KONDBAM WCA01 User guide

Common Questions and Answers

AUDIO LATENCY

A:The adaptability of each system to external software is different, and the

adaptability of on-board systems is like that also.They will change with the

upgrading and reconstruction of vehicles.Only about 1% of the car models will

have audio delay problems, but this is a normal phenomenon within the range,

because wireless carplay adapter with transmission technology, and the data

needs to be cached during the transmission process. If the cache is lowered, it

will cause lag issues.

DISCONNECTING & RECONNECTING

A:On your iPhone make sure WIFI is on, go to "General"==>

“CarPlay" on your

phone, then on the wireless Adapter device name, make sure CarPlay is on,

then forget BT connection history on your phone, repair using a new

connection again. If that does not correct the issue please add a delay on the

Settings page of the Adapter start with 10s.

POOR SCREEN RESOLUTION

A：

1. After Carplay is paired, on the internet browser of iPhone input

192.168.1.101 to enter settings. Go down to “Connection Setup”and tap to

enter it.

2. Turn on the “Compatibility mode”, leave the settings page, then try again

to see if the display issue disappears.

3. If it doesn't, On the browser input 192.168.1.101 to enter settings again, go

back to “Connection setup”

, then turn off “Enable connections tips”

and try

again.

SOFTWARE UPGRADING STUCK AT 1%

A:Do not use the head unit USB for Software upgrading. Use a laptop USB

socket or a phone charger USB socket to upgrade the software. Connect to the

adapters WiFi using password "88888888" that is 8 times the number 8.

Download PDF