Casablanca 59153 User manual

Brand: Casablanca

Model: 59153

Type: User manual

www.CasablancaFanCo.com

1.888.227.2178

PAGE

30 inches

7 feet

PAGE

What to Expect with

Your Installation

Ceiling Bracket

Ladder

PAGE

Tools Needed

Canopy

Maintenance

& Cleaning

Troubleshooting

Table of Contents

PAGE

Blades Switch Housing Light Kit Operation

PAGE

Mounting Options

PAGE

WiringDownrod

PAGE

Preparation

PAGE

Wall Control

M8522-01 • 06/13/14 • © Casablanca Fan Company

Congratulations on purchasing

your new Casablanca® ceiling

fan! It will provide comfort

and performance in your home

or ofce for many years. This

installation and operation

manual contains complete

instructions for installing and

operating your fan.

We are proud of our work and

appreciate the opportunity

to supply you with the best

ceiling fan available anywhere

in the world.

To register your fan, please visit:

www.CasablancaFanCo.com/register

Save your receipt for proof of purchase.

www.CasablancaFanCo.com

1.888.227.2178

M8522-01 • 06/13/14 • © Casablanca Fan Company

www.CasablancaFanCo.com

1.888.227.21781.888.227.2178

What to Expect with Your Installation

Know your wiring

If you are unfamiliar

with wiring, use a

qualied electrician.

You may need a

friend to help you.

Check box to see

fan weight

Assess location

30 inches

from blade tip to

nearest wall or

obstruction

7 feet

from bottom

edge of blade

to the oor

Select a downrod length

Assess ceiling angle

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

CAUTIONS

Must be able to

secure the fan to

building structure or

fan-rated outlet box

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

w.1 - To reduce the risk of re, electrical shock, or personal

injury, mount fan directly from building structure and/or an

outlet box marked acceptable for fan support of 70 lbs (31.8 kg)

and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or

servicing your fan, disconnect the power by turning off the

circuit breakers to the outlet box and associated wall switch

location. If you cannot lock the circuit breakers in the off

position, securely fasten a prominent warning device, such as a

tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage,

use only Casablanca Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade

brackets when installing the blade brackets, balancing the blades,

or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

c.1 - All wiring must be in accordance with national and local

electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring,

use a qualied electrician.

c.2 - Use only Casablanca replacement parts.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and if not

installed and used in accordance with the instructions may cause

harmful interference to radio communications.

Ceiling angles greater

than 34° will require an

Angled Mounting Kit.

See page 4 for details.

www.CasablancaFanCo.com

1.888.227.2178

Tools Needed

Ladder

Power Drill

(optional)

9/64” Drill Bit

(optional)

Screwdrivers

Pliers Wire Strippers

If mounting to a support structure, you will also need these tools.

M8522-01 • 06/13/14 • © Casablanca Fan Company

www.CasablancaFanCo.com

1.888.227.2178

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will

also need an Angled Mounting Kit (sold separately).

Guide Touches

BOTH Ceiling & Wall

Guide Touches

Wall

but

NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

You need ONLY

a Longer

Downrod

*most common

If you have a at ceiling:

Hang your fan by a standard downrod (included).

Mounting Options

Support

Structure

Ceiling

Outlet Box

(required)

Angled

Mounting

Style

Standard

Mounting

Style

Support

Structure

Ceiling

Outlet Box

(required)

Use Standard Mounting

or Low-Prole Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

CEILING

WALL

OPTION

Standard

Mounting

OPTION

Angled

Mounting

2 3

SLIDE

toward ceiling

PLACE

against wall

FOLD

on dotted line

34°

Use the three steps below to determine if your ceiling angle is greater than 34°

1.888.227.2178

M8522-01 • 06/13/14 • © Casablanca Fan Company

1.888.227.2178

www.CasablancaFanCo.com

Ceiling Bracket

Refer to warning w.1 on pg. 2

To avoid possible electrical shock, before

installing your fan, disconnect the power by

turning off the circuit breakers to the outlet

box associated with the wall switch location.

For angled ceilings, point

opening toward peak.

If you are unable to do this,

call Technical Support at

1-888-277-2178.

Make sure all four bumpers are

still attached.

Use wood screws

(included) when securing

to support structure with

approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid

in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

OFF

Turn Power

M8522-01 • 06/13/14 • © Casablanca Fan Company

www.CasablancaFanCo.com

1.888.227.2178

Preparation

1.888.227.2178

Remove the shipping blocks from the

motor. Save the screws. They will be

needed for blade iron installation.

Note: Some fans will have a shipping

ring instead of shipping blocks. Please

remove the ring and save the screws.

Time Saver Tip: Get a helper

to insert grommets, found in

the hardware bag, into the

blades while you’re doing the

next couple of steps.

If you are installing multiple remote-controlled

fans on the same circuit breaker,

you may need to perform a few extra steps to

prevent interference or faulty operation of your

remote controls.

Go to www.CasablancaFanCo.com/FAQs and click

“How do I properly install multiple remote-

controlled fans?” for more information.

M8522-01 • 06/13/14 • © Casablanca Fan Company

1.888.227.2178

Downrod

Slide

1 2 3 4 5

678910

Sold Separately

Included

Longer

Downrod

for angled

ceilings or

ceilings 10’ or

higher

Shorter

Downrod

for fans installed

close to ceiling

Standard

Downrod

for ceilings 8-10’ high

Option 1Option 2

Option 3

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

Steps 6-10 to reassemble with new pipe

Included

(pre-assembled)

www.CasablancaFanCo.com

M8522-01 • 06/13/14 • © Casablanca Fan Company

KEEP!

8”

3/8”

(not to scale)

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Downrod (continued)

8”

3/8”

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

If the setscrew is not tightened

securely, the fan may fall.

1.888.227.2178

www.CasablancaFanCo.com

M8522-01 • 06/13/14 • © Casablanca Fan Company

www.CasablancaFanCo.com

1.888.227.2178

M8522-01 • 06/13/14 • © Casablanca Fan Company

Downrod (continued)

Put the wires and downrod through the canopy.

Let the canopy sit loosely on top of the fan.

DO NOT PICK THE FAN UP BY THE

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

www.CasablancaFanCo.com

1.888.227.2178

Wiring

Using an orange wire

connector from

the hardware bag,

connect the three

grounding wires

(green, green/yellow

stripe, or bare copper)

coming from the ceiling,

downrod, and hanging

bracket.

green/yellow stripe

(grounding)

green/yellow stripe

white

black

blue

white (common out)

black (fan out)

blue (light out)

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Note: To connect the wires,

hold the bare metal leads

together and place a wire

connector over them, then twist

clockwise until tight.

Using the blue wire

connectors from the remote

control hardware bag,

connect the white wire

from the receiver (marked

“common out”) to the white

wire from fan. Connect the

black wire from the receiver

(marked “fan out”) to the

black wire from the fan.

Connect the blue wire from

the receiver (marked ”light

out”) to the blue wire from

the fan. The red wire from

the receiver will not be used,

it has a pre-installed wire

terminator.

Refer to CAUTION c.1 on pg. 2

Using an orange wire

connector from

the hardware bag,

connect the black wire

(ungrounded) from the

ceiling to the black wire

from the receiver (marked

“live in”). Connect the

white wire (grounded)

from the ceiling to

the white wire from

the receiver (marked

“neutral in” or

“common in”).

black (ungrounded)

white (grounded) white (neutral in)

black (live in)

M8522-01 • 06/13/14 • © Casablanca Fan Company

www.CasablancaFanCo.com

1.888.227.2178

1. Using a 9/64 drill bit, drill a hole

in each screw cut-out on the wall

control template.

2. Using a hammer, tap a drywall

anchor found in the wall control

hardware bag into each hole

until the drywall anchor is ush

with the wall.

1. Using a drywall punch saw,

cut out the interior shape of

the template using one of

the four drilled corners as a

starting point.

2. Remove the template and the

cut-out section of drywall.

1. Insert the wall control into the

dry wall cut out.

2. Align the screw holes in the wall

control with the drywall anchors.

3. Install the cover plate using

a Phillips Head screwdriver

to secure the two cover plate

screws found in the wall control

hardware bag through the wall

control and into the drywall

anchors.

Wall Control

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

If you are using a outlet box for wall control installation, the wires coming from the wall

control must be grounded using the attached green wire. If not placed in an outlet box, cap

the green wire coming from the wall control with an included wire nut.

1. Tape the provided wall control

template with painter’s tape at

the desired installation area.

2. Drill holes inside the four

corners of the template.

Note: Make sure the wall

control template is level before

proceeding to the next step.

Template

Drywall

Before

After

Cover Plate

Template

Drill Holes

Painter’s

Tape

Template

Drywall

Anchors

Screw

Cut-Out

M8522-01 • 06/13/14 • © Casablanca Fan Company

www.CasablancaFanCo.com

1.888.227.2178

M8522-01 • 06/13/14 • © Casablanca Fan Company

Canopy

Note: Fan style may vary.

Lift the canopy into place so that

the screw holes are aligned.

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Screw

Holes

Insert the two canopy screws

found in the hardware bag.

www.CasablancaFanCo.com

1.888.227.2178

M8522-01 • 06/13/14 • © Casablanca Fan Company

Blades

Insert grommets found in the hardware

bag into the holes in the blades, then

secure each blade to a blade iron with

screws found in the hardware bag.

Remember the screws that

you kept after removing the

shipping blocks (page 6)? You

need them for this step.

Lightly attach the blade irons to the

motor with the blade iron armature

screws, then securely tighten after both

screws are attached.

www.CasablancaFanCo.com

1.888.227.2178

Switch Housing

Make sure the upper switch housing is securely

attached to the mounting plate. Failure to properly

secure all 3 assembly screws could result in the switch

housing xture falling.

Feed the wire plug through the center

hole of the upper switch housing, then

wrap keyhole slots around the screws and

twist counterclockwise.

Screw two housing assembly screws

from the hardware bag halfway into

the motor housing. It does not matter

which two screw holes you choose.

Insert the third screw, found in

the hardware bag, into place and then

tighten all three screws.

M8522-01 • 06/13/14 • © Casablanca Fan Company

www.CasablancaFanCo.com

1.888.227.2178

Light Kit

Connect the plugs from the upper and

lower switch housings. Make sure to line up

the colored markings on the connectors.

Lift the lower switch housing up and align

the screw holes in the upper and lower

switch housings.

To install each shade, remove the socket

ring from the socket. Insert the shade

onto the socket and install the socket

ring. Tighten each socket ring by turning

clockwise with the socket ring tool.

Shade

Socket

Socket Ring

Socket

Ring Tool

Want to install your fan without a light kit?

Go to www.CasablancaFanCo.com/FAQs and click

“How do I install my fan without the light kit?”

Note: In compliance with US federal energy regulations, this ceiling

fan contains a device that restricts its light output. Exceeding the

wattage limit marked on the MAX wattage sticker afxed to the

light socket(s) may result in re hazard or improper operation.

www.CasablancaFanCo.com

1.888.227.2178

Light Kit (continued)

Make sure the lower switch housing is securely attached to

the upper switch housing. Failure to properly secure all 3

assembly screws could result in the light xture falling.

Install the three switch housing

screws, found in the hardware

bag. Tighten all three screws securely.

CONGRATULATIONS!

YOU’RE DONE!

Install a bulb into each of the sockets.

When necessary, replace with bulbs of

the same type and wattage.

See next page for fan

operation instructions.

www.CasablancaFanCo.com

1.888.227.2178

Operation

Fan

Power

Before operating the wall control, press on the

battery door to eject it. Unscrew the battery

holder. Insert the battery, found in the control

hardware bag, with the positive (+) side facing

downward. Reinstall the battery holder and

reinsert the battery door into the wall control.

Battery

Holder

Battery

Door

Turn Power

Note: The remote must be paired before

the fan will operate.

Within 3 minutes of restoring power to the

fan, press both the Fan Off button and the

4 button for at least four seconds. Your fan

will turn on at the lowest speed to indicate

successful syncing. If it does not, turn off

power to your fan, wait one minute then try

again. If using the transmitter with multiple

fans, repeat this process for each fan.

If you are installing multiple remote-controlled fans on

the same circuit breaker, you may need to perform a few

extra steps to prevent interference or faulty operation of

your remote controls.

Go to www.CasablancaFanCo.com/FAQs and click

“How do I properly install multiple remote-controlled fans?”

for more information.

www.CasablancaFanCo.com

1.888.227.2178

Operation (continued)

Quickly press the up or down arrow

to turn the lights off and on. Hold

the up or down arrow to raise or

dim the light level. The reverse

button changes the direction that

the blades turn. The power button

turns the fan off and on.

Lights

Down

Fan

Speed

Reverse

Battery

Holder

Fan

Power

Lights

Fan

Speed

(Low)

(High)

The reverse button on the wall

control changes the air ow

pattern. In warm weather, use

(a) downward air ow pattern.

In cold weather, use (b) upward

air ow pattern.

(a)

(b)

Reverse

Button

• Press the fan power button

off for at least three seconds to

initiate the Safe-Exit Mode.

• The lights will ash for visual

conrmation.

• The lights will stay on 50%

brightness for 20 seconds and

then begin to dim. After a total

of 30 seconds, the lights will be

completely off.

The Safe-Exit Program gives

you about thirty seconds of

light when you turn the lights

off to exit the room before the

lights go out. To use Safe-Exit:

www.CasablancaFanCo.com

1.888.227.2178

Maintenance & Cleaning

For cleaning the fan, use soft brushes or

cloths to prevent scratching. Cleaning

products may damage the nishes.

Be sure to turn off

power to the fan

before performing

any maintenance or

relamping.

OFF

Turn Power

For questions regarding removing a light kit, call

customer service 1-888-227-2178.

www.CasablancaFanCo.com

1.888.227.2178

Troubleshooting

Excessive wobbling

• Tighten all of the blade and

blade iron screws until they

are snug.

• Turn the power off, support

the fan carefully, and check

that the hanger ball is

properly seated.

• Use the provided balancing

kit and instructions to balance

the fan.

Noisy Operation

• Tighten the blade and blade

iron screws until they are snug.

• Check to see if any of the

blades are cracked. If so, replace

all of the blades.

Fan doesn’t work

• Make sure power switch is on.

• Press a fan speed button (1-4).

• Check the wall control battery.

• Make sure that you have paired

the wall control.

• Check the circuit breaker to

ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit

breaker, then loosen the canopy

and check all the connections

according to the wiring diagram

on page 10.

• Check the plug connection in

the switch housing.

Lights dim when turned on or

do not turn on at all.

• Make sure the wattage of the

light bulbs installed matches

the specications on the light

sockets.

Remote doesn’t work

• Install a fresh battery in the wall

control.

• Make sure you have paired the

remote.

AUTHORIZED SERVICE

CENTERS

For the most updated list of

Casablanca Authorized Service

Centers, visit

www.CasablancaFanCo.com or

call toll free 1-888-227-2178.

If you have multiple remotes or

multiple remote-controlled fans

installed on the same circuit

breaker and you are experiencing

interference or faulty operation of

your remote controls, please go to

www.CasablancaFanCo.com/FAQs

and click “How do I properly install

multiple remote-controlled fans?”

for information on how to correct

this issue.

Casablanca 59153 User manual

Casablanca 59153 User manual

Casablanca 59153 User manual

Related papers

Other documents