PIXIE DD1149H No Bull Blinds Wireless Emitter Operating instructions

Brand
PIXIE
Model
DD1149H No Bull Blinds Wireless Emitter
Type
Operating instructions
24V+
12V+
DC-
SET
STOP
N
Working temperature：-10℃~50℃
Quiescent current: 2uA
Voltage: DC 12V / 24V Radio frequency: 433.925MHz
Working current: 25mA Radio range: 150 meters outdoor, 35 meters indoor
Technical specification
1, Emitter couldn't expose to moisture or be striked heavily, or else the emitter life will be affected;
2, Under uni-directional mode, if you press any button more than 20S, while under bi-directional mode, you press
any button 5S, the emitter will stop sending radio signals.
Warning
DD1149H
Emitter Instruction
Version: A/02
Bi-directional mode
Uni-directional mode
LED flashes once
LED flashes twice
Hold SET and power on
Power off
24V+
12V+
DC-
SET
STOP
N
Uni-directional / Bi-directional Mode Switch
Note: The factory default mode is Bi-directional mode, repeat the same operation to switch the mode circulary.
Note: 1,The factory default is unlock status, repeat same operation to switch status circulaly. 2,When the combination buttons
are locked, if you press the combination buttons, the emitter won't send any signal and LED won't flash. 3,Only the transmitting
code will be affected if the combination buttons are locked.
24V+
12V+
DC-
SET
STOP
N
24V Input positive
12V Input positive
Output negative
Stop line
Down line
Up line
Public line
Setting button
Product Features
Combination Button Lock / Unlock Operation
LED always
on
Press and hold STOP
button (N+STOP)
more than 15s
24V+
12V+
DC-
SET
STOP
N
24V+
12V+
DC-
SET
STOP
N
SET×1
T≤10s
LED flashes
slowly 3 times
LED flashes
quickly 10 times
Lock status
Unlock status
1, Electronic switch mode
2, Mechanical switch mode
3, Dual pushbutton switch mode
<
<
Motor up Motor stop Motor down
Com line connects
Up line
Com line connects
Down line
Com line connects
Stop line
Com
Up
Stop
Down Com
Up
Stop
Down Com
Up
Stop
Down
Motor up Motor stop Motor down
Com line connects
Up line
Com line connects
Down line
Com line disconnect to
Up and Down line
Com
Up
Down Com
Up
Down Com
Up
Down
Motor down
Com line connects
Down line
Com
Up
Down
Motor stop
Com line disconnects
Down line
Com
Up
Down
Motor up Motor stop
Com line connects
Up line
Com line disconnects
Up line
Com
Up
Down Com
Up
Down
24V+
12V+
DC-
SET
STOP
N
SET×6s
Note: The operation can be under any mode. If under rocker switch mode or dual pushbutton switch mode, only pairing
emitter works.
1, Electronic switch mode
LED flashes once
Switch to pulse switch mode
24V+
12V+
DC-
SET
STOP
N
SET×12s LED flashes twice
then off
Switch to rocker switch mode
24V+
12V+
DC-
SET
STOP
N
SET×20s LED flashes 3 times
and then off
Switch to biased switch mode
2, Mechanical switch mode
3, Dual pushbutton switch mode
External Switch Mode
External Switch Schematic Program
  • Page 1 1
  • Page 2 2

PIXIE DD1149H No Bull Blinds Wireless Emitter Operating instructions

Brand
PIXIE
Model
DD1149H No Bull Blinds Wireless Emitter
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents