PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
1
of
10
Product Manual
Articulating Tablet Holder
ALTO PN 202150-X
Alto Aviation
86 Leominster Rd
PO Box 399
Sterling, MA 01564
Phone: 978.466.5992
800.814.0123
Fax: 978.466.5996
E-mail: tech@altoaviation.com
www.altoaviation.com
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
2
of
10
Revisions
Rev # ECN Date Description
1
NDI
11/13/19
Initial Release
Copyright/Proprietary Notice
Alto products are continually improved and all specifications are subject to change without notice. Information
and data in this document is confidential and proprietary. Reproduction or disclosure of the information contained
in this publication or any portion thereof, by any means, without the express written permission of
Alto Technologies Corporation is prohibited.
Copyright © Alto Technologies Corporation. All rights reserved
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
3
of
10
Service Bulletin List
Service
Bulletin
Number
Subject
Manual
Revision
Number
Manual
Revision
Date
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
4
of
10
Table of Contents
1.0 GENERAL INFORMATION ............................................................................................ 5
1.1 INTRODUCTION ........................................................................................................................ 5
1.2 PURPOSE OF EQUIPMENT ...................................................................................................... 5
1.3 OPERATION .............................................................................................................................. 5
1.4 DESIGN FEATURES ................................................................................................................. 5
1.5 TECHNICAL SPECIFICATIONS ................................................................................................ 7
1.6 202150-X DIMENSIONS ............................................................................................................ 8
2.0 INSTALLATION .............................................................................................................. 9
2.1 GENERAL .................................................................................................................................. 9
2.2 UNPACKING AND INSPECTION ............................................................................................... 9
2.3 MOUNTING HARDWARE ........................................................................................................ 10
3.0 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS ............................................. 10
3.1 PERIODIC MAINTENANCE ..................................................................................................... 10
List of Illustrations
Figure 1: P/N 202150-1 Typical Usage ................................................................................................ 6
Figure 2: P/N 202150-1 Assembly Outline Drawing ............................................................................. 8
Figure 3: P/N 202150-6 Assembly Outline Drawing ............................................................................. 8
Figure 4: Included MGF Sport Adapter .............................................................................................. 10
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
5
of
10
1.0 GENERAL INFORMATION
1.1 Introduction
This manual contains information for the installation of the ALTO Articulating Tablet
Holder, P/N 202150-X where “X” is the depth of the mounting base.
Example P/Ns below:
202150-1, 1” deep base adapter
202150-6, 6” deep base adapter
This document includes product information such as the mechanical characteristics and
installation techniques for the Articulating Tablet Holder
1.2 Purpose of Equipment
The 202150 ALTO Articulating Arm Holder was developed to add a way to hold and secure
tablets/smartphones using pre-existing baseplates in the aircraft. Removal of the
outdated, low resolution monitors and the addition of the Articulating Arm Holder allows
for a simple and instant upgrade with no modification to existing structures. The
articulating arm holders can be quickly removed for taxi, take off, and landing. MyGoFlight
offers a universal tablet holder, or custom holders to attach to your device.
1.3 Operation
To install, place the bottom expanding collet into the baseplate. Align the keyway so the
collet drops to the bottom of the baseplate. Rotate the knurled knob clockwise, securing
the expanding collet in the base plate. Loosen the knob located in the middle of the arm.
Adjust the arm to the desired position. Tighten the knob located in the middle of the arm
to lock the position.
Take the tablet or smartphone with correct MGF device holder (sold separately) and
connect to the arm.
To remove for taxi/take off/landing, squeeze the green buttons on the round attachment
point of the arm and pull to remove the tablet/smartphone. Rotate the knurled knob
counterclockwise until loose. Pull up to remove the arm from the baseplate.
1.4 Design Features
• Anodized Aluminum and Stainless Steel Construction
• Quick Connect
• 360° Rotation of Device
• Infinitely Adjustable
• Vibration Minimized
• Requires no structure modifications
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
6
of
10
(Tablet and Device Holder (Case) not included)
Figure 1: P/N 202150-1 Typical Usage
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
7
of
10
1.5 Technical Specifications
Components MyGoFlight MNT-1840 or similar, fixed to ALTO 1”
OD Keyed Expanding Collet
Base Compatibility Rosen 0100-002, 0100-004, 0100-005, 0100-0015,
0100-042, 0100-043. Contact ALTO for additional
information.
Physical Specifications
Weight 202150-1: <372g/13oz
202150-6: <519g/18.3oz
Dimensions See outline drawing in Section 1.6 DA drawing
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
8
of
10
1.6 202150-X Dimensions
Figure 2: P/N 202150-1 Assembly Outline Drawing
Figure 3: P/N 202150-6 Assembly Outline Drawing
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
9
of
10
2.0 INSTALLATION
2.1 General
The information in this section assists the installer of the unit. Conformity to the electrical
wiring and mechanical mounting guidelines will help to ensure proper operation of the unit.
Review all information in this section before proceeding with the installation of the unit.
For assistance during installation please contact Alto using the following contact
information:
Alto Aviation
86 Leominster Rd
PO Box 399
Sterling, MA 01564
Phone: 978.466.5992
800.814.0123
Fax: 978.466.5996
E-mail: tec[email protected]
www.altoaviation.com
When connecting this unit to another manufacturer’s product, consult the manufacturer’s
specifications and installation instructions pertaining to their equipment.
2.2 Unpacking and Inspection
Carefully open the packaging and remove the product. Visually inspect the unit for
evidence of physical damage during shipment. Retain the packing materials and all
documentation received with the unit. Verify that all components on the packing list have
been received.
If the unit has been damaged during shipment, call Alto at 800.814.0123. A claim must
be filed with Alto immediately after unpacking. Alto will assign a RMA Number (Returned
Material Authorization) and give instructions for shipment. Please use the original carton
and packing materials for shipping back to Alto.
PRODUCT MANUAL
PN 202150-X
Size Doc Type Drawing Number Rev # Date Page
A PM 202150PM 1 11/13/19
10
of
10
2.3 Mounting Hardware
MGF Sport Adapter included (below).
Figure 4: Included MGF Sport Adapter
Base Receptacle not included. Device Holder not included.
3.0 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS
3.1 Periodic Maintenance
No periodic scheduled maintenance or calibration is required for continued airworthiness
of this product. If the unit fails to perform to specifications, it must be removed and
serviced by a qualified service facility.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Alto 202150 Series User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
CTA PAD-TPADM User manual
-
-
Rosen 7002 User manual
-
Honeywell Bendix/King KRA 405B User manual
-
Alto-Shaam AR-7T Owner's manual
-
Diamond DA20-C1 User manual
-
Nilfisk-ALTO SCRUBTEC 784 L User manual
-
Garmin GDU 370 Installation guide
-
FDS FD70CMT-M Operating instructions
-
Garmin PAV80 User manual
