIDEO 3 DVD
2CH A.F.D.
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET +
TUNING –
TV
TUNING +
REPLAY ADVANCE
MENU
MOVIE MUSIC
MEMORY DVD MENU
FM MODE
CLEAR
TOOLSDISPLAY
MUTING
TV VOL
MASTER VOL
AUTO CAL
D.TUNING
D.SKIP
AMP MENU
SAT TV SA-CD/CD TUNER
?/1
-
F
Gg
f
.
HmM
Xx
<
<
>
5
>10/
qg
qj
qk
qh
qf
ql
w;
wa
qd
1
3
2
5
6
7
8
q;
qs
qa
4
9
Name Function
A TV ?/1
(on/standby)
Press TV ?/1 and TV (M) at
the same time to turn the TV on
or off.
AV ?/1
(on/standby)
Press to turn on or off the Sony
audio/video components that
the remote is assigned to
operate.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
B ?/1
(on/standby)
Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You
can change the button
assignment following the steps
in “Changing button
assignments” on page 49.
Button Assigned Sony
component
VIDEO 1 VCR (VTR mode 3)
VIDEO 2 VCR (VTR mode 2)
VIDEO 3 Not assigned
DVD DVD player
SAT Digital Satellite
Receiver
TV TV
SA-CD/CD Super Audio CD/
CD player
TUNER Built-in tuner
DMPORT DIGITAL MEDIA
PORT adapter
9
GB
Getting Started
Name Function
D MOVIE Press to select sound fields
(MOVIE).
MUSIC Press to select sound fields
(MUSIC).
A.F.D. Press to select A.F.D. mode.
2CH Press to select 2CH STEREO
mode.
E AMP MENU Press to display the menu of
the receiver. Then, use V, v,
B, b and (P) to perform
menu operations.
F AUTO CAL Press to activate the Auto
Calibration function (page
22).
G D.TUNING Press to enter direct tuning
mode.
D.SKIP Press to skip a disc when
using a multi-disc changer.
H DVD MENU Press to display the menu of
the DVD player on the TV
screen. Then, use V, v, B, b
and (P) to perform menu
operations.
FM MODE Press to select the FM
monaural or stereo reception.
I ENTER Press to enter the value after
selecting a channel, disc or
track using the numeric
buttons of the TV, VCR or
satellite tuner.
MEMORY Press to store a station.
J MUTING Press to activate the muting
function.
Press MUTING and TV (M)
at the same time to activate
the TV’s muting function.
K TV VOL
+
a)
/–
Press TV VOL +/– and TV
(M) at the same time to adjust
the TV volume level.
MASTER
VOL +
a)
/–
Press to adjust the volume
level of all speakers at the
same time.
Name Function
L TV CH +/– Press TV CH +/– and TV (M)
at the same time to select
preset TV channels.
PRESET +/ Press to select
preset stations.
preset channels of the VCR
or satellite tuner.
./>
b)
Press to skip a track of the CD
player, DVD player or Blu-
ray disc player.
REPLAY /
ADVANCE
Press to replay the previous
scene or fast forward the
current scene of the VCR,
DVD player or Blu-ray disc
player.
m/M
b)
Press to
– search tracks in the forward/
reverse direction of the
DVD player.
start fast forward/rewind of
the VCR, CD player or Blu-
ray disc player.
TUNING +/– Press to scan a station.
H
a)b)
Press to start playback of the
VCR, CD player, DVD player
or Blu-ray disc player.
X
b)
Press to pause playback or
recording of the VCR, CD
player, DVD player or Blu-
ray disc player. (Also starts
recording with components in
recording standby.)
x
b)
Press to stop playback of the
VCR, CD player, DVD player
or Blu-ray disc player.
M TV Press TV and the button you
want at the same time to
activate the buttons with
orange printing.
N MENU Press to display the menu of
the VCR, DVD player,
satellite tuner or Blu-ray disc
player on the TV screen.
Press MENU and TV (M) at
the same time to display the
TV’s menu. Then, use V, v,
B, b and (P) to perform
menu operations.
<
<
continued
10
GB
a)
The number 5, MASTER VOL +, TV VOL + and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
b)
This button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
The VIDEO 3 button on the remote is not available
for receiver operation.
Some functions explained in this section may not
work depending on the model.
The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Name Function
O RETURN/
EXIT O
Press to
– return to the previous menu.
exit the menu while the
menu or on-screen guide of
the VCR, DVD player,
satellite tuner or Blu-ray
disc player is displayed on
the TV screen.
Press RETURN/EXIT O
and TV (M) at the same time
to return to the previous menu
or exit the TV’s menu while
the menu is displayed on the
TV screen.
P
V/v/B/b
After pressing AMP MENU
(E), DVD MENU (H), or
MENU (N), press V, v, B or
b to select the settings. Then,
press to enter the selection
for DVD MENU or MENU.
Press also to enter the
selection of the receiver,
VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Q DISPLAY Press to select information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Press DISPLAY and TV (M)
at the same time to select TV
information displayed on the
TV screen.
R TOOLS Press to display options
applicable to the entire disc
(e.g. disc protection), recorder
(e.g. audio settings during
recording), or multiple items
on a list menu (e.g. erasing
multiple titles).
Press TOOLS and TV (M) at
the same time to display
options applicable to the TV.
,
Name Function
S >10/
x
Press to select
track numbers over 10 of the
VCR, satellite tuner or CD
player.
– channel numbers of the
Digital CATV terminal.
-/-- Press -/-- and TV (M) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
CLEAR Press to clear a mistake when
you press the incorrect
numeric button.
T Numeric
buttons
(number 5
a)
)
Press to
– preset/tune to preset
stations.
select track numbers of the
CD player, DVD player or
Blu-ray disc player. Press
0/10 to select track number
10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (M) at the same time to
select the TV channels.
U TV INPUT Press TV INPUT and TV (M)
at the same time to select the
input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
11
GB
Getting Started
1: Installing speakers
This receiver allows you to use a 5.1 channel
speaker system. To fully enjoy theater-like
multi channel surround sound requires five
speakers (two front speakers, a center speaker,
and two surround speakers) and a sub woofer
(5.1 channel).
AFront speaker (Left)
BFront speaker (Right)
CCenter speaker
DSurround speaker (Left)
ESurround speaker (Right)
FSub woofer
Tip
Since the sub woofer does not emit highly
directional signals, you can place it wherever you
want.
Before you install the speaker and sub woofer,
be sure to attach the supplied foot pads to
prevent vibration or movement as shown in the
illustration below.
Example of front speaker
For greater flexibility in positioning the
speakers, use the optional WS-FV11 or
WS-FV10D speaker stand (available only in
certain countries). Be sure to detach the screw
from the speaker and use it when you install
the speaker to the speaker stand. For details,
refer to operating instructions supplied with
the speaker stand.
Installing the speakers on a flat
surface
Installing the speakers on the
speaker stand
12
GB
You can install your speakers on the wall.
1 Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.
2 Fasten the screws to the wall.
The screws should protrude 5
to 7 mm.
3 Hang the speakers on the
screws.
Example of installing the speakers on
the wall
Notes
Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
Contact a screw shop or installer regarding the
wall material or screws to be used.
Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
Installing the speakers on the
wall
4 mm
more than 25 mm
Hook on the back of the speaker
4.5 mm
5 to 7 mm
4.5 mm
Hook on the back of the speaker
13
GB
Getting Started
2: Connecting speakers
AFront speaker (Left)
BFront speaker (Right)
CCenter speaker
DSurround speaker (Left)
ESurround speaker (Right)
FSub woofer
a)
Use the long speaker cords to connect the surround
speakers and the short speaker cords to connect the
front and center speakers.
Note
Do not connect/disconnect the speaker cords to/from
SPEAKERS terminals while the receiver is turned
on.
Note on speakers
To connect the speakers correctly, be sure to
check the type of speakers by referring to the
speaker label* at the rear panel or bottom of
the speakers.
* The center speaker and sub woofer do not have the
character on the speaker label. For details on the
speaker type, see page 3.
AUDIO IN
D
VD IN VIDEO 2/BD IN OUT
SA-CD/CD
AUDIO IN
TV
AUDIO IN
VIDEO 1
DMPORT
R
L
R
L
SUBWOOFER
SPEAKERS
FRONT R SUR L CENTERSUR RFRONT L
F
CDE
A
A Speaker cord (supplied)
a)
A
AA
B
A
A
Character on
speaker label
Speaker type
L Front left
R Front right
SL Surround left
SR Surround right
14
GB
3: Connecting the audio/
video components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to “Component to be connected” below
for the pages which describe how to connect
the audio/video components.
After hooking up all your components,
proceed to “4: Connecting the antennas” (page
19).
Component to be connected
The following illustration shows how to
connect audio components such as Super
Audio CD player or CD player.
How to hook up your
components
To connect See
Audio components
Super Audio CD player/
CD player
page 14
Video components
DVD player/DVD recorder
Blu-ray disc player
Satellite tuner/Set-top box
•VCR
•TV
page 15
Components with HDMI jack page 17
Connecting audio components
VIDEO 2/B
D
ANTENNA
AUDIO IN
TV
HDMI
AM
R
L
AUDIO IN
SA-CD/CD
R
L
OPT IN
SAT
OPT IN
VIDEO 2/BD
COAX IN
DVD
DIGITAL
DVD IN
Super Audio CD player/
CD player
Audio signal
A
A Audio cord (not supplied)
15
GB
Getting Started
The following illustration shows how to
connect video components such as DVD
player, DVD recorder, satellite tuner or VCR.
If you connect a DVD recorder
Be sure to change the factory setting of the
DVD input button on the remote so that you
can use the button to control your DVD
recorder. For details, see “Changing button
assignments” (page 49).
Connecting video components
AUDIO IN
DVD IN OUT
ANTENNA
SA-CD/CD
FRONT R SUR LSUR RFRONT L
DMPORT
SPEAKERS
HDMI
AM
OPT IN
SAT
OPT IN
VIDEO 2/BD
AUDIO IN
TV
R R
L
VIDEO 2/BD IN
COAX IN
DVD
DIGITAL
AUDIO IN
VIDEO 1
L
AB
Blu-ray disc player
A Optical digital cord (not supplied)
B Audio cord (not supplied)
C Coaxial digital cord (supplied)
DVD player/DVD recorder VCR
Satellite tuner/Set-top box TV
Audio signal Audio signal Audio signal
A
BC
Audio signal Audio signal
continued
16
GB
Notes
You cannot do recording on the DVD recorder or
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.
To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
As this receiver does not have analog audio input
jack for DVD, connect your DVD player to the
DIGITAL DVD COAX IN jack on the receiver.
To output sound from the front left/right speakers
only, press 2CH.
When connecting optical digital cords, insert the
plugs straight in until they click into place.
Do not bend or tie optical digital cords.
Tips
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
To output the sound of the TV from the speakers
connected to the receiver, be sure to:
– connect the audio output jacks of the TV to the
TV AUDIO IN jacks of the receiver.
– turn off or mute the TV’s volume.
17
GB
Getting Started
HDMI is the abbreviated name for High-
Definition Multimedia Interface. It is an
interface which transmits video and audio
signals in digital format.
Connecting components with
HDMI jacks
AUDIO IN
DVD IN VIDEO 2/BD IN OUT
ANTENNA
SA-CD/CD
AUDIO IN
TV
AUDIO IN
FRONT R SUR LSUR RFRONT L
VIDEO 1
DMPORT
SPEAKERS
AM
R
L
R
L
OPT IN
SAT
OPT IN
VIDEO 2/BD
COAX IN
DVD
HDMI
DIGITAL
DVD player Blu-ray disc player TV, projector, etc.
A Coaxial digital cord (supplied)
B HDMI cable (not supplied)
We recommend that you use a Sony HDMI cable.
C Optical digital cord (not supplied)
BBB
Audio signal Audio/video
signal
Audio signal Audio/video
signal
Audio/video signal
AC
continued
18
GB
Notes on HDMI connections
The sound is output from the TV speaker
only when a playback component and this
receiver, as well as this receiver and the TV
are connected via the HDMI jack. To output
the sound from the supplied speakers and to
take advantage of the multi channel surround
sound, be sure to
connect the digital audio jacks on the
playback component to the receiver.
turn off or mute the TV’s volume.
The receiver does not support HDMI
CONTROL function.
This receiver may not be able to transfer
video or audio signals with certain types of
components.
The multi/stereo area audio signals of a
Super Audio CD are not output.
Audio signals (sampling frequency, bit
length, etc.) transmitted from a HDMI jack
may be restricted by the connected
component. If the image is poor or no sound
is output from the component connected via
the HDMI cable, check the setup of the
connected component.
Be sure to turn on the receiver, when video
and audio signals of a playback component
are being output to a TV through HDMI
jacks of the receiver. Unless the power is on,
neither video nor audio signals will be
transmitted.
For details on HDMI setup of the connected
component, refer to operating instructions
supplied with the connected component.
Notes
When connecting optical digital cords, insert the
plugs straight in until they click into place.
Do not bend or tie optical digital cords.
• Be sure to change the factory setting of the VIDEO
2 input button on the remote so that you can use the
button to control your Blu-ray disc player. For
details, see “Changing button assignments” (page
49).
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
19
GB
Getting Started
4: Connecting the antennas
Connect the supplied AM loop antenna and
FM wire antenna.
Notes
To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as
horizontal as possible.
OPT IN
SAT
OPT IN
VIDEO 2/BD
COAX IN AUDIO IN
DVD
DVD IN VIDEO 2/BD IN OUT
SA-CD/CD
AUDIO IN
TV
AUDIO IN
FRONT R SUR LSUR RFRONT L
VIDEO 1
DMPORT
DIGITAL
SPEAKERS
HDMI
R
L
R
L
ANTENNA
AM
FM wire antenna (supplied)
AM loop antenna (supplied)
20
GB
5: Preparing the receiver
and the remote
Connect the AC power cord to a wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1 Press ?/1 to turn off the
receiver.
2 Hold down ?/1 for 5 seconds.
“INITIAL” appears on the display.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO and SYSTEM
menus.
The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
MASTER VOLUME is set to “VOL
MIN”.
• Input is set to “DVD”.
Connecting the AC power cord
AC power cord
To the wall outlet
Performing initial setup
operations
DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER
MASTER VOLUME
AUTO CAL MIC
INPUT SELECTOR
PRESET TUNING
SOUND FIELD MUTING
?/1
1,2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Sony HTP-78SS User manual

Category
Audio tuners
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI