IP Adress Unit
iCall 220 IP—OiD
IP address unit with call button and iButton reader
- Communication with Healthcare software and
medical file via TCP/IP
- Communication with Netrix message server via TCP/
IP
- Communication with Novilog via UDP/IP or TCP/IP
- On-board memory
- FTP server present
- Web server present
- Telnet server present
- Remote diagnostics/Automatic error reporting
- Programming via web server or Client interface
- Password protected
- Time synchronization via NTP server
- Interactive 2-way communication
- Identification of nursing staff via iButton
- Connections included for integration with standard
switching material (existing or iCall 4xx)
- Specific flush mount box available
- Can be flush mounted in standard flush mount box.
(surface mount frame available)
- Power supply via LAN cabling or separate power
supply
- Following the German VDE 834-1, VDE 834-2 and CE
standard
- Local bus connection included for iCall 3xx
- 4 softkey buttons with variable functions
(according to the place in the menu)
- Red call button
- Assistance call through red call button when
present
- Cancel /identification via iButton
- Display :
- Menu-driven, illuminated display
with 8 lines
- Entering tasks (from medical file) from room
display
- Night mode with soft illuminated display
- Flat design
- Grey values available to place emphasis
in screen
Power supply: min: 16V - max: 30V
Power consumption (24v): standby: 62mA -
max: 85 mA
Order information
Description
Without GIRA 55 frame
Data sheet version
Electrical specifications
CON1 Localbus
1. +24V
2. GND
3. TX
4. RX
CON2 Ethernet
1. TX+ (white/orange)
2. TX- (orange)
3. RX+ (white/green)
4. RX- (green)
CON3 iButton
1. 1W (white)
2. GND (grey)
3. Led G (green)
4. Led R (red)
5. GND (yellow)
CON5 exits
1. +24V
2. Call
3. Cancellation
4. Bathroom
5. GND
CON4 Entrances
1. Call
2. Bathroom
3. Emergency
4. Door
5. +24V
Part N°
NWAAES1000
DSII 220-E-01-12
/
