Home » SALUS » SALUS CB500X Extension Module Control Box User Manual
CB500X Extension Module Control Box
User Manual
Contents
1 CB500X – Wiring
diagram.
2 Documents / Resources
3 Related Posts
CB500X – Wiring diagram.
PLEASE NOTE!
If wiring centres CB500 and CB500X are connected with EXTENSION connector, then it is not allowed to connect
additional 230V power supply to power contacts in CB500X wiring centre. Otherwise, you risk permanent damage
to the wiring centres. The power input of the CB500X should be used when it operates as a standalone device
(when the EXTENSION sockets are not used).
SALUS CB500X Extension Module Control Box User Manual
Manuals+ — User Manuals Simplified.
* The CB500X extension works as a standalone device.
*CB500X connected to CB500 wiring centre.
**CB500 wiring centre with built-in module, 5 zones, 230V.
Battery powered Wireless communication
L, N 230V AC power supply Pump
Fuse Valve actuator
COM, NO, N
CVoltage free output Temperature sensor
S, S1, S2 Input terminals 3-speed 230V AC fan
SL 230V AC voltage output Light bulb or other load
Contact normally open Thermoelectric actuator
Contact normally closed Time programmer
NC/COM/NO switch External normally open contact
Boiler – Boiler connection * – Boiler’s
contacts for ON/OFF thermostat (acc
ording to the boiler’s instructions)
Voltage converter
Documents / Resources
SALUS CB500X Extension Module Control Box [pdf] User Manual
CB500X Extension Module Control Box, CB500X, Extension Module Control Box, Module Contr
ol Box, Control Box, Box
Manuals+,
/
