2. Grizzly
  3. G0838
G0838

Grizzly G0838 Owner's manual

  • I've reviewed the datasheet for the Grizzly G0838 wood lathe. This document provides detailed information on the lathe's specifications, dimensions, electrical requirements, and key features like variable spindle speeds and included accessories such as the faceplate and centers. I am ready to answer your questions about this machine.
  • What is the power requirement for this lathe?
    What is the spindle speed range?
    What is included with the lathe?
    What type of motor does this lathe have?
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2
Model G0838
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0838 16" X 24" VARIABLE‐SPEED WOOD LATHE
Product Dimensions:
Weight.............................................................................................................................................................. 322 lbs.
Width (side-to-side) x Depth (front-to-back) x Height...............................................................60-1/2 x 23-1/2 x 48 in.
Footprint (Length x Width)..................................................................................................................... 42-1/2 x 16 in.
Shipping Dimensions:
Type.......................................................................................................................................................... Wood Crate
Content........................................................................................................................................................... Machine
Weight.............................................................................................................................................................. 388 lbs.
Length x Width x Height....................................................................................................................... 45 x 23 x 21 in.
Electrical:
Power Requirement............................................................................................................ 220V, Single-Phase, 60Hz
Full-Load Current Rating........................................................................................................................................ 12A
Minimum Circuit Size..............................................................................................................................................15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length.................................................................................................................................................6 ft.
Power Cord Gauge......................................................................................................................................... 14 AWG
Plug Included..........................................................................................................................................................Yes
Included Plug Type.................................................................................................................................... NEMA 6-15
Switch Type.......................................................................................................ON/OFF Push Button w/Safety Cover
Inverter (VFD) Type................................................................................................................................. Delta VFD-M
Inverter (VFD) Size............................................................................................................................................... 2 HP
Motors:
Main
Horsepower................................................................................................................................................ 2 HP
Phase.................................................................................................................................................... 3-Phase
Amps........................................................................................................................................................... 5.6A
Speed................................................................................................................................................ 1720 RPM
Type...........................................................................................................................................TEFC Induction
Power Transfer .................................................................................................................................. Belt Drive
Bearings........................................................................................................ Sealed & Permanently Lubricated
Centrifugal Switch/Contacts Type................................................................................................................ N/A
Main Specifications:
Operation Information
Swing Over Bed......................................................................................................................................... 16 in.
Swing Over Tool Rest Base................................................................................................................ 11-1/2 in.
Distance Between Centers........................................................................................................................ 24 in.
Max. Distance Tool Rest to Spindle Center...........................................................................................8-1/8 in.
No of Spindle Speeds............................................................................................................................Variable
Spindle Speed Range............................................................................Low: 100–1300, High: 150–2900 RPM
Floor to Center Height....................................................................................................................... 43-5/16 in.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2
Model G0838
Spindle Information
Spindle Taper............................................................................................................................................ MT#2
Spindle Thread Size............................................................................................................................1" x 8 TPI
Spindle Thread Direction............................................................................................................................Right
Spindle Bore............................................................................................................................................. 3/8 in.
Type of Included Spindle Center.................................................................................................................Spur
Indexed Spindle Increments............................................................................................................. 10, 30 deg.
No of Indexes................................................................................................................................................. 12
Outboard Spindle Thread Direction.................................................................................................. Right Hand
Outboard Spindle Size.................................................................................................................................M18
Outboard Spindle TPI.................................................................................................................................... 1.5
Tool Rest Information
Tool Rest Width......................................................................................................................................... 12 in.
Tool Rest Post Diameter..............................................................................................................................1 in.
Tool Rest Post Length........................................................................................................................... 2-1/8 in.
Tool Rest Base Height...........................................................................................................................2-1/4 in.
Tailstock Information
Tailstock Taper.......................................................................................................................................... MT#2
Type of Included Tailstock Center............................................................................................................... Live
Construction
Bed.......................................................................................................................................................Cast Iron
Frame...................................................................................................................................................Cast Iron
Stand....................................................................................................................................................Cast Iron
Base..................................................................................................................................................... Cast Iron
Headstock............................................................................................................................................ Cast Iron
Tailstock............................................................................................................................................... Cast Iron
Paint Type/Finish....................................................................................................................................Enamel
Other Related Information
Bed Width.................................................................................................................................................... 6 in.
Faceplate Size............................................................................................................................................. 6 in.
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Serial Number Location .................................................................................................................................. ID Label
ISO 9001 Factory .................................................................................................................................................. Yes
Features:
Digital Spindle Speed Indicator
Spindle Low-Speed Range 100–1300 RPM
Spindle High-Speed Range 150–2900 RPM
Forward and Reverse Turning
Cam Lock Adjustments for Fast and Easy Changes
Accessories Included:
6" Faceplate
Live Center
Spur Center
Tool Holder
Indexing Pin
Knock-Out Tool
/