Logik L37DIGB10 User manual

Brand: Logik

Model: L37DIGB10

Category: LCD TVs

Type: User manual

37” HD Ready 1080P

Digital LCD TV

Instruction Manual

L37DIGB10

Contents

Preparation .........................................................................................................................................................................................5

Unpacking the TV ...............................................................................................................................................................................................................5

Installing / Removing the Base Stand .........................................................................................................................................................................6

Front / Side View and Controls ......................................................................................................................................................................................7

Rear View and Sockets ......................................................................................................................................................................................................8

Installing Batteries in the Remote Control ................................................................................................................................................................9

Remote Control Operation Range ................................................................................................................................................................................9

Remote Control .................................................................................................................................................................................................................10

Connections ......................................................................................................................................................................................12

Making Video and Audio Connections .....................................................................................................................................................................12

Connecting an AV Device with HDMI Cable ...........................................................................................................................................................12

Connecting a Computer with VGA Cable ................................................................................................................................................................13

Connecting an AV Device with Component (YPbPr) Cable ..............................................................................................................................13

Connecting an AV Device with SCART Cable .........................................................................................................................................................14

Connecting an AV Device with S-Video Cable .......................................................................................................................................................14

Connecting an AV Device with Composite Cable .................................................................................................................................................15

Connecting a USB Storage Device ..............................................................................................................................................................................16

Connecting the Aerial .....................................................................................................................................................................................................16

Initial Setup ......................................................................................................................................................................................17

Turning the TV On for the First Time .........................................................................................................................................................................17

− Selecting the Input Source................................................................................................................................................................................18

− Channel Selection ................................................................................................................................................................................................18

− Favourite Channel Selection ............................................................................................................................................................................18

− Volume Adjustment .............................................................................................................................................................................................18

− Display Channel Information ...........................................................................................................................................................................19

Using the Features ...........................................................................................................................................................................20

Customising the Picture Setting ................................................................................................................................................................................ 20

− Picture Mode ......................................................................................................................................................................................................... 20

Customising the Sound Setting ..................................................................................................................................................................................21

Customising the Channel Setting ...............................................................................................................................................................................21

− Channel Manager .................................................................................................................................................................................................21

− Favourite Manager .............................................................................................................................................................................................. 22

− Auto Search ............................................................................................................................................................................................................ 23

− Manual Search (TV Mode) ................................................................................................................................................................................ 23

− Manual Search (DTV Mode).............................................................................................................................................................................. 24

Customising the Feature Setting ............................................................................................................................................................................... 25

− System Lock ........................................................................................................................................................................................................... 25

− Language ................................................................................................................................................................................................................ 27

− Timer Recording (DTV Mode) .......................................................................................................................................................................... 27

− Clock (DTV Mode) ................................................................................................................................................................................................ 29

− Hearing Impaired ................................................................................................................................................................................................. 29

− First Time Installation ......................................................................................................................................................................................... 29

− CI (Common Interface) (DTV Mode) ...............................................................................................................................................................31

− Time Shift Cong ................................................................................................................................................................................................. 32

Customising the Setup Setting ................................................................................................................................................................................... 32

− OSD Timer............................................................................................................................................................................................................... 32

− Sleep Timer ............................................................................................................................................................................................................ 33

− Aspect Ratio ........................................................................................................................................................................................................... 33

− Blue Screen ............................................................................................................................................................................................................ 35

− Reset to Default .................................................................................................................................................................................................... 35

− Firmware Upgrade .............................................................................................................................................................................................. 35

− PC Setup (PC Mode) ............................................................................................................................................................................................ 36

− YPBPR Setup (YPBPR Mode) ............................................................................................................................................................................. 37

− HDMI Setup (HDMI Mode) ................................................................................................................................................................................ 37

Teletext (TV Mode) .......................................................................................................................................................................................................... 38

− To Turn on Teletext Function........................................................................................................................................................................... 38

Digital Teletext (DTV Mode) ......................................................................................................................................................................................... 39

− Teletext within Digital Service ........................................................................................................................................................................ 39

EPG (Elecronic Programme Guide) .................................................................................................................................................40

EPG (Electronic Programme Guide) (DTV Mode) ................................................................................................................................................. 40

− Switch On/O EPG ............................................................................................................................................................................................... 40

− To Select a Programme...................................................................................................................................................................................... 40

− To Record the Current Viewing Programme ..............................................................................................................................................41

− To Set a Timer Recording ...................................................................................................................................................................................41

− To Set a Reminder for DTV Programmes......................................................................................................................................................41

− To Set a Reminder for Digital Radio Programmes ....................................................................................................................................41

PVR (Personal Video Recorder) and Time Shift .............................................................................................................................42

Personal Video Recorder PVR (Media Mode) ......................................................................................................................................................... 42

Time Shift Function .........................................................................................................................................................................................................44

− Using the Remote Control ................................................................................................................................................................................ 44

Maintenance .....................................................................................................................................................................................45

Hints and Tips ...................................................................................................................................................................................45

Display Modes ..................................................................................................................................................................................47

YPbPr Mode ....................................................................................................................................................................................................................... 47

PC Mode .............................................................................................................................................................................................................................. 47

HDMI Mode ....................................................................................................................................................................................................................... 47

Specification .....................................................................................................................................................................................48

Safety Warnings ...............................................................................................................................................................................49

Preparation

TV with TV Base

TV Base’s part number:

GBIP8.087.3164RS/RH

Remote Control x 1

part number: GBIP5.018.3086RS/RH

AAA Batteries x 2

part number: QT600RS/RH

TV Base

part number:

GBIP8.087.3164RS/RH

Cover Board

part number:

GBIP8.078.3237RS/RH

Screws x 7

part number:

GB6560M4X14B-RS/RH

Instruction Manual

part number: GBIP2.025.3497SSRS/RH

Unpacking the TV

Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Quick Start Guide

part number: GBIP8.812.3193RS/RH

Digital TV Switchover Addendum

part number: GBIP8.812.3141RS/RH

VOL

MUTE

STANDBY

ASPECT

AUTO

DISPLAY

AUDIO

TIXEUNEM

SOURCE

P.MODE S.MODE SLEEP

FAV

FAV-

FAV+

EPG

TEXT

SUBTITLE

TV/RADIO

HOLD

INDEX

MEDIA

SIZE

REVEAL

SUBPAGE

-/--

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.

Thank you for purchasing your new Logik TV.

Your new TV has many features and incorporates the latest technology to enhance your viewing

experience. We recommend that you spend some time reading this instruction manual in order that you

fully understand these features. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Preparation

1. Disconnect all cables connected to the TV.

2. Lay the TV down on a flat surface with the back side

facing up. Please make sure to place a soft cushioned

material (such as a pillow or thick piece of foam)

beneath the screen.

3. To remove the base stand, untighten the 7 screws that

hold the base stand to the rear of the TV.

• Remove the base stand before mounting the TV onto the wall.

• The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be

sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with

it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.

Keep all the spare screws should you want

to use the base stand option.

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.

Installing / Removing the Base Stand

6. To re-install the base stand, untighten the 2 screws

that hold the cover board. Take off the cover board

and reattach the base stand with the 5 screws.

4. Attach the cover board by using the 2 screws

(P.N.: GB6560M4X14B-RS/RH) from the base stand.

5. Mounting on the wall. This TV is designed to be

wall-mounted with a standard 400 mm x 200

mm mounting kit designed for flat-panel TVs

(sold separately). Mount this TV according to the

instructions included in the mounting kit. Due to the

space restriction, we recommend you to make all

connections (refer to page 13-17 for details) before

final mounting on the wall.

400 mm

200 mm

Four mounting holes

(size M5 screw)

Screws x 7

(P.N.: GB6560M4X14B-RS/RH)

Screws x 7

(P.N.: GB6560M4X14B-RS/RH)

DVR USB HDMI1

HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

DVR USB HDMI1

HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

Preparation

Front / Side View and Controls

Item Description

1 POWER LED

Illuminates green when the TV is turned on. Illuminates red when the TV is in standby

mode. If the LED flashed green continuously, this indicates the timer recording has

started.

2 IR (Infrared Receiver)

Receives IR signals from the remote control.

Do not put anything near the sensor, as its function may be affected.

Switch the TV on from standby.

Switch the TV back to standby.

4 SOURCE

Select among the different input signal sources:

TV / DTV / Media / AV / S-Video / PC / YPBPR / SCART 1/ SCART 2 / HDMI 1 / HDMI 2

5 MENU Displays the OSD (on screen display) menu.

6 CH +/-

Select a channel.

Select sub-menu of OSD menu.

7 VOL +/-

Adjust the volume.

Select and adjust setting in OSD menus.

13 2

Preparation

Rear View and Sockets

Item Description

1 AC ~ Connect the mains cable to the mains socket.

2 POWER ON/OFF

Switch on the POWER ON/OFF switch to turn the TV to standby mode.

3 DVR USB port

Allows the insertion of a USB storage device. You can view the recorded DTV programmes

through this port. (Media Mode)

4 HDMI 1 /2

HDMI (High-Definition Multimedia Interface) provides an uncompressed, all digital audio/

video interface between this TV and any HDMI-device, such as a set-top box, Blu-ray

player, and AV receiver.

5 VGA / PC AUDIO Connect to a computer or other devices with a VGA interface.

6 S-VIDEO

Connect to a VCR, DVD Player, or other AV devices with S-Video output sockets.

7 Y, PB, PR, L, R

Connect to a DVD player, Digital Set-Top-Box, or other AV devices with component

(YPbPr) video and audio output sockets.

8 VIDEO / AUDIO (L/R)

Connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video

devices.

9 CI (Common Interface) Slot Allows the insertion of a Common Access Module. (Refer to page 32 for details.)

10 SCART 1 / 2 Connect to a VCR, DVD Player, or other AV devices with SCART output socket.

11 RF IN (75 Ω) Connect to the aerial socket on the wall with the RF coaxial cable.

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

1086

2 3 4 75 9 11

Preparation

Remote Control Operation Range

Point the remote control at the TV no more than 5 metres from the

remote control sensor on the TV and within 60° in front of the TV.

The operating distance may vary depending on the brightness of the

room.

Installing Batteries in the Remote Control

1. Press and lift the back cover up to open the battery compartment of the

remote control.

2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends

of the batteries with the (+) and ( - ) ends indicated in the battery

compartment.

3. Close the battery compartment cover.

VOL

MUTE

STANDBY

ASPECT

AUTO

DISPLAY

AUDIO

TIXEUNEM

SOURCE

P.MODE S.MODE SLEEP

FAV

FAV-

FAV+

EPG

TEXT

SUBTITLE

TV/RADIO

HOLD

INDEX

MEDIA

SIZE

REVEAL

SUBPAGE

-/--

30° 30°

Handling the Batteries

• Improper or incorrect use of batteries may cause

corrosion or battery leakage, which could cause

fire, personal injury or damage to property.

• Only use the battery type indicated in this

manual.

• When the batteries are exhausted, the remote will

not function. Replace both batteries at the same

time with new ones.

• Do not install new batteries with used ones and

do not mix different types of batteries.

• Do not dispose of used batteries as domestic

waste. Dispose of them in accordance with local

regulations.

Handling the Remote Control

• Take care of your fingernails when you press and

hold the battery release tab.

• Do not drop or cause impact to the remote

control.

• Do not spill water or any liquid on the remote

control.

• Do not place the remote control on a wet object.

• Do not place the remote control under direct

sunlight or near sources of excessive heat.

• Remove the battery from the remote control

when not in use for a long period of time, as it

could cause corrosion or battery leakage and may

result in physical injury and/or property damage

including fire

Preparation

1 STANDBY

Switch the TV between on and standby mode.

2 AUTO

Press to auto adjust the screen position. (PC mode)

MUTE

Mute and restore your TV sound.

4 0-9 Number Button

Select a programme.

Select numbered items in a menu.

Select and switch to a channel that is higher than

Channel 9. (TV mode)

Return to previous viewing channel.

7 VOL. +/-

Adjust the volume.

8 ASPECT

Select from the following modes settings: Auto / Full / 4:3 /

16:9 / 14:9 / Zoom1 / Zoom2.

9 AUDIO

Change the audio language or audio channel. (TV / DTV

mode)

10 CH. +/-

Select a channel.

11 DISPLAY

Display the present screen information such as the current

channel and the input source.

Allows you to navigate the OSD menus and adjust the

system settings to your preference.

Confirm the selection in the OSD menus.

Display a list of channels saved in the TV tuner memory.

(DTV mode)

13 MENU

Display the OSD (On Screen Display) menu.

14 EXIT

Exit the OSD (On Screen Display) menu.

15 SOURCE

Select among the different input signal sources:

TV / DTV / Media / AV / S-Video / PC / YPBPR / SCART 1 /

SCART 2 / HDMI 1 / HDMI 2

16 P.MODE

Selects picture mode: Standard / Personal / Movie / Sport /

Mild / Game.

17 S.MODE

Selects sound mode: Standard / Personal / Voice / Music /

Theatre.

18 SLEEP

Set the TV sleep timer: 15 / 30 / 45 / 60 / 75 / 90 / 105 / 120

min / OFF.

Remote Control

VOL

MUTE

STANDBY

ASPECT

AUTO

DISPLAY

AUDIO

TIXEUNEM

SOURCE

P.MODE S.MODE SLEEP

FAV

FAV-

FAV+

EPG

TEXT

SUBTITLE

TV/RADIO

HOLD

INDEX

MEDIA

SIZE

REVEAL

SUBPAGE

-/--

Preparation

19 FAV

Display the Favourite Channel List.

FAV +/-

Switch between your favourite channels.

20 EPG

Display the EPG (Electronic Programme Guide). (DTV

mode)

21 TEXT

Turn on and off the Teletext function. (TV / DTV mode)

22 HOLD

Freeze a multi-page passage on screen in Teletext. (TV

mode)

23 TV/RADIO

A short-cut to switch input source to TV / digital radio

channels.

24 SUBTITLE

Display the subtitle which is broadcast with the

programme. (DTV mode)

25 INDEX

Press to select the Index page from teletext. (TV mode)

26 SIZE

To enlarge the picture on the TV in teletext. (TV mode)

27 REVEAL

Reveal hidden information such as the answer to a quiz

in Teletext. (TV mode)

28 SUBPAGE

Display the subpage on the teletext screen. (TV mode)

29 MEDIA

A short-cut to enter to Media mode to view the

recorded DTV programmes. (Media mode)

To initiate time shift function (DTV mode)

To start playback or pause. (Media mode)

Use to advance or reverse playback rapidly. (Media /

Time Shift function in DTV mode)

Press to start DTV programme recording. (DTV mode)

Press to stop playback. (Media mode)

Press to stop DTV programme recording (DTV mode)

Press to exit the PVR Time Shift progress bar and return

to the current live broadcast. (DTV mode)

Press to skip to the beginning of the previous chapter or

track. (Media mode)

Press to return to the starting point of the Time Shift

progress bar. (DTV mode)

Press to skip to the beginning of the next chapter or

track. (Media mode)

Press to return to the current live broadcast. (DTV mode)

35 Coloured buttons

Access the TELETEXT items or programme edit when

using Digital / Freeview TV Channels. (TV / DTV mode)

VOL

MUTE

STANDBY

ASPECT

AUTO

DISPLAY

AUDIO

TIXEUNEM

SOURCE

P.MODE S.MODE SLEEP

FAV

FAV-

FAV+

EPG

TEXT

SUBTITLE

TV/RADIO

HOLD

INDEX

MEDIA

SIZE

REVEAL

SUBPAGE

-/--

Connections

Making Video and Audio Connections

Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and

connection procedures.

When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are

complete.

Best Video

Performance

Signal Type

Separate audio

connection required

HDMI

(480i/480p/576i/576p/720p/1080i/1080p*)

VGA

Yes

Component Video

(480i/480p/576i/576p/720p/1080i/1080p*)

Yes

SCART (RGB Input) No

S-Video

Yes

Composite Video

*1080p: Although this TV is compatible with a 1080p input, the screen is not capable of

displaying this resolution and consequently the image will be scaled to suit the screen.

Connecting an AV Device with HDMI Cable

• This TV can accept High-Definition Multimedia Interface (HDMI) supports HDCP (High-Bandwidth Digital Content Protection)

Protocol.

• When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to

the HDMI function and the TV will automatically detect the resolution used by the HDMI source.

• To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x

1080p.

1. Use a HDMI cable to connect the TV’s HDMI input

socket to an external AV device’s HDMI output socket.

2. Plug the connected devices into the mains socket

before switching on the POWER ON/OFF switch at

the back of the TV.

3. Press the

button at the front of the TV or on the

remote control to turn on your TV.

4. Press the SOURCE button to display the Source List.

Use the

buttons to select HDMI 1 or HDMI 2 and

then press the OK button to confirm.

Rear View of TV

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

HDMI Cable

(not included)

Blu-ray Player / DVD Player /

Recorder

Set-top BoxGame Console

Although this TV is able to connect to HDMI

device, it is possible that some devices may

not operate correctly.

Connections

Connecting an AV Device with Component (YPbPr) Cable

1. Use a component cable to connect the TV’s YPbPr

input sockets to an external AV device’s component

output sockets.

2. Use an AV cable to connect the TV’s AUDIO(L/R) input

sockets to the external AV device’s audio output

sockets. (Audio Left = white, and Audio Right = red)

Component port on the TV Y Pb Pr

Video output ports on DVD

player

Y Pb Pr

Y Cb Cr

3. Plug the connected devices into the mains socket

before switching on the POWER ON/OFF switch at

the back of the TV.

4. Press the

button at the front of the TV or on the

remote control to turn on your TV.

5. Press the SOURCE button to display the Source List.

Use the

buttons to select YPBPR and then press

the OK button to confirm.

Connecting a Computer with VGA Cable

1. Use a VGA cable to connect the TV’s VGA input

socket to a computer’s VGA output socket. Use an

audio cable to connect the TV’s PC AUDIO input

socket to the computer’s audio output socket.

2. Plug the connected devices into the mains socket

before switching on the POWER ON/OFF switch at

the back of the TV.

3. Press the

button at the front of the TV or on the

remote control to turn on your TV.

4. Press the SOURCE button to display the Source List.

Use the

buttons to select PC and then press the

OK button to confirm.

VGA Cable

(not included)

Audio Cable

(not included)

Rear View of TV

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

Computer

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

AV Cable

(not included)

Rear View of TV

Component Cable

(not included)

COMPONENT

OUT

Pb/Cb

Pr/Cr

Satellite Receiver

Video Camera

Blu-ray Player / DVD Player /

Recorder

Set-top Box

Game Console

Yellow (Video)

Red (R)

White (L)

Yellow (Video)

Red (R)

White (L)

• The best resolution is 1024 * 768.

• If your computer is set to shut down after a

few minutes of idle mode, the TV will also

switch to standby due to no signal being

received, this is to save energy. Press the

button at the front of the TV or on the

remote control to restart the TV.

Connections

Connecting an AV Device with SCART Cable

1. Use a SCART cable to connect the TV’s SCART input

socket to an external AV device’s SCART output

socket.

2. Plug the connected devices into the mains socket

before switching on the POWER ON/OFF switch at

the back of the TV.

3. Press the

button at the front of the TV or on the

remote control to turn on your TV.

4. The TV will change the input source to SCART 1 or

SCART 2 automatically once the AV device is switched

on.

Connecting an AV Device with S-Video Cable

1. Use a S-Video cable to connect the TV’s S-VIDEO

input socket to an external AV device’s S-VIDEO

output socket.

2. Use the supplied AV cable to connect the TV’s

AUDIO(L/R) input sockets to the external AV

device’s audio output sockets. (Audio Left = white,

and Audio Right = red)

3. Plug the connected devices into the mains socket

before switching on the POWER ON/OFF switch at

the back of the TV.

4. Press the

button at the front of the TV or on the

remote control to turn on your TV.

5. Press the SOURCE button to display the Source

List. Use the

buttons to select S-VIDEO and

then press the OK button or the

button to

confirm.

Rear View of TV

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

S-Video Cable

(not included)

Satellite Receiver

Video Camera

VCR

DVD Player

Set-top Box

Game Console

AV Cable

(included)

Yellow (Video)

Red (R)

White (L)

Rear View of TV

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

SCART Cable

(not included)

Satellite Receiver

VCR

DVD Player / Recorder

Set-top Box

Connections

Connecting an AV Device with Composite Cable

1. Use an AV cable to connect the TV’s AUDIO(L/R)/

VIDEO input sockets to an external AV device’s

composite audio/video sockets. (Video = yellow,

Audio Left = white, and Audio Right = red)

2. Plug the connected devices into the mains socket

before switching on the POWER ON/OFF switch at

the back of the TV.

3. Press the

button at the front of the TV or on the

remote control to turn on your TV.

4. Press the SOURCE button to display the Source List.

Use the

buttons to select AV and then press the

OK button to confirm.

Satellite Receiver

Rear View of TV

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

AV Cable

(not included)

Video Camera

VCR

DVD Player / Recorder

Set-top Box

Game Console

Yellow (VIDEO)

Red (R)

White (L)

Connections

Connecting a USB Storage Device

1. Switch off the TV before connecting any USB storage

device.

2. Connect your USB storage device to the USB port of

your TV.

3. Plug the connected devices into the mains socket

before switching on the POWER ON/OFF switch at

the back of the TV.

4. Press the

button at the front of the TV or on the

remote control to turn on your TV.

5. Press the SOURCE button to display the Source

List. Use the

buttons to select Media and

then press the OK button to confirm. (Refer to

page 43-45 for details.)

Alternative

Press the MEDIA button to enter Media mode directly. (Refer to

page 43-45 for details.).

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

Rear View of TV

USB Cable

Adapter

Portable

hard Disk

USB

Connecting the Aerial

Connect one end of the RF coaxial cable to the aerial

socket on the wall and the other end of the cable to

the RF IN (75Ω) socket on the right rear side of your

TV.

DVR USB HDMI1 HDMI2

SCART 1 SCART 2

S-VIDEO

OFF

RF coaxial cable

(not included)

Do not connect the TV to the mains

supply until you have completed all the

connections.

• If a hard disk is used, make sure its mains adapter is connected to the mains supply.

• This TV does not support USB hub connection.

• The maximum supported storage space of the hard disk is 1 TB.

• The file system only supports FAT32 format.

• If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not

be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement

will be shown on the screen. If this happens, please upgrade your USB storage device.

• The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is

normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.

• Disconnect the USB storage device if it is not in use.

Initial Setup

Turning the TV On for the First Time

1. Connect the mains cable to the mains socket after you have

completed all the connections.

2. Switch on the POWER ON/OFF switch at the back of the TV. At this

stage, the TV switches to standby mode. The red LED indicator will

illuminate on the front panel of the TV.

3. In standby mode, press the

button at the front of the TV or on the

remote control to turn your TV on. The red LED indicator will turn

green.

OFF

To the mains socket

6. Press the buttons to select the country where you will operate the TV.

Press the OK button or the GREEN button to enter the Setup 3 menu. You

may press the RED button to return back to the previous menu.

7. Press the GREEN button to start the auto tune. Auto tuning will commence.

The display will show the progress of the tuning and the number of channels

found.

You may press the EXIT button to stop the auto tuning.

Always disconnect the TV from the mains socket when not in

use for a long period of time.

The

button at the front of the TV or on the remote control

is only used for switching the TV into standby, it does not

disconnect the TV from the mains power. To completely

disconnect the mains power, please remove the mains plug

from the mains socket.

4. The first time you turn the TV on, it will go straight into the First Time

Installation menu. (If you have already installed the TV using the Quick Start

Guide, please go to the next step “Selecting the Input Source” on the next

page.)

5. Press the

buttons to select the language you will use to operate the TV.

Press the OK button or the GREEN button to enter the Setup 2 menu.

Initial Setup

Favourite Channel Selection

• To use the below functions, you need to preset your favourite channels (refer to

page 23 for details on Favourite Manager).

• Press the FAV button to view the Favourite List. Press the

buttons to select

between Favourite List 1 / 2 / 3 / 4 and then press the

buttons to highlight

the channel. Press the OK button to view the selected channel.

• Press the FAV + / – buttons repeatedly to select the favourite channel in the

selected Favourite List. If you want to change your selected Favourite List, press

the FAV button to view the Favourite List and then press the

buttons to

change your Favourite List.

Selecting the Input Source

1. Press the SOURCE button to display the input source list.

2. Press the

buttons to select the input source that you want:

TV / DTV / Media / AV / S-Video / PC / YPBPR / SCART 1 / SCART 2

/ HDMI 1 / HDMI 2.

3. Press the OK button to confirm your selection.

Channel Selection

• Press the CH + / – buttons repeatedly or the 0-9 buttons to select the channel.

Alternative

In DTV mode, press the OK button to enter the Channel List. Then

use the

buttons to highlight and select the channel. Press the OK

button to view the selected channel.

If a blocked channel is selected, the password screen will be displayed.

Press the 0-9 buttons to enter the password, the channel will then be

unlocked (refer to page 22-23 for details on Channel Manager).

• Press the

button to return to the previously viewed channel.

Volume Adjustment

• Press the VOL + / – buttons to adjust the volume.

• If you wish to switch the sound off, press the

button, press the button again or the VOL+ button to resume audio

listening.

Initial Setup

Subtitle Language for DTV

While watching a DTV programme, you can press the SUBTITLE

button to display the Subtitle menu, and select the available subtitle

language.

• Use the

buttons to activate / turn off the subtitle. Use the

buttons to select the available subtitle language. Press the

OK button to confirm.

• Press the EXIT button to exit the Subtitle menu.

The Channel Information Window in TV Mode

1 Channel name

2 Current channel number

3 Colour system of the current channel

4 Sound system of the current channel

5 The NICAM mode of the current programme.

Press the AUDIO button repeatedly to switch among the

following modes:

4 5

Display Channel Information

• Press the DISPLAY button to view the current information.

TV Mode

DTV Mode

The Channel Information Window in DTV Mode

1 Current channel number and channel name

2 Current programme name

3 Current time

4 Current programme’s start - stop time.

5 Current programme contains alternative audio track.

6 Current programme contains teletext / interactive

service.

7 Current programme contains subtitles.

4 5 6 72

Audio Language for DTV

While watching a DTV programme, you can press the AUDIO button

to display the Multi-Audio menu, and select audio language, audio

format and sound track.

• Use the

buttons to select an audio language or audio format

if available. Press the

buttons to select sound track between

Stereo / Left / Right. Press the OK button to confirm.

• Press the EXIT button to exit the Multi-Audio menu.

Not all DTV programmes provide subtitles.

Page is loading ...

Logik L37DIGB10 User manual

Brand: Logik

Model: L37DIGB10

Category: LCD TVs

Type: User manual

Download PDF

report

Logik L37DIGB10 User manual

Logik L37DIGB10 User manual

Related papers

Other documents