Audipack DWM-991M EOL User manual

Brand
Audipack
Model
DWM-991M EOL
Type
User manual

Audipack DWM-991M EOL is a dynamic wall mount designed for mounting screens. It ensures that the screen is always perfectly vertical and allows for easy height adjustment. It is crucial to use the correct mounting materials that are applicable to the wall material and construction, and all provided mounting points of the wall mount should be utilized.

The wall mount is equipped with a gas spring that is already set for the monitor weight to be used. The nominal load, which is the sum of the screen weight and monitor bracket, is indicated on a label attached to the product. Before adjusting the height of the monitor, the foot brake must be pressed to release the lock.

Audipack DWM-991M EOL is a dynamic wall mount designed for mounting screens. It ensures that the screen is always perfectly vertical and allows for easy height adjustment. It is crucial to use the correct mounting materials that are applicable to the wall material and construction, and all provided mounting points of the wall mount should be utilized.

The wall mount is equipped with a gas spring that is already set for the monitor weight to be used. The nominal load, which is the sum of the screen weight and monitor bracket, is indicated on a label attached to the product. Before adjusting the height of the monitor, the foot brake must be pressed to release the lock.

User manual dynamic wall mount
Copyright Audipack (version 31-03-09)
1.
Zorg er voor dat de wandsteun altijd perfect vertikaal
tegen de wand wordt gemonteerd.
Zorg ervoor dat het onderste punt van de wandsteun
ca. 15 mm boven de afwerkvloer hangt!
Be sure the wall mount is gastened to the wall in strict
vertical position.
Be sure there’s a 15 mm clearance between the finished floor
and lowest part of the wall mount.
15 mm
2.
Maak gebruik van alle voorziene montagepunten van de wandsteun.
Gebruik de juiste montagemetarialen die geschikt zijn voor het type wand en mogelijk
achterliggende constructie.
Install the wall mount in a proper way. The wall mount is under influence of manual force.
Use correct mounting material that is applicable to the walls manterial and construction.
3.
The wandsteun is voorzien van een gasveer die is afgestemd op het gewicht van het
beeldscherm dat u gaat gebruiken. Op de steun is een typesticker aangebracht met
gewichtsaanduiding van de nominale belasting.
De nominale last is een opstelsom van het gewicht van het beeldscherm en de monitorbeugel.
The wall mount is equipped wit a spring that is already set for the monitor weight to be used.
On the back / side of the product a lable is attached that shows the right nominal load.
The nominal load is the sum of the screen weight and monitor bracket.
Example / voorbeeld:
390991-710
Load in Newton (710 N = 71 Kg)
Product number
4.
Alvorens het beeldscherm in hoogte te verstellen, dient het voetpendaal ingedrukt te worden.
Na indrukken komt de blokkering vrij en kan het beeldscherm in hoogte worden versteld.
Before attempting to set the height of the monitor, please release the foot brake first.
When pressing the pedal, the brake releases to manually set the right height of the monitor.
Brake / rem
5.
Bij juiste installatie is de wandsteun vrij van de vloer gemonteerd. Nu is het moglijk door de
stelknop bovenop de steun te lossen en het beeldscherm links of recht te verdraaien.
Doe dit met beleid, te hard draaien kan in de eindposities de wandbevestigingen of het
beeldscherm overbelasten.
With a correct installation, the wall mount is free from the floor.
By releasing the lock on top of the floor stand, it is possible to pan the screen left or right.
Please pan with care; when reaching the end limits with to much forc, the wall mounting
points may be overloaded..
.
5.
Indien gebruikt gemaakt wordt van de landscape adapter P3496, moet dit gewicht (eigen
gewicht 8 Kilo) bij de veerdruk bijgeteld worden. De veerdruk in de vloersteun kan niet
achteraf aangepast worden en dient vooraf aangemeld te worden.
When the landscape adapterP3496 is applied to the set, the extra weight ( 8 Kg) of the
product must be added to the spring force. This can not be modified afher installation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Audipack DWM-991M EOL User manual

Brand
Audipack
Model
DWM-991M EOL
Type
User manual

Audipack DWM-991M EOL is a dynamic wall mount designed for mounting screens. It ensures that the screen is always perfectly vertical and allows for easy height adjustment. It is crucial to use the correct mounting materials that are applicable to the wall material and construction, and all provided mounting points of the wall mount should be utilized.

The wall mount is equipped with a gas spring that is already set for the monitor weight to be used. The nominal load, which is the sum of the screen weight and monitor bracket, is indicated on a label attached to the product. Before adjusting the height of the monitor, the foot brake must be pressed to release the lock.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents