2. Select Blinds
  3. Designer Double Cell Blackout Honeycomb Shades
Designer Double Cell Blackout Honeycomb Shades

Select Blinds Designer Double Cell Blackout Honeycomb Shades User manual

  • Hello! I've reviewed the Select Blinds user manual for the Designer Double Cell Blackout Honeycomb Shades. This manual provides detailed instructions on how to install your shades with various mounting options, as well as how to use the cordless lift feature. I'm ready to help answer your questions about the shades and their installation process.
  • What tools are needed for installation?
    What is the distance from the window casing or flush mount?
    How do I attach the cordless lift handles?
Home » Select Blinds » Select Blinds Designer Double Cell Blackout Honeycomb Shades Instruction Manual
Contents [ hide
1 Select Blinds Designer Double Cell Blackout Honeycomb
Shades
2 HOW TO INSTALL
3 Tools Needed
4 Inside/Ceiling Mount
5 Outside Mount
6 Optional Side Mount
7 Documents / Resources
8 Related Posts
Select Blinds Designer Double Cell Blackout Honeycomb Shades
Select Blinds Designer Double Cell Blackout Honeycomb
Shades Instruction Manual
Manuals+ — User Manuals Simplified.
HOW TO INSTALL
Inside/Ceiling or Outside Mount Cordless Lift Cellular or Pleated Shade Everything needed to install your shade
1. Shade
2. Brackets/Screws
3. Cordless Lift Handle(s)
4. Optional Hold down Brackets
5. Optional Extension Brackets
6. Optional Side-Mount Brackets
Tools Needed
Inside/Ceiling Mount
1. Place shade in the desired location and mark the front edge
2. Measure 3″ in from the shade edge on both ends and mark
3. Mark screw locations; center additional brackets, if applicable
4. Position 5⁄16″ from the window casing for a flush mount
5. Drill holes
6. Screw brackets into place
7. Mount shade into brackets
8. Attach cordless lift handle(s)
For shades up to 24″ wide, clip a handle centered on the bottomrail; do not pinch fabric or slat. For larger shades,
attach two handles, spaced evenly as far apart as you can comfortably reach. To lower shade, use handle(s) to
pull down. To raise the shade, use the handle(s) to lift up.. Follow the same procedure for bottom-up/top-down.
Outside Mount
1. Place shade in the desired location and mark corners
2. Measure 3″ in from the shade edge on both ends and mark
3. Mark screw locations; center additional brackets, if applicable
4. Drill holes
5. Screw brackets into place
6. Mount shade into brackets
7. Attach cordless lift handle(s). (See another side for the diagram and instructions.)
1. Optional Extension Bracket
2. Optional hold-down brackets
Optional Side Mount
Optional side mounts for shades 60″ or less: Assemble brackets.
Measurements from window casing to front of bracket for flush mount:
13⁄8″ for 3⁄8″ Single Cell and
1″ Pleated Shades
15⁄8″ for 3⁄4″ Single Cell, 1⁄2″ Double
Cell and 2″ Pleated Shades
23⁄8″ for 11⁄4″ Single Cell Shade
Documents / Resources
Select Blinds Designer Double Cell Blackout Honeycomb Shades [pdf] Instruction Manual
Designer Double Cell Blackout Honeycomb Shades, Double Cell Blackout Honeycomb
Shades, Cell Blackout Honeycomb Shades, Honeycomb Shades, Shades
Manuals+, home privacy
/