Draw-Tite 75116 is a vehicle hitch designed for use with a Mitsubishi Montero. It has a weight carrying capacity of 5500 lbs and a weight distributing capacity of 5500 lbs. The hitch is compatible with a 5/8" pin and clip and requires a stabilizing pin (7651) for use. To install the hitch, remove the plastic fascia and tie down bracket assembly, then raise the hitch into position and attach it with the OEM bolts. Reattach the plastic fascia with the cable ties provided. Tighten all fasteners to 65 ft-lbs of torque.
Draw-Tite 75116 is a vehicle hitch designed for use with a Mitsubishi Montero. It has a weight carrying capacity of 5500 lbs and a weight distributing capacity of 5500 lbs. The hitch is compatible with a 5/8" pin and clip and requires a stabilizing pin (7651) for use. To install the hitch, remove the plastic fascia and tie down bracket assembly, then raise the hitch into position and attach it with the OEM bolts. Reattach the plastic fascia with the cable ties provided. Tighten all fasteners to 65 ft-lbs of torque.
-
1
Draw-Tite 75116 is a vehicle hitch designed for use with a Mitsubishi Montero. It has a weight carrying capacity of 5500 lbs and a weight distributing capacity of 5500 lbs. The hitch is compatible with a 5/8" pin and clip and requires a stabilizing pin (7651) for use. To install the hitch, remove the plastic fascia and tie down bracket assembly, then raise the hitch into position and attach it with the OEM bolts. Reattach the plastic fascia with the cable ties provided. Tighten all fasteners to 65 ft-lbs of torque.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Draw-Tite 75116 Installation guide
-
-
-
-
-
-
-
-
-