HDV‐WTX1L‐en‐GB_V1.12/16
ArticulationSetupandOrientation
Thearticulationdirectionandorientationmaychangeiftheprobeistwistedandcoiledduring
useorwhenstored.Tore‐orienttheprobe:
1. Placetheextendedprobeonaflatsurface
2. Setthetension“F”knobtotheleftorreleasedposition.
3. Setthearticulationknobto
thecenterpositionwiththeRΔandΔL
labelsinthehorizontalposition.
4. Manuallyadjusttheprobeandcameratothezerodegreeposition.
5. Rotatethearticulationknobclockwisefora90°bend.
6. Ifnecessary,manuallyadjusttheprobesothatthecameralaysflaton
the
surfacewitha90°articulation
7. Rotatethearticulationknobcounter‐clockwiseandconfirmproper
orientation.
ChargingtheProbeBattery
Theprobebatterycanbechargedintwoways:
1. Chargetheprobewithitsownchargingcable.TheACchargerportandchargingstatusLED
arelocatedinthebottomaccesscompartment.Connectthechargertotheprobeand
observethecoloroftheLED:Redindicatescharging;Greenindicatesfullycharged.
2. Chargetheprobethroughthecamera.Connectthecameratotheprobeviatheextension
cable(bottomaccesscompartmentjack).Makesurethatthechargingcableisdisconnected
fromtheprobeandthenconnectachargingcabletothecamera.Nowwhilethecamerais
charging,the
probewillchargeatthesametime.
Note:Therechargeablebatteryisnotuserreplaceable.
Specifications
Resolution 640x480pixels
Length 1m(3.3’)
Outerdiameter(O.D.) 6mm(0.24”)
Battery 3.7VrechargeableLi‐Polymer
Focusdistance 6cmto∞(2.36”to∞)
Housing StainlessSteel
FieldofView 60°
NumberofLEDs 4
LampOutput 3500Luxat20mm(0.8”)
OperatingTemperature‐20to70°C(‐4to158°F)
StorageTemperature‐20to70°C(‐4to158°F)
Warranty Oneyear
Copyright©2013‐2016FLIRSystems,Inc.
Allrightsreservedincludingtherightofreproductioninwholeorinpartinanyform
ISO‐9001Certified
www.extech.com
RΔ ΔL