Infinity INTERLUDE IL10 Technical Manual

Infinity
Brand
Infinity
Model
INTERLUDE IL10
Type
Technical Manual

Infinity INTERLUDE IL10 offers great sound quality with an 89 nominal impedance and 150 watts maximum amplifier power. Its frequency response ranges from 56 Hz to 22,000Hz, ensuring a wide range of audible sound. The high sensitivity of 88dB (2.83V @ 1 meter) allows for efficient sound reproduction. The crossover frequency of 2800Hz and 24dB/octave ensures a smooth transition between the low-frequency and high-frequency transducers.

This speaker system is versatile and can be used in various settings.

Infinity INTERLUDE IL10 offers great sound quality with an 89 nominal impedance and 150 watts maximum amplifier power. Its frequency response ranges from 56 Hz to 22,000Hz, ensuring a wide range of audible sound. The high sensitivity of 88dB (2.83V @ 1 meter) allows for efficient sound reproduction. The crossover frequency of 2800Hz and 24dB/octave ensures a smooth transition between the low-frequency and high-frequency transducers.

This speaker system is versatile and can be used in various settings.

Technical Manual
Interlude IL10
Infinity Systems, Inc. 250 Crossways Park Dr., Woodbury, New York 11797 Rev1 04/03
YEL
YEL/BLK
GRN
GRN/BLK
+
-
NETWORK, IL10
335620-001
+IN
-IN
GRN
GRN/BLK
+
-
+
-
L1
2.0mH
C1
8.0 F
R1
1.50 ohm
C2
2.2 F 22.0 F
C3
L2
0.20mH
YEL
-
+
YEL/BLK
335225-003
+IN
-IN
L.F.
H.F.
335741-001
00121
IL10 SCHEMATIC
100V
10W 100V 100V
TRANSDUCER
HIGH FREQUENCY
TRANSDUCER
LOW FREQUENCY
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
l Nominal Impedance: 89
l Max Amp Power 150 watts*
l Frequency Response 56 Hz - 22,000Hz (E3dB)
l Sensitivity: 88dB (2.83V @ 1 meter)
l Crossover Frequency: 2800Hz; 24dB/octave
SYSTEM COMPONENTS:
l Cabinet IL10 (Not for Sale)
lGrille, (Platinum) 335770-001
l Low-Frequency Transducer: 6-1/2” (165mm) C.M.M.D.,
shielded (335741-001)
DC Resistance 4.5 ohms E 10%
l High-Frequency Transducer: 1” (25mm) C.M.M.D.,
shielded (335225-003)
DC Resistance 3.5 ohms E 10%
l Crossover Network 335620-001
AURAL SWEEP TEST SPECIFICATIONS:
l System Aural Sweep Test 6.0V Input 50 Hz to 22 kHz
l L.F. Aural Sweep Test 5.0V Input 50 Hz to 3 kHz
l H.F. Aural Sweep Test 2.83V Input 2 kHz to 22 kHz
PHYSICAL SPECIFICATIONS:
l Enclosure dimensions: 15-5/8” x 8-1/2” x 11-1/2”
(397mm x 216mm x 292mm)
l Weight 36 lbs (16.3 kg) Sold in Pairs
WARRANTY:
l Refer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will
ensure proper system headroom to allow for occasional peaks.
We do not recommend sustained operation at these maximum
power levels.
PACKING
WIRING DIAGRAM
INTERLUDE IL10
Technical Manual
Interlude IL10
Infinity Systems, Inc. 250 Crossways Park Dr., Woodbury, New York 11797 Rev1 04/03
EXPLODED VIEW
BUMP-ON (4)
330104-001
GRILLE CUP (6)
333249-003
TWEETER
335225-003
PEDESTAL-IL10
335618-001
WOOFER
335741-001
GRILLE, BLUE-IL10, 335770-002
GRILLE, RICH BURGUNDY-IL10, 335770-003
GRILLE, PLATINUM-IL10, 335770-001
PTB, 2"
336039-001
NETWORK
335620-001
(Rotated)
00120
CABINET IL10
(NOT FOR SALE)
SCREW, (6)
#6 X.75" PPH BLK
903401-012
907801-006
SCREW, (4)
#4-24 X .375" PPH BLK
SCREW,
#6 X.75" PPH BLK
903401-012
#6 X.75" PPH BLK
SCREW, (4)
903401-012
SHORTING STRAPS (2)
LEFT 073-110012-000
RIGHT 073-110013-000
335742-001
FRONT BAFFLE
TO SERVICE THE INTERLUDE IL10
1) Remove the grille.
2) Extract all (6) rubber grille retainers; this can be accomplished by
carefully pulling them out of their cavities with long-nosed pliers or similar tool.
3) Remove the (6) Phillips screws that are now exposed.
4) Carefully lift the front baffle, with tweeter attached, off the cabinet.
5) If necessary, remove the (6) Phillips screws holding the woofer to the cabinet.
#6 X.75" PPH BLK
903401-012
SCREW, (4)
INTERLUDE IL10
GRILLE, BLACK-IL10, 335770-004
  • Page 1 1
  • Page 2 2

Infinity INTERLUDE IL10 Technical Manual

Infinity
Brand
Infinity
Model
INTERLUDE IL10
Type
Technical Manual

Infinity INTERLUDE IL10 offers great sound quality with an 89 nominal impedance and 150 watts maximum amplifier power. Its frequency response ranges from 56 Hz to 22,000Hz, ensuring a wide range of audible sound. The high sensitivity of 88dB (2.83V @ 1 meter) allows for efficient sound reproduction. The crossover frequency of 2800Hz and 24dB/octave ensures a smooth transition between the low-frequency and high-frequency transducers.

This speaker system is versatile and can be used in various settings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents