Hunter Fan 59189 Owner's manual

Category
Household fans
Type
Owner's manual

Hunter Fan 59189 is a versatile and powerful ceiling fan that can provide comfort and performance in your home or office for many years. Its features include:

  • Adjustable speed settings: You can choose the ideal speed for your comfort level, from a gentle breeze to a powerful airflow.
  • Reversible motor: The fan's motor can be reversed to circulate warm air in the winter and cool air in the summer, helping to reduce energy costs.
  • Included light kit: The fan comes with a light kit that provides ample illumination for your space.
  • Remote control: The included remote control allows you to conveniently operate the fan from anywhere in the room.

Hunter Fan 59189 is a versatile and powerful ceiling fan that can provide comfort and performance in your home or office for many years. Its features include:

  • Adjustable speed settings: You can choose the ideal speed for your comfort level, from a gentle breeze to a powerful airflow.
  • Reversible motor: The fan's motor can be reversed to circulate warm air in the winter and cool air in the summer, helping to reduce energy costs.
  • Included light kit: The fan comes with a light kit that provides ample illumination for your space.
  • Remote control: The included remote control allows you to conveniently operate the fan from anywhere in the room.
www.HunterFan.com
1.888.830.1326
Table of Contents
Congratulations on purchasing
your new Hunter® ceiling fan! It will
provide comfort and performance
in your home or ofce for many
years. This installation and operation
manual contains complete
instructions for installing and
operating your fan.
We are proud of our work and
appreciate the opportunity to
supply you with the best ceiling fan
available anywhere in the world.
To register your fan, please visit:
www.HunterFan.com/register
Save your receipt for proof of purchase.
PAGE
5
PAGE
20
30 inches
7 feet
PAGE
2
What to Expect with
Your Installation
Ceiling Bracket
Ladder
PAGE
3
Tools Needed
Troubleshooting
?
?
?
PAGE
18
Mounting Options
PAGE
7
PAGE
10
Wiring CanopyDownrod
PAGE
12
Blades
PAGE
13
PAGE
4
Remote Control
PAGE
17
Operation,
Maintenance & Cleaning
PAGE
15
Light Kit
PAGE
6
Blade Irons &
Top Housing
PAGE
14
Switch Housing
1
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
1.888.830.13261.888.830.1326
What to Expect with Your Installation
Know your wiring
If you are unfamiliar
with wiring, use a
qualied electrician.
You may need a
friend to help you.
Check box to see
fan weight
Assess location
30 inches
from blade tip
to nearest wall
or obstruction
7 feet
from bottom
edge of blade
to the oor
Select a downrod length
Assess ceiling angle
Must be able to
secure the fan to
building structure or
fan-rated outlet box
1
2
3
Standard Downrod
for ceilings 8-10 feet high
Shorter Downrod
for fans installed close to ceiling
Longer Downrod
for ceilings 10 feet or higher
2
Ceiling angles greater
than 34° will require an
Angled Mounting Kit.
See page 4 for details.
w.1 - To reduce the risk of re, electrical shock, or personal injury,
mount fan directly from building structure and/or an outlet box marked
acceptable for fan support of 70 lbs (31.8 kg) and use the mounting
screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or servicing your
fan, disconnect the power by turning off the circuit breakers to the outlet
box and associated wall switch location. If you cannot lock the circuit
breakers in the off position, securely fasten a prominent warning device,
such as a tag, to the service panel.
w.3 - To reduce the risk of re, electrical shock, or motor damage, use only
Hunter Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade brackets when
installing the blade brackets, balancing the blades, or cleaning the fan. Do not
insert foreign objects in between rotating fan blades.
c.1 - All wiring must be in accordance with national and local electrical codes
ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.
c.2 - Use only Hunter replacement parts.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: modications not approved by the party responsible for compliance
could void user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Read and Save These Instructions
This product conforms to UL Standard 507.
WARNINGS
CAUTIONS
www.HunterFan.com
1.888.830.1326
Tools Needed
Ladder
Power Drill
(optional)
9/64” Drill Bit
(optional)
Screwdrivers
Pliers Wire Strippers
If mounting to a support structure, you will also need these tools.
3
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
4
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
If you have an angled ceiling:
1. You will need a longer downrod (sold separately).
2. If your ceiling angle is greater than 34°, you will
also need an Angled Mounting Kit (sold separately).
Guide Touches
BOTH Ceiling & Wall
S
I
T
U
A
T
I
O
N
1
Guide Touches
Wall
but
NOT Ceiling
S
I
T
U
A
T
I
O
N
2
You need BOTH
a Longer
Downrod &
an Angled
Mounting Kit
You need ONLY
a Longer
Downrod
*most common
If you have a at ceiling:
Hang your fan by a standard downrod (included).
Mounting Options
Use Standard Mounting
or Low-Prole Mounting
to hang the fan from a at ceiling.
Use Angled Mounting
to hang the fan from a
vaulted or angled ceiling.
4
34
O
CEILING
WALL
OPTION
1
Standard
Mounting
OPTION
2
Angled
Mounting
2 3
SLIDE
toward ceiling
PLACE
against wall
1
FOLD
on dotted line
34°
Use the three steps below to determine if your ceiling angle is greater than 34°
Support
Structure
Ceiling
Outlet Box
(required)
Angled
Mounting
Style
Standard
Mounting
Style
Support
Structure
Ceiling
Outlet Box
(required)
1.888.830.1326
www.HunterFan.com
www.HunterFan.com
1.888.830.1326
Ceiling Bracket
Refer to warning w.1 on pg. 2
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
For angled ceilings, point
opening toward peak.
If you are unable to do this,
call Technical Support at
1-888-830-1326.
Make sure all four bumpers are
still attached.
Use wood screws
(included) when securing
to support structure with
approved electrical outlet
box. Drill 9/64” pilot holes
in support structure to aid
in securing ceiling bracket
with hardware found in
the hardware bag.
Use machine screws
(provided with outlet
box) when securing to
existing ceiling fan-rated
outlet box. Make sure
it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
OFF
Turn Power
5
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Blade Irons & Top Housing
KEEP!
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Install the top housing using
the three top housing screws.
K
E
E
P
!
Lightly attach the blade irons
to the motor with screws found
in the hardware bag, then
securely tighten after both
screws are attached.
6
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
7
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
Downrod
Slide
Slide
1 2 3 4 5
678910
Sold Separately
Included
Longer
Downrod
for angled
ceilings or
ceilings 10’ or
higher
Shorter
Downrod
for fans installed
close to ceiling
Standard
Downrod
for ceilings 8-10’ high
Option 1Option 2
Option 3
skip to next page
If you need a different downrod length follow these steps:
Steps 1-5 to remove standard downrod pipe
Steps 6-10 to reassemble with new pipe
Included
(pre-assembled)
www.HunterFan.com
1.888.830.1326
8
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
8”
3/8”
C
U
T
&
S
T
R
I
P
(not to scale)
Hand tighten the downrod (at
least 4-5 full turns) until it stops.
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
Downrod (continued)
8”
3/8”
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
www.HunterFan.com
1.888.830.1326
Downrod (continued)
DO NOT PICK THE FAN UP BY THE
CANOPY OR WIRES. Place the downrod
ball into the slot in the ceiling bracket.
Put the wires and downrod through the
canopy. Let the canopy sit loosely on top
of the fan.
9
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Wiring
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Refer to CAUTION c.1 on pg. 2
F
R
O
M
C
E
I
L
I
N
G
F
R
O
M
C
E
I
L
I
N
G
B
R
A
C
K
E
T
green/yellow
stripe (grounding)
green/yellow
stripe
green/yellow stripe
Note: To connect the wires, hold
the bare metal leads together and
place a wire connector over them,
then twist clockwise until tight.
Using an orange wire connector
from the hardware bag:
Connect the 3 grounding wires
(green, green/yellow stripe, or bare
copper) coming from the ceiling,
downrod, and ceiling bracket.
F
R
O
M
F
A
N
Receiver
Place the receiver on top of the downrod
assembly as shown.
Tip: If you have difculty tting the receiver
into place, make sure you have cut the excess
wires from the fan. See the Downrod section
for more details.
10
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Wiring (continued)
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Refer to CAUTION c.1 on pg. 2
Note: If you have a dual switch,
please cap the secondary power
wire from the ceiling. This will
result in one unused switch.
Using the orange wire connectors
from the hardware bag:
Connect the black (ungrounded)
wire from the ceiling to the black
wire from the receiver.
Connect the white (grounded)
wire from the ceiling to both the
white wire from the receiver and
the white wire from the fan.
F
R
O
M
R
E
C
E
I
V
E
R
black
blue
yellow
blue
Using the orange wire connectors
from the remote control hardware bag:
Connect the yellow wire from
the receiver to the black wire
from the fan.
Connect the blue wire from the
receiver to the blue wire (or
possibly black with white stripe
wire) from the fan.
F
R
O
M
F
A
N
F
R
O
M
R
E
C
E
I
V
E
R
F
R
O
M
C
E
I
L
I
N
G
black
(ungrounded)
white (grounded)
black
white
F
R
O
M
F
A
N
white
11
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Canopy
Lift the canopy into place so that
the screw holes are aligned.
Position the canopy so that, when
lifted into place, the canopy ts into
the hanging bracket as shown.
Insert the two canopy screws
found in the hardware bag.
Note: Fan style may vary.
Screw
Holes
12
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Blades
Secure each blade to a blade iron as shown using
the blade nuts, found in the hardware bag,
and the blade assembly screws, found in the
hardware bag.
13
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing xture falling.
Switch Housing
Feed the 9-pin plug connector coming from
the bottom of the motor housing through
the center hole in the light kit assembly.
Connect it to the plug connector found
in the switch housing area of the light kit
assembly. Make sure to line up the colored
markings on the connectors.
Partially install two light kit assembly
screws, found in the hardware bag,
halfway into the motor housing as
shown. It does not matter which two
screw holes you choose.
Align the keyhole slots in the top of
the light kit assembly with the partially
installed assembly screws. Wrap the
keyhole slots around the screws and
twist counterclockwise.
14
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
15
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
Light Kit
Make sure the light kit assembly is securely attached to the
motor housing. Failure to properly secure all three assembly
screws could result in the light xture falling.
Insert a third light kit assembly screw,
found in the hardware bag, into place
and tighten all three screws securely.
Carefully push all switch housing
components into the switch housing,
then install the switch housing plate
using two light kit assembly screws,
found in the hardware bag.
www.HunterFan.com
1.888.830.1326
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker afxed to the light socket(s)
may result in re hazard or improper operation.
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
Position the notches in the outer rim of
the globe so they line up with the tabs on
the inside surface of the light xture rim.
Carefully lift the globe up inside the light
xture as far as it will go. Rotate the globe
in a clockwise direction until it is held
tightly in place by the three tabs.
Install a light bulb in each socket.
When necessary, replace with bulbs of
the same wattage.
Bulb
Notch
Tab
16
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Remote Control
To access the battery compartment, remove
the small Phillips head screw that secures the
battery door to the transmitter assembly. The
battery should be installed with the positive
(+) side up. Replace with a CR2032 battery
when necessary.
The remote transmitter should already be paired
to the receiver and ready to use.
Note: If your need to pair your remote, turn fan
power off and back on at the wall switch. Within 3
minutes, press and hold both the Fan OFF button
and the Fan ON button for 4 seconds to pair the
remote. To prevent faulty operation, please
ensure all other ceiling fans within range are
turned off at the wall switch while pairing.
ON
Turn Power
Phillips
Head
Screw
Battery
Door
17
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Operation, Maintenance, & Cleaning
The Fan Off button only turns the
fan off. To turn the fan on, press
one of the fan speed buttons.
High
Medium
Low
ooo
oo
o
Quickly press the Light button to turn
the lights off and on. Hold the Light
button to raise and dim the light level.
Dimming Mode: To enable dimming,
your remote must be set to Dimming
Mode. To toggle Dimming Mode on
or off, hold down the Fan Off button
while pressing the Light button twice.
Low
Medium
High
Fan Off
Light
Press the Fan Off button for at
least three seconds to initiate the
Safe-Exit Mode.
The lights will ash for visual
conrmation.
The lights will stay on 50%
brightness for 15 seconds and
then begin to dim. After a total
of 30 seconds, the lights will be
completely off.
The Safe-Exit Program gives
you about thirty seconds of light
when you turn the lights off to
exit the room before the lights
go out. To use Safe-Exit:
Safe-Exit
18
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
For cleaning the fan, use soft brushes or
cloths to prevent scratching. Cleaning
products may damage the nishes.
To switch the direction of air ow, remove
the globe assembly and move the reverse
switch to the opposite position. Reinstall
the globe assembly.
Reverse
Switch
Operation, Maintenance, & Cleaning (continued)
19
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Troubleshooting
Excessive wobbling
Tighten all of the blade and
blade iron screws until they
are snug.
Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
Use the provided balancing
kit and instructions to balance
the fan.
Noisy Operation
Tighten the blade and blade
iron screws until they are snug.
Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Fan doesn’t work
Make sure power switch is on.
Pull the pull chain to make sure
it is on.
Push the motor reversing switch
rmly left or right to ensure that
it is engaged.
Check the circuit breaker to
ensure the power is turned on.
Make sure the blades spin freely.
Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on pages 10-11.
Check the plug connection in
the switch housing.
Remote control of fan is erratic
Make sure the battery is
installed correctly.
Install a fresh battery.
If you have multiple remotes or
multiple remote-controlled fans
installed on the same circuit
breaker and you are experiencing
interference or faulty operation of
your remote controls, please go to
www.HunterFan.com/FAQs
and click “How do I properly install
multiple remote-controlled fans?”
for information on how to correct
this issue.
20
M3590-01 • 01/13/16 • © 2016 Hunter Fan Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Hunter Fan 59189 Owner's manual

Category
Household fans
Type
Owner's manual

Hunter Fan 59189 is a versatile and powerful ceiling fan that can provide comfort and performance in your home or office for many years. Its features include:

  • Adjustable speed settings: You can choose the ideal speed for your comfort level, from a gentle breeze to a powerful airflow.
  • Reversible motor: The fan's motor can be reversed to circulate warm air in the winter and cool air in the summer, helping to reduce energy costs.
  • Included light kit: The fan comes with a light kit that provides ample illumination for your space.
  • Remote control: The included remote control allows you to conveniently operate the fan from anywhere in the room.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI