Sanyo C25PG41 User manual

Sanyo
Brand
Sanyo
Model
C25PG41
Category
Cassette players
Type
User manual

This manual is also suitable for

INSTRUCTION MANUAL
Colour Television
C25PG41
C25ZG45
C29PK81
C29PK86 ~
~C29ZK81
I
I
=
C29ZK86
I
~
B
...........
...........
...........
...........
,.,.,.,.,.,
.....
:.:.~.~
...........
...........
...........
...........
...........
...........
...........
...........
,.,.,.,.,.,
,.,.,.,,,.,
...........
,.,.,.,.,.,
...........
.....
............
......
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
,.,.,.,.,.,
...........
...........
....
,,.....
:.,...:.:.:
...........
...........
..
:.:.:.:.:.:
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
.....
............
C29PK81186, C29ZK81186
STEREO
SURROUND
TELETEXT
C25PG41 , C25ZG45
VIDEO MULTI TERMINAL(PAuNTSC/NTSC4.43)
BLUE BACK.FUNCTION ON AV MODE
Model C25PG41, C29PK81, C29PK86 – Equipped with the West Germany Stereo Decoder.
Model C25ZG45, C29ZK81, C29ZK86 - Equipped with the West Germany Stereo Decoder and NICAM Digital Stereo
Decoder.
Model C25PG41 – Teletext Decoder is an optional extra (Optional Teletext Decoder Type No. TX - 250).
Model C29PK81, C29ZK81 – Not equipped with the Teletext Decoder.
Electric Mains................................................................................
Warnings and Cautions
................................................................
Remote Control Transmitter (for Model C25PG41, C25ZG45,
C29PK86, C29ZK86)
................................................................
Remote Control Transmitter (for Model C29PK81, C29ZK81) ....
Front Controls
...............................................................................
General Operation
Power ON/OFF, Programme Selection(Direct Selection) .......
Programme Selection(Programme UP and Down).................
Volume Control, Recall, Alternate
............................................
Bass Expander, Surround .................................i......................
Stereo and Bilingual Broadcast Receiving..............................
NICAM Stereo and NICAM Bilingual Broadcast Receiving....
Sound Mute..............................................................................
OFF Timer, Memory, Normalization ........................................
Picture and Sound Adjustments ..............................................
Tunirm of the Channels
2
3
4
5
6
7
8
8
9
9
10
10
11
12
Au~matic Tuning, Channel Copy
.............................................
13
Semi-Auto Tuning and Manual Tuning .....................................14
Teletext Operation
.........................................................................
15
Switching to the Teletext Mode, Page Selection ......................16
To Display the Index Page
........................................................
16
Sub Coded Page Access
.........................................................
17
Viewing TV While Searching for a Page
..................................
17
Hold, Double Letter Height....................................................... 18
Displaying Concealed Information, News Flash ......................18
Updated Page, Time .................................................................l9
FLOF (Full Level One Feature), Non FLOF Service ................20
Setting of the Private Position .......................................................2l
Maximum volume level setting and suppression of channel
tuning
.............................................................................................
22
Using the Remote Control VCR buttons
.......................................
23
Connecting other Equipment
Connecting to the AV1 Input Jacks ..........................................24
Connecting to the Front Panel AV2 Input Jacks ......................25
Connecting to the AV Output Jacks .........................................25
To record a TV broadcast while watching the playback from
a VCR
........................................................................................
26
AV Connection to the Aerial Socket.........................................27
Aerial Connection ..........................................................................28
Specifications
................................................................................
29
AC 220 – 240 Volts, 50Hz.
/
A
Warning
~m
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to quaiified service personnei.
A
Warning
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
~
Warning
Do not drop or push objects into the television cabinet
siots or openings.
Never spiii any kind of iiquid on the television receiver.
4
m
&
!!?
q
A
!
Caution
●
When the television receiver is not used for an extended period
of time, it is advisable to disconnect the AC power cord from
c1
.1 ,11
the AC outiet.
\-
.*-
J
..
,
...
9..
A
!
Caution
●
#
~.‘
‘,
‘. ;
Avoid exposing the television receiver to direct sunlight and
:.
:
other source of heat.
Do not stand the television receiver directiy on other products
which give off heat.
E.g. video cassette players, audio
amplifiers.
A
I
Caution
●
Do not biock the ventilation hoies in the back cover.
Adequate ventilation is essentiai to prevent failure of electrical
components.
—.
A
I
Caution
●
Do not squash power supply cord under the television receiver
- ‘Q”~
f
~ Programms
selector
~c~~
NORMALIZATION @—O
Programme UP/DWN ~—=
BASSEXPANDER@—
SURROUNDON/OFF~—.
d.,
Power ON/OFF
>
Teletext buttons
~ ALTERNATE
~ RECALL/ COLOUR SYSTEM
>
LEVEL
—~ SOUND MUTE
.—~ STEREO / BILINGUAL
~ OFF TIMER
[ Battery installation of the Remote Control Transmitter 1
❑Remove the battery cover by sliding.
❑ Install two “AA” 1.5 voltbatteries so that the “+” and “-” marks on the batteries match the
“+” and’-” marks inside the unit.
❑Close the battery cover.
Note: Replace the batteries when the lV set is showing the following symptoms:
Operation is unsteady or erratii, sometimes the TV set does not work with transmitter.
D
Discharged batteries may leak and damage the unit.
The normal life of batteries should be from nine to ten months.
@ lV/AV Selector _
~ Programme
Seieotor +
FUNCT’ON~
NORMAL’ZAT’ON@—0
ProgrammeUP/DOWN~—~
BASSEXPANDER@—
SURROUNDON/OFF@—0
w-a
B
.....................................................
.
#
.
.
,
PowerON/OFF
,.
@ ALTERNATE
. .
~ WCUL / COLOURSYSTEM
>
LEVEL
‘@ SOUNDMUTE
~—~ STEREO/ BILINGUAL
~ OFFTIMER
Model C25PG41
C25ZG45
v
Push to open
t
Q
f
P-hl-f!zgl
SYsl’a I
-A +
*
I
//b I
b
Mains ON/OFF
Switch
Headphone Jack
ii
FUNETION
@LEvEL
(For personaI listening, a headphone
can be connected to the headphone
MEMORY/PRESET
jack.)
COLOUR SYSTEM Selector
x
Programme UP/DOWN
Model C29PK81
C29PK86
C29ZK81
C29ZK86
Remote Control Detector
\
............
............
............
............
............
............
............
............
............
............
..........+.
............
............
Stand-by and Power lndicator—
............
............
,.,.,.,,,...
............
............
,.,.,.,.,.,,
............
,.,.,.,.,.,,
,.,.,.,.,.,,
,.,.,.,.,.,,
\
v’
~Mains ON/OFF
Push to open
Switch
● ☞
o
m
AV2 IN
VIDEO L - AUDIO - R
1
J
P.--M-@$&
@@@
SYSTSM I
-A +
VPA
(MONO)
,
( [lx~$~~~~(/ ($ ~
*prC)CJramme,p,DowN
VIDEO INPUT JACK (AV2)
Headphone Jack
COLOUR SYSTEM Selector
(For personal listening, a headphone can be
m
connected to the headphone jack.)
i
FUNCTION @LEVEL
MEMORY/PRESET
~
To switch on or off the ~
To set the TV to standby mode;
Press the Mains ON/OFF
button ~
The power of the TV is turned on,
or off completely.
k
Press the Power ON/OFF button ~
To turn on theTV, press again.
important i
Be sure to set the Mains ON/OFF switch ~ to the off position, if
the power failure occurs while viewing.
To turn on the TV from standby
mode;
Press ~
—
8
Power ON/OFF ~
(remote control transmitter)
Pv PA
or
Programme UP/DOWN o
(remote control transmitter)
1to 9,0
Key
/$?
(remote control
transmitter)
v
or
~PA
a
Pro ramme
UP/~OWN ~
(TV set)
AUTO SHUT OFF
This TV set incorporates the AUTO SHUTOFF function.
c
Remainingtime
Even if the TV is left on after you have gone to sleep, the TV set changes
to the standby mode within 10 minutes after all broadcasts have ended.
29
– 10
I PROGRAMME SELECTION )
(Direct Seiection)
To seiect a programme directiy
1t
3
Seiector
i
4
Digit
For example
*
To select a programme 8
f To select a programme 10
“-- * Press the Digit ~ key.
.6
A ’87810,,
To select a programme 27
8-??T?? ,7, ~
I
Programme Selection
~ (Programme Up and Down)
\
d
To seleot a channel
●
✼
r
T
Programms
UP/DOWN
P+&*
8YslEM I
-A +
vPA
/
or
OF
Remote Control Transmitter
ProgrammeUP/DOWN
I Volume Control
To adjustthesoundvolume
/
\ /
*
A SOUND
111111 ---------
I
RECALL
1
To display the on screen indications, press the RECALL/
COLOUR SYSTEM button.
FQ+(-pep~~
000
Pv
4
PA
o
A
o
I
ALTERNATE
I
~ RECALL/
COLOUR SYSTEM
[
Pro~ramme
poskion
\
2
-30
Screen display disappears after
about 5 seconds.
Press the ALTERNATE ~ key, and the programme position will
I
I I I
1
alternately select the prev[ous position and-the-present position.
I I I
I
4 2
I
I
I
I
I
--
4
~ ALTERNATE
For example, now you are watching programme position
“4” but you watched programme position “2” previously. If
you press the ALTERNATE key, programme position “2”
immediately appears.
~ BASS EXPANDER
i
To get a emphasis bass sound, press the BASS EXPANDER @ .
~
BASS
EXPANDER
.
—
I
SURROUND
I
ASOUND BASS
111111---------
WhentheSURROUNDON/OFF@ button is pressed with stereo broadcast receiving, youcan enjoythe
surround effect.
Whenthe SURROUND ON/OFF@ butionis pressed with monaural broadcast receiving, youcan enjoy the
stereo effect.
SURROUND
ONIOFF
I
SURROUND OFF
i Stereo and Bilingual Broadcast Receiving
I
Stereo
When receiving the stereo broadcast, “STEREO is
r
STEREO
displayed. You can select the stereo or monaural mode by
pressing the STEREO / BILINGUAL button @ and the
display changes as illustrated,
Bilingual
SURROUND ON
MONO
STEREO /
v
BILINGUAL
I
When receiving the bilingual broadcast, “A” is displayed.
A
You can select the main (A) or sub (B) language by
pressing the STEREO / BILINGUAL button @ and the
display changes as illustrated.
B
a
●
I
NICAM Stereo and NICAM Bilingual Broadcast Receiving ~
(Model C25ZG45, C29ZK81, C29ZK86 only)
NICAM Stereo
When receiving the NICAM stereo broadcast, ” NICAM” is
E
NICAM
displayed, You can select the stereo or monaural mode by
pressing the STEREO / BILINGUAL button @ and the
display changes as illustrated.
“El
MONO
(r-
.
STEREO /
BILINGUAL
NICAM Bilingual
When receiving the NICAM Bilingual broadcast, “A” is ~
displayed. You can select the main (A), sub (B) language
or Mono by pressing the STEREO/ BILINGUAL
button@.
Should you wish to mute the sound (e.g. While talking on
the telephone), press the SOUND MUTE @ key.
d’
A
B
.
0A8s SWmowovlm
00
@ SOUND MUTE
[“
To switch the sound back on,
press SOUND MUTE key again.
■ +@
& SOUNDMUTE
111111---------
1 OFF‘lMER ]
The TV set will be turned off after about 30, 60,90 or 120 minutes.
Press the OFF TIMER @ key.
T
I&o- e
1a???‘o-l
..............................
............
I
-00 +1-30+
I
I
k
After 60 minutes
+ OFF TIMER
+
~bC!!!!!!k!!2
No off timer
After 30 minutes
?
To cancel the OFF TIMER
Press the OFF TIMER key until” – 00” appears.
After 120 minutes After 90 minutes
Just one minute before switching off the TV, ” – 01”
and channel number will be displayed on the
screen.
G
~
This function lets you store the settings (for colour,
both picture and the sound, and these setting levels
remote control transmitter.
To store the picture and sound settings
(1) Set the picture and sound to the desired levels.
~ SOUND etc.
111111---------
brightness, contrast, tint, sharpness, sound volume)in memory for
can be retailed by pressing the NORMALIZATION @ key of the
(2) Press the MEMORY/PRESET 0 ~ button while the control function dispiay is stili visibie on the screen.
P-M-%
SYSTEM I
-A +
vPA
-+ L5E_l
MEMORY/PRESET
NOTE: The controi settings will not be saved if the MEMORY button is pressed after the control function dispiay has
ieft the screen.
——
~
~b?!d
Press the NORMALiZATiON @ key.
Q
The colour, brightness, contrast, tint, sharpness and
NORMALiZATiON
sound volume settings which you stored using the
MEMORY button are recaiied.
a
[
Picture and Sound Adjustments
(1) Seleotthe adjustmentitemusingthe FUNCTiON@ key.
(2)Adjust using the LEVEL @ + and – key.
●
~uuu
I
F~~o~pep~~
/
FUNCTiON
nnnn
or
P--M-&
SYSTEM I
.4+
vPA
or
P--M--
SYSTEM I
-A +
VPA
o
I
LEVEL
b
Each time the FUNCTiON key is pressed, function choice wili change as follows;
@ COLOUR
11111111111 ----
Coiourintensity
Dispiay off
r-
+
+
Q BRIGHT
11111111111----
Brightness
4
TREBLE
. . . . . . .
+---&---
+
r
@cONTRAST
11111111111----
Contrast
/+
(Operative for NTSC4.43
and NTSC signal only)
I
mSHARPNESS
11111111111 ----
4-
9: BASS
------- t-J-----
Sharpness
+
<>
BALANCE
TREBLE
BASS
(To equaiize the outputfromthe
leftand rightspeakers)
Fine tuning
(Operative for TV mode only)
There are three ways of tuning as follows;
Automatic Tuning (the basic way)
All receivable channels are automatically tuned in and memorized in consecutive programme position.
Semi-Auto Tuning
Use to preset a receivable channel in any desired programmeposition,e.g. the positionwiththe same number
as the channel.
Manual Tuning
Manuallytune a channel ifitcannot be automaticallytuned, such as when the signal is poor.
I
Automatic Tuning
I
(1) Press the MEMORY/PRESET button @.
Programme
Position
P—f+%
SYSTSM I
-A +
vPA
AUTO TUNING 2
L
111111111------
ESET ~hannel Ban{
*
(2)Press the LEVEL(+) @ button.
A
P++%
SYSTEM I
-A+
vPA
@ @@@ (3(s)
OF,
LEvEL(+)~ v
I
I
I I
I
The channels are preset in consecutive positions begining from
the programme position”1”.
After all available channels have been preset, the unit returns to
the position”1”.
Note: To cancel automatic tuning midway, press the MEMORY/
PRESET @ or Power ON/OFF ~ button.
r
1
Channel Copy
1
:
●
●
●
☞
●ee@*e
Example: To copy the TV channel in the programme position 2 Into the programme position 6
(1) Select programme position 2 using Programme selector @.+
2
I
(2) Press the MEMORY/PRESET button @ 3 times. —>
MANUAL
2
L
MIMI------~
MANUAL
(3) Select the programme position 6 using Programme UPIDOWN @ button of the TV set. ~
I_MMl------
()
6
(4)Press FUNCTION button O .
(5) Press the MEMORY/PRESET button @.
I
6
I
‘li+ir=
[
Semi-Auto Tuning & Manuai Tuning
Exampie: To preset a channei in programme position 6
I
Semi-Auto Tuning
I
I
Manuai Tuning
I
3
(1)Select programme position 6 using Programme selector ~.
~
L
E
J
{
-
3
(2) Press the MEMORY/PRESET button @twice.
(2) Press the MEMORY/PRESET button~ 3 times”
‘*!ZRESET ]:::---- ‘ I
1
f
(3) Press the LEVEL(+) or(–) @button.
I
I
(3) Press and hold the LEVEL(+) or(–) @ button
until the desired station appears.
u’ F:::@&
SYSTEMI
When a station is found,
searching stops automatically.
b.
LEVEL
‘t
+J
MANUAL
6
L 111111111111111---
J
L
u
w
3
P.—M-%
“ss fl:::o. .WA
>
F
w
.
(5) Press the MEMORY/PRESET button @ twice.
(5) Press the MEMORY/PRESET button @ .
u ;~
\
&
SYSTEM I
6
This completes the presetting.
h&’llEyY/
This completes the presetting.
km
Repeat steps 1 to 5 for other desired channeis.
REVEAL (GREEN) —
CANCEL (RED) —
TV/TEXT/MIX
SIZE
Page Selection ~
Page
UP(A)/DOWN(Y)=
\
,
.
,
.
.Tvl-a
(!).
‘v & “
A-
E
BASSSUtWtOUtIDvA.B
0000
l&oo6
16“6–?RO*!
.......................................................
.
.
YELLOW
TIME/SUB (CYAN)
INDEX
~ HOLD
— Digit
1
.
(1) To use CANCEL, REVEAL or TIME/SUB in Text>
mode, press the Digit button first.
I
To return to the normal text
display, press the Digit button
\
/
r
You can use CANCEL, REVEAL
or TIME/SUB when this display is
shown.
(2) Next, press the CANCEL, REVEAL or TIME/SUB
key.
J
Note: Model C25PG41 – Teletext Decoder is an optional extra (Optional Teletext Decoder Type No. TX - 250).
Model C29PK81, C29ZK81 – Not equipped with the Teletext Decoder.
G
—
.—
■ Switching to the Teietext mode
Press the TV/TEXT/MIX button, and the screen
changes as follows:
“
‘EI=E
lV/TEXT/MIX
EElo
■ Page Seiection
Direct Page Access
A Teletext page can be selected with the “O”to “9” buttons.
For example:
&+&&
To select page 120, press
UP- DOWN Page Access
Press the Page UP(A) button to step up to the next higher Teletext page.
Press the Page DOWN(Y) button to step down to the next lower Teletext Pa9e”
A+
PA
/?.3
A—
UP
■ To dispiay the index Page
To return to the index page, press the INDEX button
-1
PI 20
TEXT
PAGE
119121130200
I
■ Sub-Coded Page Access
When a Teletext information page exceeds more than one screen of information, it may take some time for the automatic
changing of the sub-pages to reach the sub-page you require.
It is possible to enter your required sub- page and continue watching the normal programme until the correct sub-page is
found.
(1) Select a text page which has sub pages.
(2) Press the Digit button.
‘ & I ‘W, ::PAGES****]’
(3) Press the TIME/SUB button.
M
f
u
*I2II *EZI
*@l
Oaaa
P
\
S****
To go back to normal Teletext page
SElo m
mm
ent~ mode, press the Digit button
TEXT PAGE
again.
L
0000
J
(4) Enter the desired sub- page.
~ Example:
To enter the sub
page “1O, you must
press the O,0, 1, and
Obutton.
~~~~ ~=1
\
(5)Press the CANCEL button.
\
~ mlqw=i?ii’li?~
CANCEL
Normal TV Picture
Normal TV Picture
(6) Press the TV/TEXT/MIX button to display the received sub- Pa9e.
H Viewing TV while searching for a page
Note:
To clear the sub-coded page, enter a new page number.
It is not possible to select another television station during a
sub - page access operation.
In some cases it can take some time to look for a page. In the interval you
CANCEL button.
can view the TV by pressing the Digit and
Digit
I
CANCEL ~ ~
Normal TV Picture
Normal TV Picture
A
When the page arrives,
the page number will
appear on the normal TV
picture.
7
P351
TEXT
PAGE
~
350352360 400
I
■ Updated Page
There are pages which are updated as events progress, such as sports results, news reports and traffic information.
If you have selected one of the above pages from the list of contents and you want to view television but still be kept
informed about the other events;
(TEXT mode)
Updated Page I —>
399301310:0 I @
P300
Updated Page
:x) (?) S****
(2) Press the CANCEL
(TEXT mode)
P300
Updated Page
399 101310400
button.
Id
>
\
Will .,;
*a - , “’”,,‘
P
Q
(Normal TV picture)
1
(4)Press the lVflEK/MIX
r
P300
button.
>
fy
+ ~aa + ““””””,,,,:
~
,,
(TEXT mode)
6
(Normal TV picture)
Note: It is not possible to select another TV station
■ TIME *@l
(3) As soon as this page is
updated, the page number
will appear on the normal
TV r,)icture.
during an UP - DATE. You
back to TV reception by
TEXT/MIX button.
should first switch
pressing the TV/
.
If the time is required while a programme is being viewed, press
the TIME/SUB *~ button.
Providing that the channel being viewed is also transmitting
teletext, the time will appear at the top righthand of the screen
I
for five seconds.
The digits displayed
represent
hours/minutes/seconds.
!
TIME/SUB
(Normal TV picture)
9 FLOF (FLOF: Full -level -one feature)
When a broadcasting station provides FLOF service, you can access the text pages you desire quickly and easily.
In the FLOF mode ,four Fastext topics are displayed at the bottom of the screen. These can be selected by pressing the
corresponding coloured button(Red, Green, Yellow, Cyan) on the remote control transmitter.
For example, when the Red button is pressed, the topic written in red is selected.
To get back to the initial index page, press the INDEX button.
(FLOF mode)
TEXT INDEX
NEWS
News Travel TV
Weather
e.g. To select the NEWS
News Sport City
Travel
/
I
I
/
\
page, press the RED key.
Red Green Yellow Cyan
*EEI *m
*E9
\
\
&
aaa
Red
Green
Yellow Cyan
Sam
000
RED key
■ Non FLOF Service
When the station does not have FLOF service, the INDEX page(Pl 00) is automatically displayed.
At the bottom of the screen, the four page numbers 199,101,110,200 are also displayed. Then, when you select i
random page number out of the displayed four pages by pressing a colour button, the text of that page is displayed.
Of course at any time you can select new pages by inputting new numbers.
(Non FLOF mode)
\Selected page)
u
PI 00
~ ‘6’
TEXT lNDEX
e.g. To select pagel 01,
TEXT (PagelOl)
press the GREEN key.
Zdd
......
. .....
(Selected page)~;-l-ol~– 1‘l.OO
!101!+1=102
/
......
Page 100 IS
,../
Omit
Page 102 is
displayed.
displayed.
10~~(Selected
1
page)
(Selected page)
,-......
;100:+10=110
..........
\
Page 110 is
Note:
displayed.
If your aerial signal is poor, the teletext reception maybe poor.
Omit
&
l~~j (Selecte-
1
page)
{700+1 00=2’
.........
Page 200 is
displayed.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Sanyo C25PG41 User manual

Sanyo
Brand
Sanyo
Model
C25PG41
Category
Cassette players
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents