aidacare WAT820187 Operating instructions

New Product Launch

03/12/2021

ASPIRE MOBILE PPE DISPENSER WITH NESTING BASE

Introducing the Aspire Mobile PPE Dispenser with Nesting Base.

This nifty mobile unit can hold an array of PPE and be wheeled anywhere for convenience, ensuring PPE is

always at the ready for nursing, clinical, cleaning or other staff, especially relevant and important in the

current climate of elevated infection control awareness and protocols.

You may notice that the unit is mounted onto the same nesting base as the Aspire Mobile IV Pole, which has

proved very popular, being extremely stable, mobile, and taking up minimal space when stacked or ‘nested’

together for storage of multiple units.

Also shown below is the Wall Mounted PPE dispenser, which utilises the same PPE cabinet, just fixed to a

wall.

PRODUCT FEATURES

•Nesting Base Design - minimises stacking & storage space.

•Sturdy Cast-Iron Base - extremely stable to accommodate a full load of PPE items ready to dispense.

•Mobile Storage for key PPE - ensures items such as sanitizer, wipes, gowns, masks and gloves are

readily available wherever required.

•Castors – 5 x 75mm castors for ease of moment with 2 x total locking, to secure in place when not in

use.

WAT820187 – Mobile PPE Dispenser – Nesting Base

WAT824752 – Wall Mounted PPE Dispenser