Kenwood C-616DV Quick start guide

Type
Quick start guide

Kenwood C-616DV is a Compact Hi-Fi Component System that allows you to enjoy music from various sources, including DVD, USB, SD card, D.AUDIO, iPod, and external components connected to AUX IN. With its AM/FM tuner, you can listen to your favorite radio stations. The system features HDMI and component video outputs for connecting to your TV, enabling you to watch DVDs and other video content. You can also connect headphones to the 3.5mm jack for private listening. The C-616DV supports various playback functions such as repeat, random, and angle adjustment for DVDs.

Kenwood C-616DV is a Compact Hi-Fi Component System that allows you to enjoy music from various sources, including DVD, USB, SD card, D.AUDIO, iPod, and external components connected to AUX IN. With its AM/FM tuner, you can listen to your favorite radio stations. The system features HDMI and component video outputs for connecting to your TV, enabling you to watch DVDs and other video content. You can also connect headphones to the 3.5mm jack for private listening. The C-616DV supports various playback functions such as repeat, random, and angle adjustment for DVDs.

What’s in the Box?
You should fi nd these accessories upon opening the
box.
Quick Start Guide
Compact Hi-Fi Component System
C-616DV
Follow the steps below to use your
Compact Hi-Fi Component System
Connections
Setup
Setup
Setup
Operation
Remote control unit operation
Plug the power cord of the system to a power outlet and
press on the remote control unit to turn the system
ON. After the system is switched ON, press the desired
operation button. Use the remote control unit by pointing
it to the remote sensor on the main unit.
Remote sensor
REMOTE CONTROL UNIT
Approx. 6 m
30°
30°
AM loop antenna
FM indoor antenna
AC adapter
(AC-18335A)
© B60-5822-08/00 (E)
Power cord
Connections
Connecting the FM antenna
1 Connect the lead to the [FM 75Ω] terminal.
2 Find the location that gives the best
reception.
3 Secure the antenna as high up as possible.
• The antenna supplied with the system is a basic
antenna for indoor use. For stable signal reception, the
use of an outdoor antenna (commercially available) is
recommended. Disconnect the indoor antenna first
before connecting an outdoor antenna.
¤ CAUTION on installing an outdoor antenna
Since antenna installation necessitates skill and
experience, always consult your dealer before
installation. The antenna should be placed at a distance
from the power distribution wires. Otherwise, an electric
shock accident may occur if the antenna falls down.
Connecting the AM antenna
1 Connect the AM antenna cord to the [AM] and [HGND]
terminals.
2 Setup the antenna in the position and the direction to
be able to receive AM broadcast.
• The antenna supplied with the system is for indoor use.
Place it as far away as possible from the system, your
TV set, the speaker cords, AC adapter and the power
cord, and point it in the direction that provides the best
reception.
Connecting the speakers
1 Connect the right speaker to terminal marked “R”, with
the red wire to + and the black wire to –.
2 Connect the left speaker to terminal marked “L, with the
red wire to + and the black wire to –.
Insert this portion.
• For optimal sound performance, it is recommended to
use the supplied speakers.
• Do not connect more than one speaker to any one pair of
+/– speaker terminals.
¤ Caution for connection
• Do not plug the power cord into the power outlet until
all other connections are completed. Before unplugging
a connected cord or cable, be sure to switch the system
OFF and unplug the power cord from the power outlet in
advance.
Connecting the iPod adapter
• Connect an iPod adapter, which is provided with your
iPod or commercially available in iPod dealers, to the
iPod dock of this unit. Note that the iPod adapter is not
provided with this unit.
1 Insert the iPod adapter into
unit.
iPod dock
iPod adapter
2 Connect your iPod.
To remove the iPod adapter
• Insert a thin object such as the tip of a flat-blade
screwdriver into the slit on the dock adapter and lift it to
remove.
Connecting the HDMI terminal
1 When you use HDMI connection, you can change the
resolution (576p, 720p, 1080i, 1080p) for the HDMI output.
The HDMI will be outputted at 576p resolution, even if
you set the resolution to 576i on the HDMI connection.
• When the no sound or noisy sound are outputted with
HDMI connection, set the HDMI AUDIO in DVD SETUP
menu to PCM.
• If there is noise or lines on the screen, please check the
HDMI cable.
• Not all HDCP-compatible DVI devices will work with this
unit.
• If your HDMI TV does not support HDCP, the blue screen
appears on the screen.
• If the abnormal picture appears on the TV screen, turn off
the unit and then turn the unit on again.
FM
75Ω
iPod Dock
Remote control unit
RC-F0512E
Pull out the plastic protective
sheet before use.
DISPLAYSLEEP
USB/SD
DVD
STOP X-BASS
VOLUME
MUTE
D.AUDIO/iPod AUX SOUND
V.F.S
BAND
TUNER
AUDIO
SUBTITLE
DVD SETUP
RESOLUTION
STEREO/MONO
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
ANGLE
P.MODE
FOLDER
P.CALL
TIMER SET
ZOOM
RANDOM
MEMORY
REPEAT
TIMER
ON/OFF
FILE
SEARCH
PTY
CLEAR
BACKLIGHT
CONTRAST
REMOTE CONTROL UNIT
RC-F0512E
TOP MENU MENU
RETURN ON SCREEN
ENTER
VIDEO COMPONENT VIDEO
YCb Cr
¤ CAUTION
Be sure to adhere to the following, or proper
ventilation will be blocked causing damage or  re
hazard (Main unit and AC adapter).
• Do not place a cloth on the system or place it on a
carpet or cushion.
• Do not use the system in a poorly ventilated place.
• Do not place any objects impairing heat radiation
onto the top of the unit.
• Leave some space around the unit (from the largest
outside dimension including projection) equal to or
greater than, shown below.
Top panel : 50 cm
¤ CAUTION
The power in this equipment will not be completely
cut off from the wall outlet when the standby switch is
turned off.
Install the equipment so that the wall outlet is easily
accessible and, in case of emergency, immediately
unplug the power plug from the wall outlet.
Mains plug is used as the disconnect device, It shall
remain readily operable and should not be obstructed
during intended use.
AM loop antenna
FM indoor antenna
iPod dock
Right speaker Left speaker
To AC wall outlet
Insert the plug firmly
all the way into the
AC wall outlet.
To TV with video input
terminal
Video cord
Component Video
cord
Component Video cord
Video cord
HDMI cord
Power cord
AC adapter
Use the AC adapter (AC-18335A)
provided with this product.
Connect the audio
output of the VCR, etc.
to the [AUX IN] terminals
on the rear of the main
unit.
Connect a subwoofer (SW-40HT
(separately available), etc.) to the
[SUB WOOFER PRE OUT] terminal
on the rear of the main unit.
Standby mode
While the STANDBY/TIMER indicator is lit, a small
amount of power is supplied to the system to back up
the memory. This is called standby mode. Under the
condition, the system can be turned ON by the remote
control unit.
Clock setting
The time of the day of the system can be set.
TIMER SET
ENTER
MULTI CONTROL
5/ / 2/ 3
DISPLAYSLEEP
USB/SD
DVD
STOP X-BASS
VOLUME
MUTE
D.AUDIO/iPod AUX SOUND
V.F.S
BAND
TUNER
AUDIO
SUBTITLE
DVD SETUP
RESOLUTION
STEREO/MONO
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
ANGLE
P.MODE
FOLDER
P.CALL
TIMER SET
ZOOM
RANDOM
MEMORY
REPEAT
TIMER
ON/OFF
FILE
SEARCH
PTY
CLEAR
BACKLIGHT
CONTRAST
REMOTE CONTROL UNIT
RC-F0512E
TOP MENU MENU
RETURN ON SCREEN
ENTER
1 Press TIMER SET button.
2 Press MULTI CONTROL 2 or 3 button to
select “CLOCK” and press ENTER button.
“CLOCK SETTING” appears on the display.
3 Press ENTER button.
The hour indication will start fl ashing.
4 Press MULTI CONTROL 5 or button to
set the hours and press ENTER button.
The minute indication starts fl ashing.
5 Press MULTI CONTROL 5 or button to
set the minutes and press ENTER button.
When the setting completes, “COMPLETE” is
displayed and the unit exits the setup mode
automatically.
• The clock setting will be erased when the power cord is
disconnected or a power failure occurred.
• The MULTI CONTROL 2 or 3 button can be used to
move across the setting items.
Setup Operation
DISPLAYSLEEP
USB/SD
DVD
STOP X-BASS
VOLUME
MUTE
D.AUDIO/iPod AUX SOUND
V.F. S
BAND
TUNER
AUDIO
SUBTITLE
DVD SETUP
RESOLUTION
STEREO/MONO
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
ANGLE
P.MODE
FOLDER
P.CALL
TIMER SET
ZOOM
RANDOM
MEMORY
REPEAT
TIMER
ON/OFF
FILE
SEARCH
PTY
CLEAR
BACKLIGHT
CONTRAST
REMOTE CONTROL UNIT
RC-F0512E
TOP MENU MENU
RETURN ON SCREEN
ENTER
1
2
34
12 3 4
1 Turn the system on.
Press button.
Turn the system ON (OFF). Pressing button while
the system is ON switches it OFF (standby mode).
2 Press the selector button once
or more to select of the desired
audio source.
∙ TUNER BAND button:
FM AM
∙ DVD/USB/SD button:
DVD USB SD
∙ D.AUDIO/iPod button:
D.AUDIO iPod
∙ AUX button: AUX
DVD
1 Press 0 button to open the DVD door.
2 Insert a disc into the disc loader with the
label side is facing you.
3 Press 0 button to close the DVD door.
For a DVD, playback starts automatically.
For a CD, the total playtime and total number of
tracks will appear in the display.
For an audio fi le-CD, the total album number and
total fi le number will appear on the display.
AUX (external component)
An external component can be connected to AUX IN of this unit
and played back.
USB device
Insert a USB device to the USB connector on
the front panel.
“USB” is displayed. The total album number and
total fi le number will appear on the display.
SD card
Insert the SD card into the SD card slot until
it clicks.
Insert the SD card so that the label side
faces up and the side with a cut comes on
the right.
The total album number and total fi le number will
appear on the display.
RADIO
Auto preset radio station
Radio stations can be preset automatically in preset channels.
1 Press TUNER BAND button to select the
desired waveband: FM or AM.
2 Press MEMORY/REPEAT button for more
than 2 seconds.
The receivable radio stations are preset
automatically. When the Auto preset operation has
completed, the unit enters the condition in which
preset station P01 is tuned.
Tuning to a preset radio station
Press FOLDER/P.CALL 5 or button.
D.AUDIO
Playback of Digital Audio Player
Kenwood digital audio player can be connected to play audio
les in it.
Optional cable
Kenwood digital
audio player
1 Connect an the player.
2
Turn the connected player ON and start
playing it.
iPod
Connect an iPod to the iPod dock.
3 Start playback.
Press 38 button.
To stop playback of DVD/USB device/
SD card/D.AUDIO...
Press STOP7 button.
To select a track/  le/ song...
Press 4 or ¢ button.
4 Adjust using VOLUME.
5 Increasing the volume level
Decreasing the volume level
VOLUME
VOLUME
Muting the sound temporarily...
Press MUTE button.
To cancel muting...
Press MUTE button again (this resumes
the original volume) or adjust the volume.
Removing a disc
1 Press 0 button and carefully pull it out.
2 Press 0 button to close the DVD door.
Removing the USB device/SD card/D.AUDIO/
iPod
1 Press the button to select standby
mode.
2 Remove the USB device/SD card/D.AUDIO/
iPod.
FOLDER
P.CALL 5/
MEMORY
REPEAT
MUTE
Headphones
To listen to your stereo with
headphones (separately available), use
the 3.5 mm phones jack on the main
unit. Connecting headphones mutes
the sound from the speakers.
PAIRING
  • Page 1 1
  • Page 2 2

Kenwood C-616DV Quick start guide

Type
Quick start guide

Kenwood C-616DV is a Compact Hi-Fi Component System that allows you to enjoy music from various sources, including DVD, USB, SD card, D.AUDIO, iPod, and external components connected to AUX IN. With its AM/FM tuner, you can listen to your favorite radio stations. The system features HDMI and component video outputs for connecting to your TV, enabling you to watch DVDs and other video content. You can also connect headphones to the 3.5mm jack for private listening. The C-616DV supports various playback functions such as repeat, random, and angle adjustment for DVDs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI