Qiaohua Industries SP-N01NL WiFi Light Switch User manual

Brand
Qiaohua Industries
Model
SP-N01NL WiFi Light Switch
Type
User manual

Qiaohua Industries SP-N01NL WiFi Light Switch lets you control your lights from anywhere with your smartphone via the Tilvision app. It's easy to set up - just download the app, create an account, and follow the installation wizard. You can also use the included remote control to turn your lights on and off. The switch has a maximum power of 200W and a Wi-Fi coverage of <15M. It requires a power input of AC 100V-240V. The switch comes with a manual and an accessories set. It must be installed by a qualified electrician in accordance with the installation rules.

Qiaohua Industries SP-N01NL WiFi Light Switch lets you control your lights from anywhere with your smartphone via the Tilvision app. It's easy to set up - just download the app, create an account, and follow the installation wizard. You can also use the included remote control to turn your lights on and off. The switch has a maximum power of 200W and a Wi-Fi coverage of <15M. It requires a power input of AC 100V-240V. The switch comes with a manual and an accessories set. It must be installed by a qualified electrician in accordance with the installation rules.

4. APP Setup:
Download free app Tilvision, available on the iOS App Store or
on Android Google Play.
Create your account following the instructions in the application.
Click ‘+’ to add device and follow the installation wizard in the
application.
Warning: In case the Wi-Fi network or password changed, press
the pairing button 5 until LED blink blue and red. Then follow the
instruction in the app to add the device again.
5. Use:
On the switch :
Turn on / off the light by pressing button.
With the remote control:
Press the ‘ON’ (‘OFF’) button on remote control to turn the light
on (of).
With your smartphone, via Tilvision:
Switch On/Off on app from anywhere.
Wi-Fi Light Switch
Ref: SP-N01NL
Instruction Manual
6. Technical Specification:
Power Input: AC 100V-240V
Wi-Fi coverage: <15M
Max.: 200W
09:39
769
KB/s 89% 09:39
769
KB/s 89%
- 01 -
L
NX
N L L1L1
1. Packaging List:
1x Switch 1x Manual 1x Accessories set
2. Wire Connection:
Attach the wires according to Wire Connection.
Install the switch with wall box which is already fixed in the wall.
Mount the cover face to the switch.
3. Installation:
This product must be installed in accordance with the installation
rules and preferably by a qualified electrician. Incorrect installation
and / or incorrect use may cause risk of electric shock or fire.
Cut the power supply before any intervention.
Strip around 8mm cables to have a good contact surface.
Switch on the power.
- 02 - - 03 - - 04 -
RF Exposure Information
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum distance
of 20 cm between the radiator and your body.
This transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
  • Page 1 1

Qiaohua Industries SP-N01NL WiFi Light Switch User manual

Brand
Qiaohua Industries
Model
SP-N01NL WiFi Light Switch
Type
User manual

Qiaohua Industries SP-N01NL WiFi Light Switch lets you control your lights from anywhere with your smartphone via the Tilvision app. It's easy to set up - just download the app, create an account, and follow the installation wizard. You can also use the included remote control to turn your lights on and off. The switch has a maximum power of 200W and a Wi-Fi coverage of <15M. It requires a power input of AC 100V-240V. The switch comes with a manual and an accessories set. It must be installed by a qualified electrician in accordance with the installation rules.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents