V TAC V-TAC VT-80360 Microwave Sensor Downlight User manual

Brand: V TAC

Model: V-TAC VT-80360 Microwave Sensor Downlight

Type: User manual

The V TAC V-TAC VT-80360 Microwave Sensor Downlight is a versatile and customizable lighting solution for indoor use. With its built-in microwave sensor, it can detect movement within a 360° range and up to 8 meters, making it ideal for hallways, stairwells, or other areas where automatic lighting is desired. It also features adjustable time delay settings, ranging from 10 seconds to 12 minutes, allowing you to customize the duration of the light after motion is detected.

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu

For More products range, inquiry please contact our distributor or nearest dealers.

V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

INSTRUCTION MANUAL

MICROWAVE SENSOR DOWNLIGHT TYPE-ADJUSTABLE

MULTI-LANGUAGE

MANUAL QR CODE

Please scan the QR code to

access the manual in multiple languages.

TECHNICAL DATA

MODEL VT-80360

SKU 23165

INPUT POWER AC: 220-240V, 50/60 Hz

RATED LOAD Max. 1200W

300W +LED

TIME DELAY Min. 10sec ±3sec

Max. 12min ±1min

DETECTION

RANGE 360°

DETECTION

DISTANCE 1-8m (Radius), Adjustable

DETECTION

MOVING SPEED 0.6-1.5m/s

WORKING

TEMPERATURE -20°C to +40°C

POWER

CONSUMPTION Approx, 0.5W

AMBIENT LIGHT <3-2000 LUX (Adjustable)

INSTALLATION

HEIGHT 1.5-3.5m

POWER

CONSUMPTION approx 0.9w

DETECTION

MOTION SPEED 0.6-1.5 m/s

IP RATING IP20

HF SYSTEM 5.8Ghz CW Radar, ISM

Band

DIMENSION Ø80x66.6 mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions

carefully before starting the installation and keep this manual handy for future reference. If you have any another

query, please contact our dealer or local vendor from whom you have purchased the product. They are trained

and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty

does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no

warranty against damage to any surface due to incorrect removal and installation of the product.

V-TAC LED

RANGE (UPTO 400W)

COMPATIBLE WITH

This marking indicates that this prod-

uct should not be disposed of with

other household wastes.

Caution, risk of electric shock.

FUNCTION

WARNING

1. Please make sure to turn o the power before starting the installation.

2. Installation must be performed by a qualiﬁed electrician.

3. For Indoor use only

1. Can identify day and night: It can work in the daytime and at night when it is adjusted on the

“sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the

“3” position (min). As for the adjustment pattern, please refer to the testing pattern.

2. SENS adjustable: It can be adjusted according to using location. The detection distance of low

sensitivity could be only 2m and high sensitivity could be 16m which ﬁts for large room.

3. Time-Delay is added continually: When it receives the second induction signals within the ﬁrst

induction, it will restart to time from the moment.

4. Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time

is 10sec±3sec. The maximum is 12min±1min.

NOTE: the high-frequency output of the HF sensor is

<0.2Mw- that is just one 5000th of the transmission power

of a mobile phone or the output of a microwave oven, the

baby can not touch it

INSTALLATION

1. Swing the plastic cover a little and adjust time and LUX knob.

2. Unload the transparent vinyl cover, loose the screws in the connection terminal, and then

connect the power to connection terminal of sensor according to connection-wire diagram.

3. Fold the metal spring of the sensor upwards, until they are in “I” position with sensor, and

then put the sensor into the hole or installation box which is on the ceiling and has the similar

size with the sensor. Releasing the spring, the sensor will be set in this installation position.

4. Aer ﬁnishing installing, turn on the power and then test it

STEP 1

STEP 2 STEP 3

• Turn the LUX knob clockwise on the maximum (sun). Turn the SENS knob clockwise on

the maximum (+). Turn the TIME knob anti-clockwise on the minimum (10s).

• When you switch on the power, the light will be on at once. And 10sec±3sec later the

light will be o automatically. Then if the sensor receives induction signal again, it can

work normally.

• When the sensor receives the second induction signals within the ﬁrst induction, it will

restart to time from the moment.

• Turn LUX knob anti-clockwise on the minimum (3). If the ambient light is less than 3LUX

(darkness), the inductor load could work when it receives induction signal.

CONNECTION-WIRE DIAGRAM

TEST

Note: When testing in daylight, please turn LUX knob to ☼ (SUN) position, otherwise the

sensor could not work!

• Electrician or experienced human can install it.

• Can not be installed on the uneven and shaky surface

• In front of the sensor there shouldn’t be obstructive object aecting detection.

• Avoid installing it near the metal and glass which may aect the sensor.

• For your safety, please don’t open the case if you ﬁnd hitch aer installation.

• The load don’t work:

a. Check the power and the load.

b. Whether the indicator light is turned on aer sensing? If yes, please check load.

c. If the indicator light does not turn on aer sensing, please check if the working light

corresponds to the ambient light.

d. Please check if the working voltage corresponds to the power source.

• The sensitivity is poor:

a. Please check the ambient temperature.

b. Please check if the signals source is in the detection ﬁelds.

c. Please check the installation height.

• The sensor can’t shut automatically the load:

a. If there are continual signals in the detection ﬁelds.

b. If the time delay is set to the longest.

c. If the power corresponds to the instruction.

NOTES

SOME PROBLEM AND SOLVED WAY:

V TAC V-TAC VT-80360 Microwave Sensor Downlight User manual

V TAC V-TAC VT-80360 Microwave Sensor Downlight User manual

V TAC V-TAC VT-80360 Microwave Sensor Downlight User manual

Related papers

Other documents