Akura APL1621-HDID Quick start guide

Brand: Akura

Model: APL1621-HDID

Type: Quick start guide

This manual is also suitable for

APL1519W-HDID

Akura APL1621-HDID

The Akura APL1621-HDID is a versatile and feature-packed TV that offers a wide range of entertainment options. With its built-in DVD player, you can enjoy your favorite movies and TV shows without the need for an external device. The TV also features a USB port, allowing you to connect a USB drive or other compatible device to play multimedia files.

In addition to its media playback capabilities, the Akura APL1621-HDID also offers a variety of other features that make it a great choice for any home. The TV's built-in Freeview tuner gives you access to a wide range of digital TV channels, while the HDMI port allows you to connect external devices such as Blu-ray players and gaming consoles.

Akura APL1621-HDID

GETTING STARTED

1. Please read the safety section (page 2) in the main instructions before proceeding further. This section

contains vital information to ensure safe positioning and use of the TV

2. Unpack the TV and place on a flat level surface suitable to support the weight of the TV (2.48 kg approx.).

3. Remove the plastic protective film on the front of the screen.

4. Connect the aerial into the TV Tuner connector at the left side of the TV (Fig 2).

Fig.2

Fig.3

5. Connect the mains power lead to the mains adaptor and insert the DC jack into

the DC-INPUT socket at the left side of the TV. Plug in and switch on at the

mains. The LED indicator on the TV will illuminate and show red (Fig 1).

6. Open the battery compartment cover (Fig 3) on the reverse of the remote

control. Insert 2 x AAA 1.5V alkaline batteries in accordance with the diagram in

the battery compartment. Take care to observe the correct polarity (+/-). Refit

the battery compartment cover

7. Press the POWER button (Fig 4) to turn the TV set on. The LED indicator will

turn green and after a few seconds, the screen will activate and the first time

installation menu (Fig. 5) will appear.

8. Use the cursor ▼/▲ buttons on the remote control to move up and down the

display to highlight desired options.

9. The default language is “English” if you want another language select that

language using the ►/◄ buttons and press Ok.

10. Select AUTOTUNING and press Ok. Fig 6 will be displayed, using the ▲/▼

buttons select to country of use (UK is default). Select START and press Ok, the

TV will now search the entire UHF range for both digital and Analog TV stations.

See Fig 7. When search is complete the TV will display the first channel (BBC1)

in DVBt mode.

Fig.4

Fig 1

Fig.6

Fig.7

WATCHING TV (basic operation)

11. To select a channel either enter the number of the channel using the number

buttons on the remote control or scroll through the channels using the channel

CH+/- buttons.

12. To view analogue TV channels press the SOURCE button to display the source

menu. Using the cursor ▲ / ▼ buttons highlight TV on the menu and press OK to

select. To view digital TV channels select DTV on this same menu.

13. To check the list of channels stored, press the CH.LIST button to display the

channel list and use the cursor ▲ / ▼ buttons to move up and down the display.

To select a channel, highlight the channel on the list and press OK to confirm.

14. Adjust the volume to the desired level using the volume or cursor ◄ / ►buttons.

The sound can be silenced by pressing the MUTE button on the remote control

and a mute symbol will appear on the screen. Press the MUTE button a second

time to restore the sound.

15. To switch off the TV for short periods, press the POWER button. The TV will go

into standby mode and the LED indicator will change to red. If not using the TV

for extended periods turn off at the mains switch to conserve electricity, all

settings will be retained.

Fig.5

For advanced operation of this TV please consult the Instruction Manual.

Should you have difficulty in operating this unit, please consult the Trouble Shooting Guide in

the Instruction Manual. If you suspect a fault, please contact the Customer Help Line, details

of which can be found in the Instruction Manual.

APL1519W – HDID

MSD106

Quick Start Guide

Flat Screen

Although the Flat screen is made with high precision technology and 99.9% or more of the

pixels are effective, dots may appear. These can be black or bright dots (red, green or blue)

and may appear constantly on the Flat screen. This is a structural property of the Flat panel

and is not a malfunction.

Base fitting and removal.

To fit the base plate.

Place the TV face up on

a suitable surface with

the base mounting facing

you (Fig 1).

Place the base plate as shown in Fig 2. Apply the base plate to the base

mounting slots and rotate Anti Clockwise until the base “clicks” and is

firmly fixed.

To remove the base. Place TV onto its back, carefully lift the clips

outward and rotate the base Clockwise. Fig 3

Akura APL1621-HDID Quick start guide

Brand: Akura

Model: APL1621-HDID

Type: Quick start guide

This manual is also suitable for

APL1519W-HDID

Akura APL1621-HDID

Download PDF

report

Akura APL1621-HDID Quick start guide

This manual is also suitable for

Akura APL1621-HDID Quick start guide

Related papers