Commax CIP-700M/CIP-700MS Owner's manual

Brand: Commax

Model: CIP-700M/CIP-700MS

Category: Door intercom systems

Type: Owner's manual

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

CIP-700M/700MS

User Manual

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea

Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133

Web site : www.commax.com

Printed In Korea / 2014.02.104

PM0271AS0010

PB 1

Index

Warnings and caution ··································································· 2

1. Introduction ··········································································· 4

1.1. Product component ····························································· 4

1.2. Screen composition ···························································· 4

1.3. Wireless network connection ················································· 5

1.4. Sign up ············································································ 6

1.5. Using Smartphone ······························································ 7

2. Home screen ··········································································· 8

2.1. Screen composition ···························································· 8

2.2. Edit space background ······················································· 9

2.3. Place/Delete device icon on home screen ································ 9

2.4. IoT Device connection ························································10

2.5. Place/Delete apps on home screen ·········································10

3. Call ······················································································11

3.1. Entrance Call ···································································· 12

3.2. Call ················································································ 13

3.3. Call log ···········································································14

3.4. Receive a call via Smartphone ··············································· 14

4. Security ···············································································15

4.1. Emergency ······································································15

5. Control ·················································································16

5.1. Lighting control ·································································16

5.2. Checking multi-sensor ························································16

5.3. Magnetic sensor monitoring··················································17

5.4. Adding devices ·································································17

5.5. Edit device ······································································18

6. Scenario/schedule setting ·························································· 19

7. Convenient function ·································································23

7.1. Calculator ········································································ 23

8. Setting ··················································································24

8.1. Environment set up ····························································24

8.2. Password change ······························································24

8.3. Connect to COMMAX ··························································24

8.4. General setting ·································································25

8.5. Wireless network connection ················································25

8.6. Screen setting ··································································26

8.7. Language and key setting ····················································26

8.8. Date and time setting ·························································27

8.9. System information ····························································27

9. Specication ··········································································28

9.1. Installation ·······································································28

9.2. Wiring Diagram and Components ···········································28

10. Specication ········································································· 30

User‟s Guide

B-type equipment

This unit getting the EMC registration as a home unit can be used in not only residential place but

also every area.

11.

System Diagram ·····································································31

Cleaning & Use

Please don’t disassemble,

repair or rebuild this product

arbitrarily (please contact the

service center if a repair is

needed.

·It may cause an electric

shock or fire.

Please plug the power cable

firmly into the inner end

·It may cause a fire.

Please hold the plug tightly

when unplugging the power

cable (a part of the copper

wire may be disconnected if

the grabbing is only made on

the cord when pulling out the

cable).

·It may cause an electric

shock or fire

When connecting the power

cables after cutting the cable,

please install the product with

power off

·It may cause an electric

shock or fire

When installing the product,

please fix it firmly while using

the wall-mounting unit and

screws.

·It may cause an injury from

the falling object.

Please be careful when using

an AC circuit breaker since

there is a possibility of an

electric shock.

When cleaning the product,

please rub it with a soft and

dry cloth after plugging out

the power cable. (Please don’t

use any chemical products

such as wax, benzene, alcohol

or cleanser.)

Please don’t drop the product

on the ground and don’t apply

a shock .

·It may cause a failure.

Please use the designated

connection cable within the

maximum calling distance

designated for the product

·It may reduce the product

performance.

Please check the use voltage

and current for the DC-only

products and use the

appropriate rectifier.

·It may cause a fire.

Please avoid direct rays of the

sun or heating devices at a

time of installation.

·It may cause a fire.

Please don’t install the

product on an unstable place

or small support board.

·It may cause an injury if it

falls down while in use.

If an abnormal sound, burning

smell or smoke is coming out

of the product, please plug out

the power cable and contact a

service center.

·It may cause an electric

shock or fire.

Please don’t insert any

metallic or burnable materials

into the ventilation hole.

·It may cause an electric

shock or fire.

Please use only the designated

batteries for the products of

using DC power.

·It may cause an electric

shock or fire.

Cleaning & UsePower & Installation

Warning

Caution

Warnings and caution

Please follow the things described below in order to prevent any

danger or property damage.

Warning

Caution

Prohibition.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord

without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

It may cause a serious damage or

injury if violated.

It may cause a minor damage or

injury if violated.

Power & Installation

Warning

Please don’t use several

products at the same time on

one power socket.

·It may cause a fire due to an

abnormal overheating.

Please don’t bend the power

cable excessively or it may

cause an electric shock.

·fire when using a damaged

power cable.

Please don’t handle the power

cable with a wet hand.

·It may cause an electric

shock.

Please plug out the power

cable from the socket when

not using it for a long period

of time.

·It may shorten the product

lifespan or cause a fire.

Please don’t install the

product in the place where

there is much oil, smoke or

humidity.

·It may cause an electric

shock or fire.

Please don’t install the

product with the lightening

and thunder.

·It may cause an electric

shock or fire.

Please don’t use and connect

this product with other

products with different rated

voltage

·It may cause a disorder or

fire.

When installing the product

that generates heat, please

install the product away from

the wall (10cm) for the

ventilation.

·It may cause a fire due to

the increased internal

temperature.

Cleaning & Use

Please don’t disassemble,

repair or rebuild this product

arbitrarily (please contact the

service center if a repair is

needed.

·It may cause an electric

shock or fire.

Please plug the power cable

firmly into the inner end

·It may cause a fire.

Please hold the plug tightly

when unplugging the power

cable (a part of the copper

wire may be disconnected if

the grabbing is only made on

the cord when pulling out the

cable).

·It may cause an electric

shock or fire

When connecting the power

cables after cutting the cable,

please install the product with

power off

·It may cause an electric

shock or fire

When installing the product,

please fix it firmly while using

the wall-mounting unit and

screws.

·It may cause an injury from

the falling object.

Please be careful when using

an AC circuit breaker since

there is a possibility of an

electric shock.

When cleaning the product,

please rub it with a soft and

dry cloth after plugging out

the power cable. (Please don’t

use any chemical products

such as wax, benzene, alcohol

or cleanser.)

Please don’t drop the product

on the ground and don’t apply

a shock .

·It may cause a failure.

Please use the designated

connection cable within the

maximum calling distance

designated for the product

·It may reduce the product

performance.

Please check the use voltage

and current for the DC-only

products and use the

appropriate rectifier.

·It may cause a fire.

Please avoid direct rays of the

sun or heating devices at a

time of installation.

·It may cause a fire.

Please don’t install the

product on an unstable place

or small support board.

·It may cause an injury if it

falls down while in use.

If an abnormal sound, burning

smell or smoke is coming out

of the product, please plug out

the power cable and contact a

service center.

·It may cause an electric

shock or fire.

Please don’t insert any

metallic or burnable materials

into the ventilation hole.

·It may cause an electric

shock or fire.

Please use only the designated

batteries for the products of

using DC power.

·It may cause an electric

shock or fire.

Cleaning & UsePower & Installation

Warning

Caution

2. Warnings and caution

Please follow the things described below in order to prevent any

danger or property damage.

Warning

Caution

Prohibition.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord

without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

It may cause a serious damage or

injury if violated.

It may cause a minor damage or

injury if violated.

Power & Installation

Warning

Please don’t use several

products at the same time on

one power socket.

·It may cause a fire due to an

abnormal overheating.

Please don’t bend the power

cable excessively or it may

cause an electric shock.

·fire when using a damaged

power cable.

Please don’t handle the power

cable with a wet hand.

·It may cause an electric

shock.

Please plug out the power

cable from the socket when

not using it for a long period

of time.

·It may shorten the product

lifespan or cause a fire.

Please don’t install the

product in the place where

there is much oil, smoke or

humidity.

·It may cause an electric

shock or fire.

Please don’t install the

product with the lightening

and thunder.

·It may cause an electric

shock or fire.

Please don’t use and connect

this product with other

products with different rated

voltage

·It may cause a disorder or

fire.

When installing the product

that generates heat, please

install the product away from

the wall (10cm) for the

ventilation.

·It may cause a fire due to

the increased internal

temperature.

2 3

1) Operation and inspection

All the equipment which is completed the wiring should be appropriate for below each

statement.

2) State on standby

If the power is on, the model name and version will be displayed with LED turned on.

1) Contrast : contrast adjustment (adjust it appropriately with UP/DOWN button)

2) Brightness : brightness adjustment (adjust it appropriately with UP/DOWN button)

3) Color : color adjustment (adjust it appropriately with UP/DOWN button)

4) Reset : initialize every setting value.

5) Screen-Mode : set the proportion of screen. (FULL screen/ 4:3 screen)

6) Save& Exi : save the setting value and end the screen adjustment.

* Screen brightness/concentration/color are adjustable with MENU switch while video calling.

* After moving to the relevant item with the UP/DOWN button, it is adjustable by pressing

SELECT button.

Contrast

[CONTROL MENU]

Brightness

Color

Reset

Screen-Mode FULL / 4:3

Save & Exit

4. Operation and Reset

5. Screen adjustment function

1. Introduction

1.1. Product component

ྙ Touch Screen

ྚ Speaker

ྛ Emergency button

ྜ Guard button

ྜྷ Door open button

ྞ Call button

ྟ Home button

ྠ Microphone

ྡ Power switch

ྡྷ Connection terminal

1.2. Screen composition

The bottom button of home screen

Go to home screen Go back



CONTENTS CONTENTS CONTENTS

•

Receiver volume control : Control the voice level coming from the outside unit.

•

volume control : Control the call sound volume from the outside.

MICROPHONE

RECEIVER VOLUME CONTROL

CALL VOLUME CONTROL

MENU(MENU SWITCH)

SELECT(SELECT BUTTON)

UP BUTTON

DOWN BUTTON

POWER SWITCH

PROGRAM DOWNLOAD

MASTER CONNECTION

DC POWER_INPUT



3. Part name and function

SPEAKER

POWER AND DISPLAY LED

MONITORING BUTTON

GUARD CALL BUTTON

CALL BUTTON

PRIORITY CALL/MASTER CALL

DOOR OPEN&CLOSE/WIRELE SS PHONE CALL

4 5

1.3. Wireless network connection

Press the ‘Setting’ button for setting screen.

Wi-Fi On/Off

Setting → Wi-Fi

Click the check box to turn on or off Wi-Fi.

Wi-Fi Connection

Setting → Wi-Fi setting

You can search surrounding network and connect to selected wireless network.

Select the Wi-Fi from the network list of auto-discovered and enter the password to connect network if

necessary. If protected Wi-Fi with lock, the password need to be entered to use the Wi-Fi.

Add Wi-Fi directly

When the Wi-Fi you want is not discovered, you can add it entering the Wi-Fi information directly to the

list.

Select “Add Wi-Fi network” at the bottom of Wi-Fi list.

Enter SSID of network, select security type, enter the password and select EAP way. The different

information is shown according to the security type.

Disconnect Wi-Fi

Not to connect the previous Wi-Fi automatically, initialize registered network information. First, select

connected Wi-Fi and select Don’t save. Then, the Wi-Fi will be disconnected and the previous connect

information is initialized.

※

You need to set the Ethernet IP address and the Wi-Fi IP address differently.

1) Being Paged from an Extension

The Call lamp will blink and a Melody tone will sound when being paged from an

extension. Press the Call button to answer the page, as indicated by the steadily lit Call

lamp. When finished with the conversation, press the Call button again to end the call.

2) Being Paged from the Household Porch while Connected to an Extension

a) A soft Chime tone will sound while connected to an extension, and the image of the

visitor will be displayed.

b) Press the Call button while staying connected with the extension. (LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

3) Being Paged from the Common entrance while Connected to an Extension

a) A soft Chime tone will sound while connected to the extension, and the visitor's

image will be displayed on the screen.

b) Press the Call button while staying connected to the extension. (LED will blink)

c) Press the Call button once more.

d) The current extension call will end and a new call will start.

4) Incoming Call while Connected to an Extension

a) A soft Bell will sound while connected to the extension.

b) Press the Call button while staying connected to the extension. (LED will blink)

c) Press the Call button once more.

d) The current extension call will end and a new call will start.

※ Alarm function operates interlocked with other equipment while staying connected to

the extension.

1. Call with Master equipment: marked in only Master

2. Call with other Slave equipment: marked in the equipment which makes a call.

9. Ext. call function

3) Being Paged from the Common entrance while Connected to another Household

a) A soft Chime tone will sound while connected to another household, and the visitor will

be displayed on screen.

b) Press the Call button while staying connected to the other household. (LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

1.4. Sign up

1) Select ‘ Sign up’ button. 2) Enter ‘ID’ and select ‘Duplication check’ button.

3) Select y our country.

4) Enter ‘Password’ and ‘Retype Password’ and

select ‘Registration’ button.

5) Your sign up is completed.

Edit, Initialize

1) If your ID is registered, your information will be shown. To change the password, select ‘P/W Change’

button..

2) If you want to delete your ID, select ‘Initialization’ button.

※f To receive a call and control the device via Smartphone app, Sign up is necessary.

※f To sign up, the internet access is necessary.

※ When sound from the Household cannot be heard due to outside noise while talking

with the ntrance(individual, common), pressing the Priority Call button will block out the

excess noise and transmit the sound from the Household only to the entrance camera

or common entrance. Holding the Priority Call will transmit Household sound only to

camera. If you release the button, you can hear the sound from camera.

1) Being Paged by Other Households

The Call lamp will blink and a Melody tone will sound when being paged by another

household. Press the Call button to answer the page, as indicated by the steadily lit

Call lamp. When finished with the conversation, press the Call button again to end the

call.

2) Being Paged from the Individual entrance While in a Call with another Household

a) A soft Chime tone will sound while connected to another household, and the visitor

will be displayed on screen.

b) Press the Call button while staying connected to the other household.

(LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

6. Priority Call

7. Telephone function

( When the call is finished, please end it by pressing the call button)

8. Talk with other households

1) Receiving a call

This device (videophone) supports only incoming calls, not outgoing. When an

incoming call is detected, the Call lamp will blink and a bell will ring. Press the Call

button to answer the call, as indicated by the steadily lit Call lamp.

2) Being Paged by the individual entrance While in a Call

a) A soft Chime tone will sound and the visitor will be displayed on screen.

b) Press the call button while in a call. (LED will blink.)

c) If you press the Call button again, a call with the Entrance will start.

3) Being Paged by the Common Entrance While in a Call

a) A soft Chime tone will sound while in conversation and the visitor will be displayed

on screen.

b) While in conversation, press the Call button. (LED will blink)

c) If you press the Call button again, a call with the Common Entrance will start.

4) Being Paged by the Guardhouse (or by another Household) While in a Call.

a) A soft Chime tone will sound.

b) Press the Call button while in conversation. (LED will blink)

c) If you press the Call button again, a call with the Guard station(or other households)

will start.

6 7

1.5. Using Smartphone

Access Smartphone

1) Run 'IP Home IoT’app.

2) Enter 'ID' and 'Password' and press 'Login'

button.

3) Click 'Call' button to make a call.

4) When you click 'Refuse' button, the call is

disconnected.

5) When the call is connected, the entrance screen

is shown.

6) If you press 'Open Door' button, a warning

message will be displayed. If you click 'Cancel'

button, the popup window will close.

7) Enter the password registered in wall pad and

press 'OK' button to open the door.

※ By pressing the door release button, door can be released while talking with

entrance(individual/common)

※ While calling with common entrance the call will be ended automatically after door

release.

12. Common entrance call function

13. Door release function

4) Incoming Call while Connected to the Entrance

a) Soft Bell will sound while connected to the entrance.

b) Press the Call button while connected to the entrance. (The Call lamp will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

5) Monitoring the entrance

a) Press the monitoring button on stand-by mode (you can check the entrance)

b) End it by pressing the monitoring button once again.

While monitoring, make a call with entrance by pressing the call button.

When finished with the conversation, press the Call button to end the call.

1) Paging the Household Videophone from the Common entrance

a) Chime tone will sound, and the visitor will be displayed on screen.

(The screen will turn off 30 seconds after the page)

b) Press the Call button to answer.

(The call can be made for 1 minute from the moment of pressing the Call button)

c) Pressing the Open button while connected to the Common entrance will release it.

Press the Call button again to end.

2) Being Paged by the Household Porch while Connected to the Common entrance

a) Soft Chime will sound while connected to the Common entrance, and the Entrance

lamp will blink.

b) Press the Call button while connected to the Common entrance. (LED will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

3) Incoming Call while Connected to the Common entrance

a) Soft Bell will sound while connected to the Common entrance.

b) Press the Call button while connected to the Common entrance. (LED will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

2. Home screen

2.1. Screen composition

Entrance

Entrance monitoring, Visitor communication

Call log

To check Call log

Emergency

Home emergency button

APPs

All installed apps list

※f If you press and hold the home screen for about 1 second, you will get a menu that allows you to

perform "Edit space / Device layout / Add device / Widget layout / App layout".

1) Paging the Household Videophone from the Entrance

a) A Chime tone will sound, and the visitor will be displayed on screen.

(The screen will turn off 30 seconds after the page)

b) Press the Call button to answer.

(The call is limited to 1 minute from the moment of pressing the Call button)

When finished with the conversation, press the Call button to end the call.

2) Being Paged by the Guardhouse While Connected the Entrance

a) Soft Melody tone will sound while connected to the entrance.

b) Press the Call button while connected to the entrance. (LED will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

3) Being Paged by the Common entrance While Connected to the Entrance

a) Soft Chime tone will sound while connected to the entrance.

b) Press the Call button while connected to the entrance. (LED will blink)

c) Press the Call button again.

d) The current call will end, and a new call will start. (LED will turn on)

10. Guard station call function

11. Individual entrance call function

1) Being Paged by the Guardhouse

The Call lamp will blink and a Melody tone will sound when being paged by the

Guardhouse. Press the Call button to answer the page, as indicated by the steadily lit Call

lamp. When finished with the conversation, press the Call button to end the call.

2) Being Paged by the Household Porch while Connected to the Guardhouse

a) A soft Chime tone will sound while connected to the Guardhouse, and the visitor will be

displayed on screen.

b) Press the Call button while staying connected to the Guardhouse. (LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

3) Incoming Call while Connected to the Guardhouse

a) A soft Bell will sound while connected to the Guardhouse.

b) Press the Call button while staying connected to the Guardhouse. (LED will blink)

c) Press the Call button once more.

d) The current call will end and a new call will start.

4) Paging the Guardhouse

a) Press the Call button.( standby sound "toot” will be heard)

b) Press the Guard button. (Paging Time: 30 seconds)

c) When answered by the Guardhouse, register the household number and ext.

setting.

※ This guard station call function is used when you set the ext. number to this slave phone

when installing first. (using interlocked with Master and Guard station)

8 9

2.2. Edit space background

1) Press and hold the Home screen for about a second.

2) Click the 'Space Background' button.

3) Select the background picture to use.

4) Enter a space name.

5) Press 'OK' button to save the background. Press 'Close' button to cancel editing.

2.3. Place/Delete device icon on home screen

1) Press and hold the Home screen for about a second.

2) Click the ‘Place icon' button.

3) You can place the device icon on the home screen by pressing and holding.

On the home screen, press and hold the icon to delete will be deleted when moved to the trash.

17. How to use common entrance camera

1) To call the household

a) Press the household number ex) household 101 => 1,0,1

b) Household number appears on FND

c) Press the call button (E: shape of bell)

d) Conversation begins when household picks up the

phone.

2) Paging a guard station

a) Press the guard button(shape of police officer)

b) ‘Guard’ appears on FND.

c) Press the Call button(E: shape of bell)

d) ‘Guard’ blinks on FND with call sound.

e) Conversation begins when guard station pick up the

phone.

3) Opening the door with PIN

a) Press the household number.

b) Press the Key button(K: shape of key).

c) ‘PASS’ blinks on FND.

d) Press the household PIN.

e) ‘___’ appears on FND.

f) Press the Call button.

g) ‘OPEN’ message blinks on FND and door will open.

[Reference for use]

If you don’t recall household PIN, please contact a

guard station or management station.

Enter theHousehold Number.

Wait for a reply

Press the page button.

A paging tone will sound.

Press the

Call button (E).

ex) unit 101

ex) To open the door of unit 101

Press the Guard button.

Press the Page button.

A paging tone will sound.

Wait for a reply

Press the Call button (E).

Enter the Household Number.

Press the Electronic key button.

Enter the Household PIN.

Press the Page button.

Press the Call button (E).

2.4. IoT Device connection

1) Press and hold the Home screen for about a second.

2) Click the 'IoT Device connection' button.

3) Connect each device according to the device pairing method. (It can be up to 60 seconds.)

Press the 'Cancel' button to cancel the pairing connection.

5) When the device is registered, the device is automatically placed on the home screen.

2.5. Place/Delete apps on home screen

1) Press and hold the Home screen for about a second

2) Click the 'Apps' button.

3) Tap and hold the icon of the app you want to place on the home screen.

4) On the home screen, touch and hold the icon of the app you want to delete to move it to the trash, and the

app icon will be deleted.

※ When the Away Mode is set from the Household, pages by visitors from the Common

entrance or Household Porch are automatically forwarded to the Guardhouse to be

answered by the Guard on duty.

※ Away Mode cannot be set with this Videophone, but enabling the Away Mode through

another videophone will have all pages from the Common entrance and the Household

Porch to be forwarded to the Guardhouse.

※ In case that you press the door release button and front call button at the same time,

"toot toot toot~” sound will be heard and initialization will be applied.

☞

Caution : On execution of initialization

function, all the information such as household

setting and screen adjustment.

※ Initial value of initialization

a) Building and household number: Building 1234 household number 5678

b) Ext. ID : 0

c) Receiving delivery service status: no delivery service reception

d) Guard talk time : 3 min

14. Master and wireless call function

15. Detour function

16. Factory Initialization function

1) How to call master related to extension number (Setting master ext. : no.1)

a) On standby mode, enter the call standby mode by pressing the call button. (sound

"toot”)

b) Press the priority call button. (calling Master)

2) How to call wireless phone related to extension number

(Setting wireless phone ext. : no.5)

a) On standby mode, enter the call standby mode by pressing the call button.

(sound "toot”)

b) Press the priority call button. (calling Master)

☞

Caution : in case of door

release and priority call button, it operates as original

function unless the call standby mode.

10 11

3. Call

Call screen

£ Keypad

¤ Call Log

¥ Contacts

Extension conversation

§ Delete

¨ Call

§

¨



Call connection screen and call screen

£ Activation and waiting call display

¤ Setting the front door of our house

¥ Connection screen

¦ Call volume and volume control

§ Receive a Call

¨ Call rejection, cancellation

ª Store visitor video

« Store visitor photo

Ȅ Call reception screen differs depending on the type of door call, security call, etc.

£ ¤

¥



ª

£ ¤

¥

¦

§

¨

©

18. Guard Security Alarm Function

19. Connection diagram

* This Videophone sounds alarms when emergency situations are detected, but those alarms

cannot be canceled through this unit.

* Please use other Videophones (With Cancel/Reset Feature) to cancel emergency alarms.

* This function is impossible to generate the sound which can be heard when interlocked with

other video phones.

1) Emergency : Pressing the Emergency button when needed will sound the corresponding

alarm (Electronic Gun) from the unit.

2) Warning 1 : The corresponding alarm (Fire Truck) will sound when Warning 1 is detected.

3) Warning 2 : The corresponding alarm (Ambulance) will sound when Warning 2 is detected.

4) Security : The corresponding alarm (Police Siren) will sound when burglar is detected.

☞

Caution : in case of alarm, it will sound loudly regardless of volume switch.

3.1. Entrance Call

Monitoring of my house entrance

Monitor and call my house entrance

1) You can monitor the entrance of our house by pressing the door icon or by pressing the 'door' button on

the dial screen.

2) Press the "Cancel call" button to cancel monitoring.

3) If you want to talk during monitoring, press (call) button .

4) Press the "End call" button.

Open the door of my house

1) Press the 'Open Door' button during a call.

2) Open the door.

Open common entrance door

1) Press the 'Open Door' button during a call.

2) Open the door.

Saving the image of our house

1) Press the 'Record' button during a call or a call.

You will see a photo of the visitor on the home screen if it successfully saved.

4) Registering household PIN

a) Press the Key button(K: shape of key)

b) Press program number ‘20’

c) Press the Call button(E: shape of bell). ‘hono’ message

blinks on FND.

d) Press the household number.

e) Press the Call button(E: shape of bell). ‘PASS’ message

blinks on FND.

5) When you want to open the door with wireless card

key(optional), put the distributed wireless card key(RF Card) to

the window at the bottom of camera lense. Then, door will

open with the message of ‘OPEN’ on FND.

[Reference for use]

①

If unregistered card comes close to the sensor,

guard station unit has to be informed the

situation automatically with the call. Please

②

If nothing has been changed, the card cannot

be used.

Press the Program button (P).

Press the

Call button (E).

Electronic Key button (K).

Press the Program Number (20).

Enter the old PIN. ex)1234

Enter the new Household PIN.

ex)3690

Household Number. ex) 101

Press the

Call button (E).

Press the

Call button (E).

Please the Card Here

OPEN DOOR

12 13

Setting my home screen

1) Press the 'entrance' button on the phone screen.

2) Press the 'Screen Settings' button.

3) On the Screen Settings tab, press the button (Color), (chroma), (Brightness), or

(Contrast) you want to set and adjust the value with the (Left) and (Right) buttons.

Press 'Reset' button to change to initial screen .

The screen settings can be set only when monitoring the door.

[Setting my house entrance screen]

Receive a call at our house

1) Visitor screen are displayed on the wall pad with bell sound, when you receive a call.

2) Press the (Talk reject) button to reject the call.

Press

(Talk) button to connect the call and press the

the (End Call) button to end a call

3.2. Call

Call to extension

Monitoring of my house entrance

Call to extension

1) Please press the extension in the screen.

2) Please input the call number and press Ex) Ext n2 -> 2

3) If you hear the dial sounds, you can see the call screen.

Press the (End Call) button to end a call



කఁሽ໕ᆳ౅



໕ᆳෟછ໓෮ฅ

Condition Description Solution

- The power supply is not

on.

- All works are

stopped.missing or not.

1. The power supply cord is

missing or not.

2. The power supply

switch(down) is off or not.

1. Please connect the power

supply cord.

2. Please turn on the power

supply switch(down) pushing to

the right.

- A call operation is not

performed.(Door,

Interphone function)

- The product does not

produce the sound.(Call

volume, Talk volume)

1. The wiring between other units

is connected correctly in good

order or not.

2. The wiring is missing or not.

1. A sound volume lies in

minimum or not.

1. Please refer to connection

related page.

2. Please connect correctly to

the terminal.

Please adjust the sound

volume properly.

- The screen is dark.

- The screen is strange.

1. There is a strong

reflected light behind the

visitor or not.

2. The screen control is

adjusted correctly.

1. Please change the

angle of camera lens.

2. Adjust the screen.

* Please read the user manual carefully before reporting any problems with the

product.

* If the problem persists, please contact the Customer Service Center.

20. Installation and how to wiring

21. Check point

3.3. Call log

Call log

Call Type

Make a call

Call log screen

Use call logs

1) You can press the button from the call log and connect the call .

2) You can clear the call history by clicking the trash button at the top of the screen and pressing the 'OK'

button

3.4. Receive a call via Smartphone

Wall pad screen when Smartphone call is connected

The image of visitor displayed on screen with a ringing bell.

Press the "Call" button if you want to make a call and press the "Reject" button to reject.

Press 'Exit' to end the call..

The wall pad will be provided a message "the wireless device is calling” when you make a call connection

with your Smartphone"



කఁሽ໕ᆳ౅



໕ᆳෟછ໓෮ฅ

* How to wire

☞ When connecting the video cables to the household videophone, use the VD/IN, VD/OUT

method.

☞ Take caution when performing this polarity wiring. The videophone will not operate with

improper wiring.

☞ With distance over 10 meters between MASTER and the household videophone, use the

coaxial cable (3C2V) as the video cable.

☞ Device number (ID) of the SLAVE (Household Videophone) must be entered; if not, the unit

will not operate properly.

[Reference for use]

�

Videophone extension function

1. Enter the SLAVE number. SLAVE number is the

device number (ID) assigned to

each videophone when there are more than one videophones in a household

and cannot be overlapped.

2. Registered device number (ID) is identical to the number used in extension

paging and calling.

�

Registering SLAVE Number (ID)

1. How to use the Guard station unit

Remote Control Button while Connected to the Guardhouse

 Building Number  Building Number (*)  Unit Number  Extension button

 SLAVE Number  Call Button(#)

2. How to use the Master phone

Preparation for

entering the extension Number(Master)  Calling Guard station

Entering extension ID(entering Master)

14 15

4. Security

4.1. Emergency

Emergency

Emergency detection

An emergency situation occurs when the emergency button is pressed. Emergency situation is proceeded in three

steps (occurrence → stop → return).

Emergency situation occurs

1) You can make an emergency by pressing the emergency icon or by pressing the emergency button on

the front of the product. Emergency type is displayed at the top of the screen and a siren sound is

generated

Emergency stop

1) Press the 'Stop' button at the bottom of emergency alert screen.

Enter the password (initial password: 1234) when you see the password screen.

Password input

Emergency Return

1) The button at the bottom of the screen changes to 'Return' if the password is matched.

Press the 'Return' button at the bottom of the screen.

Emergency situation is stopped, when the emergency returns.

Spec

Model

CAV-71AS

MASTER 6 lines

14V , 700mA(MAX)

Hands free mode(Voice Switch circuit)

17.78 cm(7') COLOR TFT-LCD(digital)

- Entrance : two types of 3 tones electric chime bell

- Guard station : Melody

60±10 SEC(During conver sation), 30±10SEC(During monitoring)

MASTER : Ø 0.65 CABLE / 30m

0℃~+40℃

Transmission style

Power Source

Conversation

Display

Screen

Distance

Working Temperature

24. Specification

Call sound

5. Control

5.1. Lighting control

1) Go to the Lighting tab.

2) When you press power button of whole lightings, all lightings are turned on.

3) When you press power button of whole lightings, all lightings are turned off.

4) Press the power button of the lighting you want to control to turn the light on or off.

[Lighting control screen]

5.2. Checking multi-sensor

1) Go to the Indoor Environment tab.

2) Displays information collected in indoor environment by multi-sensor.

[Multi-sensor screen]

* As a common wiring type product, damage may result if the installed Household

videophone unit is removed and installed at a different location.

* Please turn the unit ON.

* When damage or malfunction of the unit has been detected, please contact the

Customer Service Center right away.

* An appropriate circuit breaker must be installed in the building's interior wiring.

* Do not place vase, water bottles, and etc on top of the unit.

* Please ensure that electrical power has been completed blocked from the unit when

installing or repairing the unit.

22. Instruction for use

▶ When more than one videophone is connected to the system and one of those

videophones are in use, the call cannot be made by another videophone within that

system.

▶ Also, incoming pages while a call is being made are only heard through the

videophone in which that call is being held from.

▶ When an emergency situation occurs, emergency alarm will be sounded by all

installed videophones, and the Cancel/Reset feature can only be performed through

videophones supporting that feature.

▶ This videophone is able to call the guard, wireless phone(ext. 5) and Master

phone(ext. 1) but in other places (common entrance, other households, local loop

and so on), only receiving is available.(Master interlocking function)

Monitor

T4 X 18

Wall bracket

Mounting Screw

M3 X 8

Monitor

Fixing Screw

Connector

(7P X 1EA)

Adapter

(DC 14V)

Bracket for wall mount Manual

23. Contents

POWER CORD

16 17



5.3. Magnetic sensor monitoring

1) Go to the Safety tab.

2) 'Detected' is displayed when door open is detected.

3) If no door open is detected, "No detected" is displayed.

[Magnetic sensor screen]

5.4. Adding devices

1) Press the + button to enter the Add Device mode.

2) Pairing mode is for 1 minute.

[Control screen] [Device addition screen]

Spec

Model

CAV-71AS

MASTER 6 lines

14V , 700mA(MAX)

Hands free mode(Voice Switch circuit)

17.78 cm(7') COLOR TFT-LCD(digital)

- Entrance : two types of 3 tones electric chime bell

- Guard station : Melody

60±10 SEC(During conver sation), 30±10SEC(During monitoring)

MASTER : Ø 0.65 CABLE / 30m

0℃~+40℃

Transmission style

Power Source

Conversation

Display

Screen

Distance

Working Temperature

24. Specification

Call sound



5.5. Edit device

Change the device nickname

1) Select the device and change the nickname.

2) Press ‘OK’ and then the name of device is changed.

[Device edit screen]

Remove device

1) Press the "Trash" button.

2) Select the device you want to delete.

3) Press the 'Finish' button to delete the device.

[Remov devie c sce reen]

* As a common wiring type product, damage may result if the installed Household

videophone unit is removed and installed at a different location.

* Please turn the unit ON.

* When damage or malfunction of the unit has been detected, please contact the

Customer Service Center right away.

* An appropriate circuit breaker must be installed in the building's interior wiring.

* Do not place vase, water bottles, and etc on top of the unit.

* Please ensure that electrical power has been completed blocked from the unit when

installing or repairing the unit.

22. Instruction for use

▶ When more than one videophone is connected to the system and one of those

videophones are in use, the call cannot be made by another videophone within that

system.

▶ Also, incoming pages while a call is being made are only heard through the

videophone in which that call is being held from.

▶ When an emergency situation occurs, emergency alarm will be sounded by all

installed videophones, and the Cancel/Reset feature can only be performed through

videophones supporting that feature.

▶ This videophone is able to call the guard, wireless phone(ext. 5) and Master

phone(ext. 1) but in other places (common entrance, other households, local loop

and so on), only receiving is available.(Master interlocking function)

Monitor

T4 X 18

Wall bracket

Mounting Screw

M3 X 8

Monitor

Fixing Screw

Connector

(7P X 1EA)

Adapter

(DC 14V)

Bracket for wall mount Manual

23. Contents

POWER CORD



6. Scenario/schedule setting

¤ ¥

[Scenario/schedule control screen]

£ Go to home screen

¤ Scenario addition

¥ Scenario view detail

6.1. Scenario addition

1) Press "Add Scene" button on "Add Scene Main Screen.

The device selection dialogue window will be displayed, if you click 'Create scene '.

3) Select the device to set and press the OK button on the upper right corner.

Select the device attribute and set the device.

Click the ‘Enter Name button’ at the top of the screen and then set the name and icon.

[Device attribute setting screen]

[Name and Icon setting screen]

£

Page is loading ...

Commax CIP-700M/CIP-700MS Owner's manual

Brand: Commax

Model: CIP-700M/CIP-700MS

Category: Door intercom systems

Type: Owner's manual

Download PDF

report

Commax CIP-700M/CIP-700MS Owner's manual

Commax CIP-700M/CIP-700MS Owner's manual

Related papers

Other documents