Sealey AK39902.V3 Operating instructions

  • Hello! I've reviewed the user manual for the Sealey Riveter AK39902.V3. This document provides safety guidelines, operating instructions, and specifications for the riveter, including information about compatible rivet types and included nozzle sizes. I'm ready to assist you with your questions about this tool.
  • What types of rivets can this tool use?
    What nozzle sizes are included?
    What safety precautions should I take when using this tool?
LAZY TONGS RIVETER
MODEL NO: AK39902.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure health & safety, local authority, and general workshop practice regulations are adhered to when using
this equipment.
9 Familiariseyourselfwithapplicationandlimitations,aswellasthespecicpotentialhazardspeculiartotheriveter.
9 Replaceorrepairdamagedparts.Usegenuinepartsonly.Nonauthorisedpartsmaybedangerousandwillinvalidatethewarranty.
9 Keeptherivetercleanforbestandsafestperformance.
9 Locateriveterinanadequateworkingareaforitsfunction,keepareaclean&tidyandfreefromunrelatedmaterialsandensurethere
is adequate lighting.
9 Keep children and unauthorised persons away from the working area.
9 Removeillttingclothing.Removeties,watches,rings,andotherloosejewellery,andcontainand/ortiebacklonghair.
WARNING!Alwayswearapprovedeyeorfaceprotectionwhenoperatingtheriveter.
9 Keepngers,handsandbodyclearofallworkingpartsandDO NOT placeanyitemswithintheriveterlattice.
9 Familiarise yourself with the push action to ensure you DO NOT accidentally wrench your wrist when pushing sharply.
9 Maintaincorrectbalanceandfooting.Ensuretheoorisnotslipperyandwearnonslipshoes.
9 Securenonstableworkpiecewithaclamp,viceorotheradequateholdingdevice.
9 Ensurethatallusedrivetendsaredisposedofinasafemanner.
8 DO NOTgettheriveterwetoruseinwetlocations.
8 DO NOTusetheriveterforanypurposeotherthanforwhichitisdesigned.
8 DO NOToperatetheriveterwhenyouaretired,undertheinuenceofalcohol,drugsorintoxicatingmedication.
8 DO NOTallowuntrainedpersonstooperatetheriveter.
8 DO NOToperatetheriveterifanypartsaredamagedormissingasthismaycausefailureorpossiblepersonalinjury.
2. INTRODUCTION
AluminiumheadwithsteeljawcaseandChromeMolybdenumjawsforaluminium,steelandstainlesssteelrivets.Suitableforrepetitiveriveting
tasks.Suppliedwithvenozzles.
3. SPECIFICATION
Model No.: ......................................................... AK39902.V3
Nozzles: ................................................................................
. 3.2mm(1/8”),4mm(5/32”),4.8mm(3/16”),6mm,6.4mm(1/4”)
Length: ....................................................................... 800mm
RivetTypes: ...........................................................................
............ Aluminium - Yes, Stainless Steel-Yes, Structural - No
4. OPERATION
4.1. NOZZLES
4.1.1. Selecttheappropriatenozzle.
4.1.2. Toremovenozzleathead,usesuitablewrench.Ensurethereplacementnozzleiscompletelyscrewedinandlightly 
tighten with wrench.
4.2. TO OPERATE
4.2.1. Holdtheheadandpullthehandlesothatthelatticeiscompletelyextended.
WARNING!Ensureyourngersareclearofmovingparts.Insertrivetshaftallthewayintothenozzle.
4.2.2. Insertrivetheadcompletelyintothepreparedworkpiecehole.
4.2.3. Holdtheriveterrmlyandpushonthehandletocompletelyclosethelatticewhichwillxtherivetinplaceandcuttheshaft.Should
 rivetingnotbeachievedonthersttrythenre-extendthelatticeandpushoncemore.
4.2.4. Oncecompleted,pullthehandletoextendthelatticeagaintoejecttheshaftendfromthenozzle.Safelydiscardofshaftends.
AK39902.V3Issue2(2)14/12/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
g.1
Wear eye
protection
Crushingof
hands
5. MAINTENANCE
5.1. Keeptheriveterclean.
5.2. Uselightmachineoiltooccasionallylubricatethelatticepivotpins.
5.3. Whennotinuse,storetheriveterinasafe,dry,childprooflocation.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
Note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponentpartswithoutprior
notice. Pleasenotethatotherversionsofthisproductareavailable.Ifyourequiredocumentationforalternativeversions,pleaseemailorcall
ourtechnicalteamontechnical@sealey.co.ukor01284757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Partssupportisavailableforthisproduct.
www.sealey.co.uk,emailsales@sealey.co.ukortelephone01284757500
Original Language Version
© Jack Sealey Limited AK39902.V3Issue2(2)14/12/21
/