Manhattan 158282 Installation guide

Category
Interface cards/adapters
Type
Installation guide
SATA 300 TO IDE
CONVERTER
QUICK
INSTALL GUIDE
Model 158282
Thank you for purchasing the
MANHATTAN
®
SATA 300 to IDE
Converter, Model 158282.
Connecting a newer SATA 300
drive with an IDE controller, it helps
control upgrade costs, simplies
installs and extends the service
life of existing IDE connections.
MH-158282-miniQIG-0609-01
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
MANHATTAN
®
offers a complete line of PC Components, Peripherals, Cables and
Accessories. Ask your local computer dealer for more information or visit us online at
www.manhattan-products.com
Standards & Certications
• FCC, CE, SATA 2.6
General
• 48-bit LBA support
• Compatible with drives larger than 137 GB
• Hardware bridge supports PC, Mac and Linux
environment
• Dimensions: 75 x 25 x 22 mm (2.9 x 1 x 0.9 in.)
• Weight: 28.3 g (1 oz.)
Package Contents
• SATA 300 to IDE Controller
• Quick install guide
Supports SATA devices
with transfer rates of up to 3 Gbps
Easily attaches SATA drives to IDE connections
Ideal for Blu-ray, SSD, DVD, DVD-RAM, CD-ROM, CD-RW and hard drives
Compatible with drives larger than 137 GB
Small, compact bridge requires minimal installation space
Lifetime Warranty
Installation
instructions
are on the
back of this
sheet.
SPECIFICATIONS
INSTALLATION
1. Connect the Y-type power cable to the J1 connector and the
PC power supply.
2. Set the J3 jumper on IDE Master, Slave or Cable Select mode.
I M PORTANT: Set to Master mode when booting the device.
3. Attach the 22-pin SATA connector (P1) to the back of the SATA
device.
4. Connect the IDE cable to the 40-pin connector (J2) and the
motherboard IDE host.
P1
J1
J3
J2
  • Page 1 1
  • Page 2 2

Manhattan 158282 Installation guide

Category
Interface cards/adapters
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI