ABB ScreenMaster RVG200 Battery Replacement Procedure

Brand: ABB

Model: ScreenMaster RVG200

Type: Battery Replacement Procedure

—

ABB MEASUREMENT & ANALYTICS | INSTRUCTION | IN/RANDC/006-EN REV. A

ScreenMaster RVG200

Paperless recorder

Battery replacement

Measurement made easy

1 Introduction

This publication details replacement of the battery

(B12454) fitted to the baseboard of the RVG200

Paperless recorder. The procedure must be carried

out by a trained technician.

Tools required

• Medium flat-bladed screwdriver

2 For more information

Further information is available from:

www.abb.com/recorders

or by scanning these codes:

Sales Service

3 Safety

IMPORTANT NOTE

Dispose of the old components as detailed in the

Operating Instructions (OI/RVG200-EN).

ScreenMaster RVG200

paperless recorder

2 IN/RandC/006-EN Rev. A | ScreenMaster RVG200 | Paperless recorder | Battery replacement

4 Replacing the battery

1. Isolate the recorder from the power supply.

Referring to Fig. 4.1:

2. Remove the tamper evident seal A if fitted.

3. Using a medium flat-bladed screwdriver, unscrew jacking

screw B.

4. Remove chassis C from case D.

Referring to Fig. 4.2:

5. Locate the mounted battery E on the underside of the

case.

Referring to Fig. 4.3:

6. Remove the battery from the battery-mount F and fit a

new battery.

Referring to Fig. 4.1:

7. Insert chassis C into case D.

8. Using a medium flat-bladed screwdriver to secure jacking

screw B to case D.

9. Fit new tamper evident seal A (if required).

10. Restore power to the recorder and proceed to Section 5,

page 3.

CAUTION – Property damage

The recorder is vulnerable to electrostatic damage.

Wear an anti-static strap or place the instrument on

an anti-static workbench.

Fig. 4.1 Removing the recorder from its case

Fig. 4.2 Locating the battery

Important note

Dispose of the old battery as detailed in the

Operating instructions (OIRVG200-EN).

Fig. 4.3 Replacing the battery

ScreenMaster RVG200 | Paperless recorder | Battery replacement | IN/RandC/006-EN Rev. A 3

5 Setting the time and date

To access the Configuration menus:

1. Touch on the first Operator menus page.

2. Enter an operator password (if configured).

3. Select the Edit Configuration mode by touching the

button.

The System Configuration page is displayed:

4. Press Common.

The Common Configuration menu is displayed:

5. Select Time and press (next to the Date and time

box).

A warning dialog is displayed:

6. Press .

The Date and time menu is displayed:

7. Set the required time and date using the instrument

touchscreen. Once finished, press and exit and

save the configuration as normal.

Important note

Once the battery has been removed, the battery failed

icon is displayed on the front panel of the unit. To

restore normal operation, the correct time and date

must set.

Important note

Changing the time will potentially cause loss of

data. Ensure that all data archiving is up to date

before proceeding.

IN/RandC/006-EN Rev. A 12.2018

—

We reserve the right to make technical changes or modify the contents of this document

without prior notice. With regard to purchase orders, the agreed particulars shall prevail.

ABB does not accept any responsibility whatsoever for potential errors or possible lack of

information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained

therein. Any reproduction, disclosure to third parties or utilization of its contents – in

whole or in parts – is forbidden without prior written consent of ABB.

—

ABB Limited

Measurement & Analytics

Howard Road, St. Neots

Cambridgeshire, PE19 8EU

Tel: +44 (0)0870 600 6122

Fax: +44 (0)1480 213 339

Email: instrumentat[email protected]

ABB Inc.

Measurement & Analytics

125 E. County Line Road

Warminster

PA 18974

USA

Tel: +1 215 674 6000

Fax: +1 215 674 7183

abb.com/measurement

ABB ScreenMaster RVG200 Battery Replacement Procedure

ABB ScreenMaster RVG200 Battery Replacement Procedure

ABB ScreenMaster RVG200 Battery Replacement Procedure

Related papers

Other documents