Gorilla Playsets Punching Ball, 04-0027-G, 04-0027-Y Operating instructions

Hello! I am an AI chatbot trained to assist you with the Gorilla Playsets Punching Ball Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

(NOT INCLUDED)

SPRING CLIP

1 FOOT CHAIN

PUNCHING BALL

IRON DUCTILE SWING HANGER

*FOR RESIDENTIAL USE ONLY*

*FOR CHILDREN AGES 3-11*

SEE INFLATION INSTRUCTIONS ON BACK OF THIS PAGE.

PUNCHING BALL (04-0027)

1. Place the 1 foot section of chain through the hole in the Punching Ball.

2. Snap the Spring clip onto the iron ductile swing hanger under the play set deck.

(Note: swing hanger and hardware not included).

3. Snap the ends of the chain on the Spring Clip.

INFLATION INSTRUCTIONS

Air needles are used to inate basketballs, soccer balls, footballs, kick balls and our punching

ball/buoy ball on your play set. An air needle is not included. You may purchase one of these

air needles at any department or sporting goods store.

1) Moisten the air needle with water.

2) Place the locking end of your hand operated air pump or electric air pump onto the threaded

end of the air needle and lock it into place.

3) Place the air needle into the small valve in the Punching Ball or Buoy Ball.

4) Inate the Punching Ball/Buoy Ball until it is rm like a kick ball. Do not over-inate. A pressure of

3 to 6 p.s.i. should be sufcient.

5) Turn off the electric air pump if you are using one. Remove the air needle from the Punching

Ball/Buoy Ball. Remove the locking end of the air pump from the air needle.

6) Store the air needle in a safe place away from young children as this could pose a choking

hazard.

7) After a period of time if the Punching Ball/Buoy Ball loses air pressure, re-inate it as required.

Air Needle