Lumi 104151 User manual

104151
Brand
Lumi
Model
104151
Type
User manual

Lumi 104151 is a security light with a built-in infrared detector that can automatically switch on when it detects movement or when natural light becomes dark. It features a manual override function, adjustable detection brightness (3-2000LUX), and detection duration (10 seconds to 7 minutes). The detection range is up to 12 meters, and the installation height is recommended to be between 1.8 and 2.5 meters.

Lumi 104151 is a security light with a built-in infrared detector that can automatically switch on when it detects movement or when natural light becomes dark. It features a manual override function, adjustable detection brightness (3-2000LUX), and detection duration (10 seconds to 7 minutes). The detection range is up to 12 meters, and the installation height is recommended to be between 1.8 and 2.5 meters.

INSTRUCTION MANUAL
SPECIFICATION
230mm 180mm
160mm
Item: 104151, 104246, 104271,
104152
Input voltage: AC220-240V
Wattage: 26W (13W per head) COB
Manual override function
Installation height: 1.8-2.5m
Color: Black / Silver
INSTALLATION ADVICE
•Always switch o mains supply before installation.
•It is recommended that luminaires are installed and fitted by a qualified electrician
ensuring the installation complies to the current building regulations and AS.NZS 3000.
•These products are designed for connection to a 220-240V 50Hz supply.
•Any broken or damaged parts should be replaced as soon as possible. We will not
accept responsibility for any claims arising from a poor installation.
Passive Infrared Sensor (PIR) Function:
Detection Range: 160°max
Detection Brightness: 3-2000LUX (adjustable)
Detection Duration: Min.: 10sec±3sec
Max.: 7min±3min
Detection Distance: 12m max. (<24°C)
IP54
PIR SENSOR FUNCTION
•
•
•
Adjusting the Lux Control Level: It can work in the daytime and night when it is adjusted on
the “sun” position (max.). It can work in the environment less than 3lux when it is adjusted
on the “moon” position (min.). Customers can adjust between min. to max. as they desire.
Adjusting the Duration Time: It can be set to customer’s needs. The minimum time is
10sec±3sec. The maximum time is 7min±3min. When it receives the second induction
signals after the first induction, it will compute time once more on the rest of the first
duration time.
Adjusting the Sensor: It can be adjusted from low sensitivity of 5m distance to high
sensitivity of 12m distance according to location.
•Switch the internal wall switch from on to o, and then on again within 2 seconds.
It will illuminate continuously.
•To switch the unit back into Auto Mode, switch the internal wall switch from off to on
after 10 seconds.
DESCRIPTION OF OPERATION
This security light comes complete with an infrared detector. It can switch on the
security light when movement in the surrounding area is detected or when natural
daylight becomes dark.
MANUAL OVERRIDE FUNCTION
The light can be switched on for a longer time by using the manual override function.
NOTE: If the external flexible cable or cord of this
luminaire is damaged, it shall be exclusively
replaced by the manufacturer or its agent or a
similarly qualified person in order to avoid a hazard.
Max 12m
1.8-2.5m
1m
PIR Range Details
160°
PIR
Angle of PIR
Adjusting
the PIR
SENS
+ - TIME
+ - LUX
  • Page 1 1

Lumi 104151 User manual

104151
Brand
Lumi
Model
104151
Type
User manual

Lumi 104151 is a security light with a built-in infrared detector that can automatically switch on when it detects movement or when natural light becomes dark. It features a manual override function, adjustable detection brightness (3-2000LUX), and detection duration (10 seconds to 7 minutes). The detection range is up to 12 meters, and the installation height is recommended to be between 1.8 and 2.5 meters.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents