Sanyo DVW-7100 Quick start guide

Brand: Sanyo

Model: DVW-7100

Type: Quick start guide

Sanyo DVW-7100 is a DVD player and VCR in one device, equipped with a convenient remote control for easy switching between DVD and VCR modes. It features auto clock setting with XDS (Extended Data Services) information and Daylight Savings Time adjustment for accurate timekeeping. The DVD+VCR has multiple tuning options, including TV and CATV, to ensure compatibility with different signal sources. With its ability to play DVDs and record and playback on VCR, the Sanyo DVW-7100 offers versatile entertainment possibilities.

CONNECTING

AUDIO INPUT

VIDEO

INPUT

ANTENNA

INPUT

RF Cable

Audio Cable

Audio input

Audio out

Video input

Video out

Video Cable

Setting the RF Output Channel and Auto Channel Programming

Press SETUP MENU and the MAIN

menu appear.

Press v/V to select the TUNING menu,

then press SELECT/ENTER.

The TUNING menu will appear.

Press V to choose the SOURCE

SELECT option, then press b/B to

select TUNER.

Press b/B repeatedly to switch among

TUNER, LINE1 and LINE2.

Press v/V to choose the AUTO CHANNEL

SET option, then press b/B to set the

channel.

The tuner will automatically cycle

through all available channels

(TV/CATV) in the area and place them

in the tuner’s memory.

 After the AUTO CHANNEL SET PRO-

CEEDING is complete, the TUNING

menu will hide and return to the TV

screen automatically.

Make sure the TUNING BAND is set

appropriately (TV or CATV).

•

TV : If you are using a standard antenna to

receive channels.

CATV : If you are using basic cable to receive

channels.

• Change the setting of TUNING BAND to

check the TV channels.

Use CH/TRK (v/V) on the remote con-

trol or CHANNEL (V/v) on the front

panel to cycle the DVD+VCR through

the channels in memory.

AAA

Your REMOTE CONTROL HANDSET is

1. To insert them, push the tab backwards

and lift off the cover of the handset.

2. Put the two batteries into the compartment

making sure the and are correctly

positioned.

3. Replace the cover.

Inserting The Batteries

DEW CAUTION

Condensation can form inside the DVD+VCR when it is suddenly moved

from a cold place to a warm or humid environment.In any such circum-

stance do not use this DVD+VCR 1-1/2 to 2 hours allowing complete

elimination of any condensation.

DVD/VCR select button

Select the output source (DVD or VCR) to view

on the TV screen.

To use a VCR, first press VCR.

To use a DVD, first press DVD.

Setting the RF output channel

When the DVD+VCR is turned off, press and hold

CHANNEL (V/v) on the front panel for more then

five seconds to change the RF output channel

(CH03 or CH04).

“RF 03” or “RF 04” appears in the display window.

When using the Audio/Video cable, set your TV to

the VIDEO mode using the TV/VIDEO button on

your TV.

NYC8010MS_QSG_ENG_MP_0519 5/19/04 8:57 AM Page 1

DVD Player + Video Cassette Recorder

DVW-7100

Thank you for buying Sanyo.

This guide will enable the quick

and easy setup of your new

DVD+VCR, simply follow the

procedures inside.

For further details of features,

please refer to the instruction

manual.

Is Everything In The Box?

DVW-7100

Setting the Clock

QQuuiicckk ssttaarrtt

gguuiiddee

Auto Clock Set

The Auto Clock Set feature is set to ON at the facto-

ry. In the ON setting, the DVD+VCR looks for a

channel carrying XDS (Extended Data Services)

information. XDS updates the clock using the

Coordinated Universal Time.

The Auto Clock Feature enables the DVD+VCR to

set up the clock when the DVD+VCR is turned off.

Press MENU and the MAIN menu will appear.

Press v/V to choose the CLOCK menu.

Press SELECT/ENTER and the CLOCK menu

will appear.

Press V to choose the AUTO CLOCK SET option.

Press b/B to choose ON.

The Auto Clock Set works for seting up the

clock when the DVD+VCR is turned off.

Press

to choose the DAYLIGHT SAVINGS

item.

Press b/B to choose AUTO, ON, or OFF.

If you choose AUTO, the VCR sets the clock

using the DST information broadcast in the sig-

nal (channel).

If you choose ON, the VCR sets the clock when

the Daylight Saving Time is started and ended.

Press

to choose the TIME ZONE item.

Press b/B to choose the correct time zone

(AUTO, EASTERN, CENTRAL, MOUNTAIN,

PACIFIC, ALASKA, or HAWAII).

If “AUTO” is selected as the time zone, the VCR

sets the clock using the first Coordinated

Universal Time information when it finds in a

broadcast signal.

Press MENU when finished.

Turn off the DVD+VCR and the auto clock setting

works.

ote

There are cases where the TV station does not send

or sends wrong date and/or time information and the

DVD+VCR sets the incorrect time.

If this happens we recommend that you set the clock

manually.

P/NO : (8)3840R-Q005J

(1E05/04 A)

Printed in China

NYC8010MS_QSG_ENG_MP_0519 5/19/04 8:57 AM Page 2

Sanyo DVW-7100 Quick start guide

Sanyo DVW-7100 Quick start guide

Sanyo DVW-7100 Quick start guide

Related papers

Other documents