Grizzly G0838 is a variable-speed wood lathe with a 16" swing over the bed and a 24" distance between centers. Its 2 HP, 3-phase main motor provides plenty of power for turning large and small projects alike. The lathe's variable speed range of 100-2900 RPM allows you to find the ideal speed for any project, from delicate spindle work to heavy-duty turning. The G0838 also features a sturdy cast iron bed, frame, and stand, ensuring stability and vibration-free operation.
Grizzly G0838 is a variable-speed wood lathe with a 16" swing over the bed and a 24" distance between centers. Its 2 HP, 3-phase main motor provides plenty of power for turning large and small projects alike. The lathe's variable speed range of 100-2900 RPM allows you to find the ideal speed for any project, from delicate spindle work to heavy-duty turning. The G0838 also features a sturdy cast iron bed, frame, and stand, ensuring stability and vibration-free operation.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2
Model G0838
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0838 16" X 24" VARIABLE‐SPEED WOOD LATHE
Product Dimensions:
Weight.............................................................................................................................................................. 322 lbs.
Width (side-to-side) x Depth (front-to-back) x Height...............................................................60-1/2 x 23-1/2 x 48 in.
Footprint (Length x Width)..................................................................................................................... 42-1/2 x 16 in.
Shipping Dimensions:
Type.......................................................................................................................................................... Wood Crate
Content........................................................................................................................................................... Machine
Weight.............................................................................................................................................................. 388 lbs.
Length x Width x Height....................................................................................................................... 45 x 23 x 21 in.
Electrical:
Power Requirement............................................................................................................ 220V, Single-Phase, 60Hz
Full-Load Current Rating........................................................................................................................................ 12A
Minimum Circuit Size..............................................................................................................................................15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length.................................................................................................................................................6 ft.
Power Cord Gauge......................................................................................................................................... 14 AWG
Plug Included..........................................................................................................................................................Yes
Included Plug Type.................................................................................................................................... NEMA 6-15
Switch Type.......................................................................................................ON/OFF Push Button w/Safety Cover
Inverter (VFD) Type................................................................................................................................. Delta VFD-M
Inverter (VFD) Size............................................................................................................................................... 2 HP
Motors:
Main
Horsepower................................................................................................................................................ 2 HP
Phase.................................................................................................................................................... 3-Phase
Amps........................................................................................................................................................... 5.6A
Speed................................................................................................................................................ 1720 RPM
Type...........................................................................................................................................TEFC Induction
Power Transfer .................................................................................................................................. Belt Drive
Bearings........................................................................................................ Sealed & Permanently Lubricated
Centrifugal Switch/Contacts Type................................................................................................................ N/A
Main Specifications:
Operation Information
Swing Over Bed......................................................................................................................................... 16 in.
Swing Over Tool Rest Base................................................................................................................ 11-1/2 in.
Distance Between Centers........................................................................................................................ 24 in.
Max. Distance Tool Rest to Spindle Center...........................................................................................8-1/8 in.
No of Spindle Speeds............................................................................................................................Variable
Spindle Speed Range............................................................................Low: 100–1300, High: 150–2900 RPM
Floor to Center Height....................................................................................................................... 43-5/16 in.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2
Model G0838
Spindle Information
Spindle Taper............................................................................................................................................ MT#2
Spindle Thread Size............................................................................................................................1" x 8 TPI
Spindle Thread Direction............................................................................................................................Right
Spindle Bore............................................................................................................................................. 3/8 in.
Type of Included Spindle Center.................................................................................................................Spur
Indexed Spindle Increments............................................................................................................. 10, 30 deg.
No of Indexes................................................................................................................................................. 12
Outboard Spindle Thread Direction.................................................................................................. Right Hand
Outboard Spindle Size.................................................................................................................................M18
Outboard Spindle TPI.................................................................................................................................... 1.5
Tool Rest Information
Tool Rest Width......................................................................................................................................... 12 in.
Tool Rest Post Diameter..............................................................................................................................1 in.
Tool Rest Post Length........................................................................................................................... 2-1/8 in.
Tool Rest Base Height...........................................................................................................................2-1/4 in.
Tailstock Information
Tailstock Taper.......................................................................................................................................... MT#2
Type of Included Tailstock Center............................................................................................................... Live
Construction
Bed.......................................................................................................................................................Cast Iron
Frame...................................................................................................................................................Cast Iron
Stand....................................................................................................................................................Cast Iron
Base..................................................................................................................................................... Cast Iron
Headstock............................................................................................................................................ Cast Iron
Tailstock............................................................................................................................................... Cast Iron
Paint Type/Finish....................................................................................................................................Enamel
Other Related Information
Bed Width.................................................................................................................................................... 6 in.
Faceplate Size............................................................................................................................................. 6 in.
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Serial Number Location .................................................................................................................................. ID Label
ISO 9001 Factory .................................................................................................................................................. Yes
Features:
Digital Spindle Speed Indicator
Spindle Low-Speed Range 100–1300 RPM
Spindle High-Speed Range 150–2900 RPM
Forward and Reverse Turning
Cam Lock Adjustments for Fast and Easy Changes
Accessories Included:
6" Faceplate
Live Center
Spur Center
Tool Holder
Indexing Pin
Knock-Out Tool
-
1
-
2
Grizzly G0838 is a variable-speed wood lathe with a 16" swing over the bed and a 24" distance between centers. Its 2 HP, 3-phase main motor provides plenty of power for turning large and small projects alike. The lathe's variable speed range of 100-2900 RPM allows you to find the ideal speed for any project, from delicate spindle work to heavy-duty turning. The G0838 also features a sturdy cast iron bed, frame, and stand, ensuring stability and vibration-free operation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
