We’re happy to help. Call 1-888-743-3673.
A beautiful finish that always looks new.
BOX CONTENTS
Each Fence Panel Box Includes:
Thank you for choosing to surround your patio, pool or lawn with a Weatherables Pool Fence! While
perfect around pools, our fence also looks great in any area of your yard. Our exclusive manufacturing
process makes fencing that resists water, humidity and many chemicals. The bottom rail is also
reinforced with aluminum for added strength and durability. This guide will help make your installation
easy. For questions, please call 1-888-743-3673 and welcome to Weatherables.
Post Cap (1)
This Post & Cap not
Included (See note on
left)
All dimensions are in inches (“)
0.070 wall thickness
.140 thickness
Top Rail (1)
Pickets (17)
Hole Cover (4)
Bottom Rail (1)
Post (1)
Welcome
1
PLEASE NOTE:
YOU WILL NEED TO PURCHASE ONE EXTRA POST
KIT TO COMPLETE EACH OF YOUR FENCE RUNS
Additional Post & Cap (1)
Sold Separately:
Aluminum Insert (1)
*located in bottom rail
We’re happy to help. Call 1-888-743-3673.
This fence can be trimmed down in width to accommodate
custom applications
Product Specifications
TOP VIEW
3.5
3.5
3.5
96.0
1.75
1.75
0.120 wall thickness
0.120 wall thickness
Concrete Footing
Ground
1.5
2.0
48.552.5
84.0
36.0
31.5
10.0
2.0
3.645
All dimensions are in inches (“)
*Check local code before installing around a pool
2
4.0
4.0
TAB
We’re happy to help. Call 1-888-743-3673.
Installation
2. Digyoursecondhole96”oncentertoyourrsthole,yourthirdhole96”oncentertoyoursecond
hole, and so on. Be sure to dig only 3-4 holes at a time to ensure proper spacing.
1. Stringyourfencelineandbeginbydiggingyourrstposthole:10”widex32”-36”deep.
• We recommend installing 1 post and section at a time but other methods work too. Alter this method
to suit your installation needs.
• Prior to construction, check with your regulatory agency for special code requirements in your area.
• Contact your utility supplier to locate and mark underground lines before excavation.
• Sketch out the layout of your fence and calculate the number of panels, gates and posts required (to
nishafencerun,oneextrapostkitisneeded).
• Careful planning and measuring of your fence is essential. Keep in mind that moving posts after the
concretesetsisextremelydifcult.
Important Reminders:
3
1
96.0
36.0
Fast2K Tip! For Fast2k install, dig hole 6”wide x 32” deep.
Fast2k Tip! Wherever concrete is used in installation, use Fast2K instead to simplify the process.
Fast2K is a concrete alternative that is much easier to use and set.
10.0
We’re happy to help. Call 1-888-743-3673.
1. Insert post A into hole and set concrete. Post B may be loosely laying in hole until panel is fully
installed. Repeat process down the line.
Installation
4
1. Insert rail with aluminium (bottom rail) into
bottom route of post A and then into the
bottom route of post B.
1. Slide pickets through holes in bottom rail.
2
3 4
First post is already
concreted
Next post is in hole
with no concrete
Fast2K Tip! Add one 12.4 oz. bag to the hole. Hold post in place to prevent movement and follow
mixing instructions on the bag. Pour around post and plumb during expansion.
2. To set posts in concrete, hold post in place and prevent movement to ensure the post stays straight.
Be prepared to use a minimum of (2) 60lb. bags of concrete for each post hole.
3. Mix concrete and pour wet.
4. Fill hole around and in concrete hole to ground level and plumb.
B
A
B
A
B
A
We’re happy to help. Call 1-888-743-3673.
Under some conditions, panels may be reduced in length. If this applies, be sure to cut the top and
bottom rails the same length to ensure proper picket alignment.
PANEL ADJUSTMENTS:
Installation
5
This fence panel can rack up to 15”. over
an 8ft. span. If more material is needed,
please call 1-888-743-3673.
1. Insert top rail into post A and place each
pick into holes along the top rail.
1. Insert top rail into the opposite post.
2. Straighten and level next post.
3. Pour in mixed concrete.
4. Insert post hole covers into unused
holesofrstpost.Repeatstepsdown
the line.
5
7
B
A
6
B
A
/
