AND AX-MX-43 User manual

Brand
AND
Model
AX-MX-43
Category
Measuring, testing & control
Type
User manual

AND AX-MX-43 Temperature Calibrator

The AND AX-MX-43 Temperature Calibrator is a versatile and easy-to-use device designed to calibrate the drying temperature of the MX-50 Moisture Analyzer. It features a digital thermometer with a 3 1/2 digit LCD display and a K-type thermocouple sensor pan. The calibrator allows you to select between Celsius and Fahrenheit units and offers two display resolution options: 0.1°C (0.1°F) or 1°C ( 1°F).

With its compact design and lightweight construction, the AND AX-MX-43 is portable and easy to carry. It is powered by a 9V battery, providing up to 200 hours of typical battery life. The calibrator comes with a protective carrying case for safe storage and transportation.

AND AX-MX-43 Temperature Calibrator

The AND AX-MX-43 Temperature Calibrator is a versatile and easy-to-use device designed to calibrate the drying temperature of the MX-50 Moisture Analyzer. It features a digital thermometer with a 3 1/2 digit LCD display and a K-type thermocouple sensor pan. The calibrator allows you to select between Celsius and Fahrenheit units and offers two display resolution options: 0.1°C (0.1°F) or 1°C ( 1°F).

With its compact design and lightweight construction, the AND AX-MX-43 is portable and easy to carry. It is powered by a 9V battery, providing up to 200 hours of typical battery life. The calibrator comes with a protective carrying case for safe storage and transportation.

MX-43 Instruction Manual
Temperature Calibrator for Moisture
Analyzer MX-50
1. Safety
SafetySafety
Safety Information
Information Information
Information
It recommends that you read the safety and operation
instructions before using the thermometer.
Repair: Do not disassemble the instrument to
avoid damage and fire.
Troubleshooting: Contact the local A&D dealer to repair the
instrument.
Description
Caution
A potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Caution for Battery Handling
• Do not charge it. Do not short terminals. Do not
disassemble it. Do not burn or through it into fire.
• Dispose it according to the regulations.
-1- WM:PD4000521
2. Introduction
IntroductionIntroduction
Introduction
The temperature calibrator consists of a digital thermometer
and a sensor pan with a K-type thermocouple in the center.
The instrument displays the temperature data used at the
calibration of the drying temperature.
Install the battery before use.
Refer to "5. Battery Replacement".
Refer to the "Calibration of Drying Temperature for MX-50"
for the temperature calibration method.
Caution
• Do not input a voltage that exceeds 24VAC or 60VDC,
to avoid getting an electric shock.
Sensor pan Digital thermometer
-2-
3. Specifications
SpecificationsSpecifications
Specifications
General(Thermometer)
Display: 3 1/2 digit LCD with maximum reading of 1999
Battery: 9V battery (NEDA 1604,IEC 6F22)
Battery Life: 200 hours typ. with carbon zinc battery
Ambient operation:
0°C ~ 50°C
(32°F ~ 122°F)
Ambient relative humidity:
0% ~ 80%RH, 0°C ~ 35°C
(32°F ~ 95°F)
0% ~ 70%RH, 35°C ~ 50°C
(95°F ~ 122°F)
Storage temperature:
-20°C ~ 60°C
(-4°F ~ 140°F)
Storage relative humidity: 0% ~ 80%RH
Dimensions: 147(H)×70(W)×39(D) mm
Mass: Approximately 210g (7.4oz.)
4. Operation and Functions
Operation and FunctionsOperation and Functions
Operation and Functions
4.1.
4.1.4.1.
4.1. Select a Unit
Select a UnitSelect a Unit
Select a Unit
Press the
°C key to use the unit of Celsius in the
temperature calibration of the moisture analyzer.
• The last unit is stored in the thermometer.
• Pressing the
°F key, a Fahrenheit value is displayed.
Note
• When the measurement value is out of range or the
sensor is not connected, "OL" is displayed.
• The OFFSET volume is sealed because it is calibrated.
4.2. Selecting the Display Resolution
Press the
1
° key to change the resolution in the
temperature calibration of the moisture analyzer.
• Pressing the
1° or 0.1° key, the display resolution can
be selected. Resolution: 0.1°C (0.1°F) or 1°C ( 1°F)
-3-
4.3.
4.3.4.3.
4.3. Hold Mode
Hold ModeHold Mode
Hold Mode
Do not use the hold function in the temperature
calibration of the moisture analyzer.
• Press the HOLD
key to hold the data. Then the “D-H”
indicator is displayed and the present reading value is
displayed and stops all further measurements.
• Press the HOLD key again to cancel the hold function.
Then the thermometer resumes measurement.
4.4.
4.4.4.4.
4.4. MAX mode
MAX modeMAX mode
MAX mode
Do not use the MAX function in the temperature
calibration of the moisture analyzer.
• Pressing the MAX
key, the maximum value is updated
and is displayed always. Pressing the MAX
key again,
the MAX function is canceled,
• Pressing the HOLD
key while the maximum value is
displayed, the value is not updated. Pressing the HOLD
key again, the value is updated.
5. Battery Replacement
Battery ReplacementBattery Replacement
Battery Replacement
Caution
Remove the sensor from the thermometer
before battery replacement, to avoid affecting
the circuit.
Procedure of Battery Replacement
When the battery needs replacement, is displayed.
Remove the three screws at the bottom case.
Remove the bottom case and replace the battery with a
new one.
Close the bottom case and replace the three screws.
- 4 -
  • Page 1 1

AND AX-MX-43 User manual

Brand
AND
Model
AX-MX-43
Category
Measuring, testing & control
Type
User manual

AND AX-MX-43 Temperature Calibrator

The AND AX-MX-43 Temperature Calibrator is a versatile and easy-to-use device designed to calibrate the drying temperature of the MX-50 Moisture Analyzer. It features a digital thermometer with a 3 1/2 digit LCD display and a K-type thermocouple sensor pan. The calibrator allows you to select between Celsius and Fahrenheit units and offers two display resolution options: 0.1°C (0.1°F) or 1°C ( 1°F).

With its compact design and lightweight construction, the AND AX-MX-43 is portable and easy to carry. It is powered by a 9V battery, providing up to 200 hours of typical battery life. The calibrator comes with a protective carrying case for safe storage and transportation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents