ARC 2-Wire ELT/RSWT Interface
The ARC 2-Wire ELT/RSWT Interface is a device that allows you to connect your Artex Emergency Locator Transmitter (ELT) to a single toggle switch, providing you with remote control of your ELT. This can be useful in a variety of situations, such as when you need to activate your ELT from a remote location or when you want to be able to quickly and easily test your ELT's functionality.
The interface is compatible with all Artex ELTs except for the ELT-200 series. It is also compatible with the Artex 140-3349 toggle switch.
The interface is easy to install and can be used in both 14 VDC and 28 VDC aircraft electrical systems. It comes with a cable harness that makes it easy to connect the interface to your ELT and toggle switch.
ARC 2-Wire ELT/RSWT Interface
The ARC 2-Wire ELT/RSWT Interface is a device that allows you to connect your Artex Emergency Locator Transmitter (ELT) to a single toggle switch, providing you with remote control of your ELT. This can be useful in a variety of situations, such as when you need to activate your ELT from a remote location or when you want to be able to quickly and easily test your ELT's functionality.
The interface is compatible with all Artex ELTs except for the ELT-200 series. It is also compatible with the Artex 140-3349 toggle switch.
The interface is easy to install and can be used in both 14 VDC and 28 VDC aircraft electrical systems. It comes with a cable harness that makes it easy to connect the interface to your ELT and toggle switch.
ARC 2-Wire ELT/RSWT Interface
The ARC 2-Wire ELT/RSWT Interface is a device that allows you to connect your Artex Emergency Locator Transmitter (ELT) to a single toggle switch, providing you with remote control of your ELT. This can be useful in a variety of situations, such as when you need to activate your ELT from a remote location or when you want to be able to quickly and easily test your ELT's functionality.
The interface is compatible with all Artex ELTs except for the ELT-200 series. It is also compatible with the Artex 140-3349 toggle switch.
The interface is easy to install and can be used in both 14 VDC and 28 VDC aircraft electrical systems. It comes with a cable harness that makes it easy to connect the interface to your ELT and toggle switch.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI