Audipack LSS Series User manual

Brand
Audipack
Model
LSS Series
Category
Speaker sets
Type
User manual

Audipack LSS Series The Audipack LSS Series soundbar systems are versatile and powerful audio solutions for various applications. With their ability to be installed on a table stand, wall-mounted, or even integrated into VCF furniture, they offer great flexibility in terms of placement. The LSS Series also supports the integration of System 55 units, allowing for the creation of customized audio systems tailored to specific needs.

Key features and functionalities of the Audipack LSS Series include:

  • Versatile installation options: Can be placed on a table stand, wall-mounted, or integrated into VCF furniture, providing flexibility in placement.

Audipack LSS Series The Audipack LSS Series soundbar systems are versatile and powerful audio solutions for various applications. With their ability to be installed on a table stand, wall-mounted, or even integrated into VCF furniture, they offer great flexibility in terms of placement. The LSS Series also supports the integration of System 55 units, allowing for the creation of customized audio systems tailored to specific needs.

Key features and functionalities of the Audipack LSS Series include:

  • Versatile installation options: Can be placed on a table stand, wall-mounted, or integrated into VCF furniture, providing flexibility in placement.
LSS / LST soundbar systems
© Audipack
1.
Remove the front from the speaker.
Pull gently at the front cover.
Peel of the corners.
2.
Connect the amplifier cables to the speaker using the connector inside the speaker.
It is also possible to insert a small amplifier inside the speaker. Use double adhesive tape to secure it firmly.
3.
For installing the soundbar to a table stand, wall mount or floor stand, follow up the manual provided with
the accessory.
Available accessories:
• Table stand
• Wall mount
• Floor stand mounting bracket
• Subwoofer LS-80SW
L (+) L (-) R (-) R (+)
© Audipack
Installing the LSS-SB20 or SB40 in a VCF furniture
1.
Remove the rear panel from the furniture. (and if wished the top panel to install the speaker in the
furniture.
Rotate-in the brackets into the profiel slots of the VCF furniture.
Fasten the speaker gently with an alan key on any desired height in the furniture.
2.
Connect the amplifier cables to the speaker using the connector on the back side of the speaker.
© Audipack
Installing the System-55 in a LSS / LST soundbar
Follow step by step the below listed instructions for installing System 55 units in the soundbar.
System 55 is available in 1-2-3 versions.
Remove front covers
Install frame
Install unit
Install cover
Install frame cover
Install covers
© Audipack
Audipack's general conditions of sales and delivery apply to all of Audipack's
deliveries. These conditions can be downloaded from Audipack's website,
www.audipack.com, or will be sent by post on request.
Audipack liefert ausschließlich unter die allgemeine Verkauf- und
Lieferungsbedingungen von Audipack. Diese Bedingungen sind zum downloaden
verfügbar auf die Webseite von Audipack, www.audipack.com, oder werden
Ihnen auf Anfrage per Post gesendet.
Alle leveringen geschieden uitsluitend volgens de Algemene Verkoop- en
Leveringsvoorwaarden van Audipack. Een afschrift hiervan kunt u downloaden
van de website van Audipack, www.audipack.com, of wordt u op aanvraag
gestuurd per post.
Les conditions de vente et de livraison de Audipack s'appliquent à tous les
livraisons de Audipack. Cette conditions sont disponible sur le site internet de
Audipack, www.audipack.com, où seront envoyé par poste sur demande.
Audipack reserves the right to make changes in specifications and other information contained in this
document without prior written notice. The information provided herein is subject to change without notice. In
no event shall Audipack be liable for any incidental, special, indirect, or consequential damages whatsoever,
including but not limited to lost profits, arising out of or related to this ma nual or the information
contained herein, even if Audipack has been advised of, known, or should have known, the possibility of such
damages.
AUDIPACK
Industriestraat 2-4
2751 GT Moerkapelle
the Netherlands
Tel: +31(0)795931671
Fax: +31(0)795933115
Email: audipack@audipack.com
www.audipack.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Audipack LSS Series User manual

Brand
Audipack
Model
LSS Series
Category
Speaker sets
Type
User manual

Audipack LSS Series The Audipack LSS Series soundbar systems are versatile and powerful audio solutions for various applications. With their ability to be installed on a table stand, wall-mounted, or even integrated into VCF furniture, they offer great flexibility in terms of placement. The LSS Series also supports the integration of System 55 units, allowing for the creation of customized audio systems tailored to specific needs.

Key features and functionalities of the Audipack LSS Series include:

  • Versatile installation options: Can be placed on a table stand, wall-mounted, or integrated into VCF furniture, providing flexibility in placement.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents