2. Dunlop
  3. GCJ95

Dunlop GCJ95 User manual

  • Hello! I am an AI chatbot trained to assist you with the Dunlop GCJ95 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GARY CLARK JR. CRY BABY
®
WAH
GC95
GCJ95 GARY CLARK JR. CRY BABY
®
WAH 2
GCJ95 GARY CLARK JR. CRY BABY
®
WAH 3
BASIC OPERATION
POWER
The Gary Clark Jr. Cry Baby
®
Wah is powered by one 9-volt battery
(remove bottom plate to install), the Dunlop ECB003 9-volt adapter,
or the DC Brick
™
, Iso-Brick
™
, and Mini Iso-Brick
™
power supplies.
OPERATION
1. Run an instrument cable from your guitar to the GCJ95’s
INSTRUMENT jack and another instrument cable from the GCJ95’s
AMPLIFIER jack into your amplifier’s input.
2. Push the toe of the pedal down until you feel a “click” to turn the
pedal on/off.
3. Rock your foot back and forth on the pedal to hear the vocal,
expressive tones that the Cry Baby Wah is famous for.
GCJ95 GARY CLARK JR. CRY BABY
®
WAH 4
SPECIFICATIONS
Input Impedance 800K
Output Impedance 10K
IMPEDANCE
Heel Down 320 Hz to 390 Hz
Toe Down Fine Tune Max 1700 Hz to 2070 Hz
Toe Down Fine Tune Min 1050 kHz to 1270 Hz
FILTER PARAMETER
Input -8.0 dBV
Output +10 dBV
Heel Down +17dB @ 400Hz ~ 500Hz
Toe Down +17dB @ 2.0kHz ~ 2.2kHz
MAXIMUM LEVEL
MAXIMUM GAIN AT CENTER FREQUENCY
Power Requirements 900μA @9V DC (8.1mW no load)
/