Runco CX-46HD User manual

Brand: Runco

Model: CX-46HD

Category: TVs & monitors

Type: User manual

This manual is also suitable for

CX-40HD

OWNER’S OPERATING MANUAL

CX-40HD

CX-46HD

High-Definition, 1080p Liquid-Crystal Display (LCD) Panels

with

Runco CX-40HD/CX-46HD Owner’s Operating Manual iii

PRE

IMINAR

ONE YEAR LIMITED WARRANTY

For LCD Displays

Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces

“The World’s Finest Home Theater Products.” With proper installation, setup and care, you should enjoy many years of

unparalleled video performance.

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your

other important documents.

SERVICE LABOR: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a

manufacturing defect for a period of one (1) year from the effective date of delivery to the end user.

PARTS: Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship

for a period of one (1) year from the effective date of delivery to the end user. Such replacement parts are then subsequently

warranted for the remaining portion (if any) of the original warranty period.

Image retention on LCD display panels is specifically excluded from coverage under this Limited Warranty. Image retention or

staining of an image is the result of misuse of the product and therefore cannot be repaired under the terms of this Limited

Warranty.

Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of

time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers

for this reason.

TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are not left on your LCD display panel. Also

ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is present on the

left and right edges of the screen) are used as infrequently as possible. This will prevent permanent retention on your LCD

display panel, which can be seen permanently under certain conditions once burn-in has occurred.

The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This

is why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after

being displayed continuously for an extended period of time).

This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does

not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from

accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper

maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and

brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote

control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this

Limited Warranty.

CAUTION: THIS LIMITED WARRANTY ONLY COVERS RUNCO PRODUCTS PURCHASED FROM RUNCO AUTHORIZED

DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED

WARRANTY. MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP

IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT

INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN AUTHORIZED RUNCO DEALER TO PROTECT YOUR

RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY THE FINE PERFORMANCE OF WHICH

YOUR RUNCO PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY RUNCO AUTHORIZED PERSONNEL.

WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

iv Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

Runco limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There

are no express warranties. Runco also excludes any obligation on its part for incidental or consequential damages related to

the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and

some states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or

exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from

state to state.

This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as

evidence of the purchase date.

Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we

should discover a safety problem or product update for which you must be notified.

Repairs made under the terms of this Limited Warranty covering your Runco video product will be performed at the location of

the product, during usual working hours, providing location of product is within normal operating distance from a Runco

Authorized Service Center. In some instances it may be necessary for the product to be returned to the Runco factory for

repairs. If, solely in Runco’s judgment, location of product to be repaired is beyond normal operating distance of the closest

Runco Authorized Service Center, or the repair requires the unit be returned to the Runco factory, it is the owner’s

responsibility to arrange for shipment of the product for repair. These arrangements must be made through the selling Runco

Dealer. If this is not possible, contact Runco directly for a Return Authorization number and shipping instructions. Runco will

return product transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping

costs will be the responsibility of the owner.

other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any mechanical,

electronic or other means, in any form, without prior written permission of the manufacturer.

Reflection, Enhanced GEN3, DHD, Vivix, Virtual Cinema, CineWide, AutoScope, O-Path, CinOptx, LiveLink, CSMS, SuperOnyx

and VirtualWide are trademarks of Runco International. All other trademarks and registered trademarks used in this document

are the property of their respective owners.

Runco International products are manufactured under one or more of the following patents: US. Patent 6755540 and Other

Patents Pending.

RIGHTS, LIMITS AND EXCLUSIONS:

EFFECTIVE WARRANTY DATE:

IMPORTANT – WARRANTY REGISTRATION:

CONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:

Runco CX-40HD/CX-46HD Owner’s Operating Manual v

PRE

IMINAR

To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this

Limited Warranty, please call or write:

RUNCO INTERNATIONAL, INC.

Attn: Customer Service Department

2900 Faber Street

Union City, CA 94587

Ph: (510) 324-7777

Fax: (510) 324-9300

Toll Free: (800) 23-RUNCO

RUNCO VIDEO-PRODUCT INFORMATION

RETAIN THIS INFORMATION FOR YOUR RECORDS

_________________________________________________________ ________________________________________

Model Purchased Date

____________________________________________________________________________________________________________

Serial Number

____________________________________________________________________________________________________________

Runco Authorized Dealer Name

____________________________________________________________________________________________________________

Address

____________________________________________ __________________ ________________________

City State/Province Postal Code

____________________________________________ _______________________________________________________

Phone Fax

ADDITIONAL INFORMATION:

vi Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

Thank you for your purchase of this quality Runco product! It has been designed to provide you with the quality of video that is

expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus

and operation.

CAUTION

To turn off main power, be sure to remove the plugs from power outlets. The power outlet socket should be installed as near to

the equipment as possible, and should be easily accessible.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS

UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN

BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This equipment has been tested and found to comply with the limits for a Class ‘B’ digital device, pursuant to Part 15 of FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the Installation Manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area may cause harmful interference, in which case the user will be required to correct the

interference at his own expense.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Please read and follow the safety precautions listed below to ensure the equipment is free from damage, and to ensure that no

injury will occur as a result of improper use.

• Do not insert any object, especially metal or liquids, into the LCD display.

• Do not place any objects containing water or any other liquid on top of the LCD display.

• Do not place the units in direct sunlight, near heaters or in extremely dusty or humid locations.

• Do not install this system outdoors or otherwise exposed to the elements.

• Do not place heavy objects on top of the LCD display.

• If the power cord is damaged or frayed in any way, electrical shock and/or fire may result. Do not place objects on the

power cord, and keep the cord away from heat-emitting devices. Should the power cord become damaged in any way,

please contact your Runco Dealer for a replacement cord.

• Do not remove the cover of the LCD display for any reason. If any problems arise with the unit, please contact a Runco

Dealer or Runco International for service. Removing the covers will void the warranty.

Safety Precautions

WARNING

This symbol is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

This symbol is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Runco CX-40HD/CX-46HD Owner’s Operating Manual vii

1Table of Contents

PRE

IMINAR

ONE YEAR LIMITED WARRANTY .................................................................................. iii

Safety Precautions ......................................................................................................... vi

1. Introduction ...............................................................................................................1

About This Manual .......................................................................................................1

Target Audience .....................................................................................................1

If You Have Comments About This Manual... ..........................................................1

Textual and Graphic Conventions ...........................................................................1

Using This Manual ........................................................................................................2

Description, Features and Benefits ...............................................................................3

Key Features and Benefits ......................................................................................3

Parts List ...............................................................................................................4

2. Controls and Functions ............................................................................................5

Crystal Series LCD Display at a Glance ........................................................................5

Controls and Indicators...........................................................................................5

Crystal Series LCD Display Inputs and Outputs.......................................................6

Crystal Series LCD Display Remote Control .................................................................8

3. Installation ...............................................................................................................13

Remote Control ..........................................................................................................13

Battery Installation ................................................................................................13

Notes on Remote Control Operation.....................................................................13

Quick Setup ...............................................................................................................14

Installation Considerations ..........................................................................................15

Wall-Mounting the Crystal Series LCD Display ......................................................15

Ambient Light .......................................................................................................15

Other Considerations ............................................................................................15

Connections to the Crystal Series LCD Display ...........................................................16

Rear Connector Access........................................................................................16

Connecting the Crystal Series LCD Display to Source Components......................16

AV OUT Connection .............................................................................................20

Connecting Headphones ......................................................................................20

Connecting External Speakers (Optional) ..............................................................21

Connecting to a Dolby Digital Amplifier..................................................................22

RS-232 Controller Connection ..............................................................................23

Table of Contents

viii Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

4. Operation .................................................................................................................25

Turning on the Power .................................................................................................25

Changing the OSD Language .....................................................................................25

Setting the PC Display Properties ...............................................................................26

Using the On-Screen Menus ......................................................................................27

Main Menu ...........................................................................................................29

Source .................................................................................................................29

Aspect Ratio ........................................................................................................29

Picture Adjust .......................................................................................................31

Audio ...................................................................................................................35

Channel ...............................................................................................................36

Timer ...................................................................................................................37

Setup....................................................................................................................38

ISF Calibration .....................................................................................................42

Using Picture-In-Picture (PIP) .....................................................................................44

Changing the PIP Position ....................................................................................46

Changing the PIP Size ..........................................................................................46

Changing the PIP Aspect Ratio .............................................................................46

Swapping the Main and PIP Images .....................................................................47

Swapping the Main and PIP Audio Programs........................................................47

Stereo Sound/SAP .....................................................................................................47

5. Maintenance and Troubleshooting ........................................................................49

Troubleshooting Tips ..................................................................................................49

6. Serial Communications ..........................................................................................51

RS-232 Connection and Port Configuration ...............................................................51

Serial Command Syntax .............................................................................................51

7. Specifications ..........................................................................................................57

Crystal Series LCD Display Specifications ...................................................................57

Crystal Series LCD Display Dimensions ......................................................................59

Computer Signal Compatibility ...................................................................................61

Runco CX-40HD/CX-46HD Owner’s Operating Manual ix

1List of Figures

PRE

IMINAR

2-1. Crystal Series LCD Display Controls and Indicators ......................................................5

2-2. Crystal Series LCD Display Rear-Panel Inputs and Outputs ..........................................6

2-3. Crystal Series LCD Display Remote Control..................................................................8

3-1. Antenna/Cable TV Connection ...................................................................................16

3-2. HDMI Connections .....................................................................................................17

3-3. Analog RGB Connections...........................................................................................18

3-4. Component Video Connections..................................................................................19

3-5. Composite and S-Video Connections.........................................................................19

3-6. AV OUT Connections .................................................................................................20

3-7. Connecting Headphones............................................................................................20

3-8. External Speaker Connection .....................................................................................21

3-9. Removing the Built-in Speakers..................................................................................21

3-10. Digital Audio Connection ..........................................................................................22

3-11. RS-232 Control System Connection.........................................................................23

4-1. Crystal Series LCD Display OSD Menu Structure........................................................28

4-2. Typical PLUGE Pattern for Adjusting Brightness .........................................................31

4-3. Typical Gray Bar Pattern for Adjusting Contrast ..........................................................32

4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint................................33

4-5. Typical Test Pattern for Adjusting Sharpness..............................................................34

4-6. Crystal Series LCD Display Splash Screen..................................................................43

7-1. CX-40HD Dimensions ................................................................................................59

7-2. CX-46HD Dimensions ................................................................................................60

List of Figures

x Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

Runco CX-40HD/CX-46HD Owner’s Operating Manual 1

PRE

IMINAR

1.1

About This Manual

This Owner’s Manual describes how to install, set up and operate the Runco Crystal

Series Model CX-40HD and CX-46HD LCD Displays. Throughout this manual, the Runco

CX-40HD and CX-46HD LCD Displays are referred to simply as the “Crystal Series LCD

Display.”

Target AudienceRunco has prepared this manual to help home theater installers and end users get the

most out of the Crystal Series LCD Display.

Runco has made every effort to ensure that this manual is accurate as of the date it was

printed. However, because of ongoing product improvements and customer feedback, it

may require updating from time to time. You can always find the latest version of this and

other Runco product manuals on-line, at www.runco.com.

If You Have Comments

About This Manual...

Runco welcomes your comments about this manual. Send them to techpub@runco.com.

Textual and Graphic

Conventions

Text Conventions: The following conventions are used in this manual, in order to clarify

the information and instructions provided:

• Remote control button identifiers are set in upper-case bold type; for example, “Press

EXIT to return to the previous menu.”

• Computer input (commands you type) and output (responses that appear on-screen) is

shown in monospace (fixed-width) type; for example: “To change the aspect ratio to

Letterbox, type [S4E0002.”

• All keys with functional names are initial-capped, set in bold type and enclosed in angle

brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>

and <Tab>.

• <Enter> indicates that you may press either the RETURN or ENTER key on your

computer keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used

to highlight important information, as in this example:

1. Introduction

A carriage return must be used after each command or string.

Note

Introduction

2 Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

Graphic Conventions: These symbols appear in numerous places throughout the

manual, to emphasize points that you must keep in mind to avoid problems with your

equipment or injury:

1.2

Using This Manual

Use the following table to locate the specific information you need in this manual.

TIPS highlight time-saving short cuts and helpful guidelines for using

certain features.

NOTES emphasize text with unusual importance or special

significance. They also provide supplemental information.

CAUTIONS alert users that a given action or omitted action can

degrade performance or cause a malfunction.

WARNINGS appear when a given action or omitted action can result

in damage to the equipment, or possible non-fatal injury to the user.

DANGER appears when a given action can cause severe injury or

death.

Tip

Note

Caution

WARNING

DANGER!

If you need... ... Turn to page:

Information about obtaining service iv

General information about the CX-40HD and

CX-46HD LCD Displays

Installation instructions 13

First-time configuration instructions 25

Advanced configuration instructions 42

Troubleshooting tips 49

Specifications for the CX-40HD and CX-46HD

LCD Displays

Introduction

Runco CX-40HD/CX-46HD Owner’s Operating Manual 3

PRE

IMINAR

1.3

Description, Features

and Benefits

Runco presents the Crystal Series CX-40HD and CX-46HD LCD Displays, perfect for

those who demand our award-winning flat panel performance in a more intimate size than

we offer with our larger plasma monitors. The Crystal Series LCD Displays are ideal for

close-in viewing where picture quality remains a high priority, but larger displays cannot be

accommodated.

The Crystal Series LCD Displays incorporate the superb Vivix™ digital video processing

that produces outstanding picture quality with a wide range of both standard and high

definition source material. In addition, the handsome, gloss black-finish television is

engineered with ISF™ calibration standards for the purest video performance.

The CX-40HD and CX-46HD LCD Displays also feature a built-in ATSC tuner that receives

terrestrial DTV broadcasts, in addition to an advanced, 185 channel, cable-ready NTSC

stereo tuner. The Crystal Series LCD Display offers PIP, PBP, closed captioning, Parental

Control (V-Chip) functionality and multi-language support. The display includes an

integrated stereo audio system incorporating surround sound technology with two-way

speakers and generous power amplification.

The advanced TFT active-matrix LCD display panel offers 1920 x 1080 resolution and

includes Runco’s discrete aspect ratio control with VirtualWide™ mode to fill the 16:9

screen with standard 4:3 images without loss of picture quality. Also included are discrete

source, aspect ratio and power selection and an RS-232 interface for whole-house or

automated control system integration.

The Crystal Series LCD Display is multimedia ready, with simple computer connections

making gaming, Internet browsing and other computer activities quick and easy.

Key Features and BenefitsThe Crystal Series LCD Display offers these key features and benefits:

• Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio)

• Multiple Aspect Ratios with VirtualWide™ Mode

• Less than 4 inches thin

• Two HDMI Inputs with High-bandwidth Digital Content Protection (HDCP)

• Built-in HDTV Tuner

• Exceptional detail and artifact-free video enhancement

• Runco video processing with 3:2 film detection circuitry

Introduction

4 Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

Parts List Your Crystal Series LCD Display is shipped with the following items. If any items are

missing or damaged, please contact your Runco dealer or Runco Customer Service at

(800) 23-RUNCO.

• CX-40HD or CX-46HD LCD Display (with Table Stand)

• Remote Control Unit and two (2), AAA-size batteries

• AC Power Cord

• Warranty information and registration card

• Runco CX-40HD/CX-46HD Owner’s Operating Manual (this document)

Optional Accessories:

• Wall Mount kit

➤

Runco CX-40HD/CX-46HD Owner’s Operating Manual 5

PRE

IMINAR

2.1

Crystal Series LCD

Display at a Glance

Controls and IndicatorsFigure 2-1 shows the locations of the Crystal Series LCD Display controls and indicators.

Figure 2-1. Crystal Series LCD Display Controls and Indicators

1. TV/AV Button (Input Source Selection)

2. MENU Selection Button

3. Volume Adjustment Buttons

4. Channel Selection Buttons

5. Power Button

6. Remote Control Sensor

7. Power Indicator

Lights red to indicate that the Crystal Series LCD Display is in standby mode; lights

green to indicate normal operation; flashes green when the Crystal Series LCD

Display receives a signal from the remote control.

8. Speakers

2. Controls and Functions

TV/AV

–

VOL

Right Side

8 8

Controls and Functions

6 Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

Crystal Series LCD Display

Inputs and Outputs

Figure 2-2 shows the locations of the Crystal Series LCD Display inputs and outputs.

Figure 2-2. Crystal Series LCD Display Rear-Panel Inputs and Outputs

1. INPUT2 Audio Input

2. INPUT2 Composite Video Input

Standard composite video input for connecting a VCR, camcorder, laser disc player

or other composite video source.

3. INPUT2 S-Video Input

Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS

(S-VHS) VCR.

4. Headphone Jack

5. Main Power Switch

6. Power Input (100 to 240 VAC)

Connect the Crystal Series LCD Display to power here.

7. RGB

A 15-pin VGA connection to a personal computer. The Crystal Series LCD Display

automatically detects the signal resolution.

8. HDMI1/Computer Input (Digital)

➤

Rear

INPUT2

INPUT4

INPUT3

INPUT4

INPUT3

INPUT1

S-VIDEO

VIDEO

Audio

Right Side

Controls and Functions

Runco CX-40HD/CX-46HD Owner’s Operating Manual 7

PRE

IMINAR

9. HDMI2/Computer Input (Digital)

Two, HDCP-compliant digital video inputs for connecting a DVD player, personal

computer or HD tuner with a DVI or HDMI output.

10. PC Audio Input

Connect the audio output from a personal computer here.

11. INPUT3 Component Video (RCA connectors)

Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component

input. This is the input for component video from sources such as DVD players.

12. INPUT3 Composite Video Input

13. INPUT3 Audio Input

Connect the audio output from your Input 3 source here.

14. INPUT4 Component Video (RCA connectors)

Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component

input. This is the input for component video from sources such as DVD players.

15. INPUT4 Composite Video Input

16. INPUT4 Audio Input

Connect the audio output from your Input 4 source here.

17. INPUT1 Composite Video Input

18. INPUT1 Audio Input

Connect the audio output from your Input 1 source here.

19. INPUT1 S-Video Input

20. AV-OUT (Composite Video)

21. AV-OUT (Audio)

22. DIGITAL AUDIO OUT (S/PDIF – Coaxial)

23. DIGITAL AUDIO OUT (TosLink – Optical)

Connect either #22 or #23 to the digital audio input of an A/V amplifier with a Dolby

Digital

decoder.

24. AIR (Antenna) Input

75-ohm coaxial input for connecting a TV antenna to the digital TV input.

25. CABLE Input

75-ohm coaxial input for connecting a CATV system to the digital TV input.

26. RS-232 CONTROL PORT

A female, 9-pin D-sub connector for interfacing with a PC or home theater

automation/control system.

27. SPEAKER OUTPUT (RIGHT)

28. SPEAKER OUTPUT (LEFT)

For connection of the right (27) left (28) speakers. Connect a speaker with an

impedance of 4 ohms.

For best results, do not run your DVD player in progressive mode.

Tip

Controls and Functions

8 Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

2.2

Crystal Series LCD

Display Remote

Control

Figure 2-3 shows the Crystal Series LCD Display remote control, and the paragraphs that

follow describe its functionality.

Figure 2-3. Crystal Series LCD Display Remote Control

–

12 3

HDMI2HDMI1

RGB

SLEEP

MEMORY

HOLD

SUB PAGE

CANCEL

TEXT

REVEAL

SIZE

MIX

INDEX

EXIT

ENTER

INPUT

78 9

ASPECT SIZE POSITION PIP

SWAP TV/AVS.SWAP

OFF ON

INPUT

CUST

ISF

DAY

ANA 4X3

ASPECT RATIO

LET

BOX

VWIDE

CHANNEL DOWN

CHANNEL UP

VOL +

VOL -

FAV

CHAN

INFO

S.MODE SURRND

MTS/SAP

MUTE

SOURCE

TIMER

OFF

Controls and Functions

Runco CX-40HD/CX-46HD Owner’s Operating Manual 9

PRE

IMINAR

1. OFF / ON

Use these buttons to turn the Crystal Series LCD Display on or off.

2. Numeric Buttons

Use these buttons to enter TV channel numbers or menu pass codes. Use the TV

button to switch to the Antenna/DTV/CATV input. Use the

- button to enter DTV

sub-channel numbers.

3. Source Selection Buttons

INPUT 1

Press this button to switch to Input 1.

INPUT 2

Press this button to switch to Input 2.

INPUT 3

Press this button to switch to Input 3.

INPUT 4

Press this button to switch to Input 4.

HDMI 1 / HDMI 2

Use these buttons to select a Digital Video input (HDMI 1 or HDMI 2).

RGB HD

Press this button to switch to the RGB HD input.

4. Memory Preset Buttons

CUST

Press to recall settings for the current input from the “Custom” memory preset.

ISF NT (Night)

Press to recall settings for the current input from the “ISF Night” memory preset.

ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

Input 1 and Input 2 have both S-Video and composite video

connectors. Input 3 and Input 4 have both component and

composite video connectors.

To specify which connection type you are using – or to switch from

one to the other if equipment is connected to both – use the Input

Selection menu under Setup (refer to Input Selection on page 40).

Note

Controls and Functions

10 Runco CX-40HD/CX-46HD Owner’s Operating Manual

PRE

IMINAR

5. Aspect Ratio Selection Buttons

ANA (16:9 Anamorphic)

For 16:9 DVDs or HDTV program material.

4X3 (Standard 4:3)

The input signal is scaled to fit 4:3 display mode in the center of the screen.

LETBOX (Letterbox)

Image in letterbox format is enlarged to fit 16:9, full-screen display and the

upper/lower portions are “blanked off.”

VWIDE (VirtualWide)

4:3 image is enlarged NON-linearly in horizontal direction to fit 16:9 full screen display.

6. Arrow Buttons ( , , , )

Use these buttons to select items or settings, adjust settings, change TV channels or

adjust sound volume.

ENTER

Press to select a highlighted menu item or confirm a changed setting.

7. MENU

Press this button to access the on-screen display (OSD) controls, or to exit the

current menu and return to the previous one.

8. EXIT

Press this button to hide the OSD controls, or display program information (when

available) if the OSD controls are already hidden.

9. Picture-In-Picture (PIP) Function Buttons

ASPECT

Press to change the aspect ratio of the PIP window from 4:3 to 16:9 or vice versa.

SIZE

Press to choose from three PIP window sizes.

POSITION

Press to choose the PIP window position (top left, top right, bottom left or bottom

right corner).

PIP

Press to change the PIP mode (picture-in-picture, picture-by-picture or off).

P. M O DE

Press to recall settings for the PIP input from either the “ISF Night” or “ISF Day”

memory preset.

S.SWAP

Press to switch between the main and PIP audio programs.

SWAP

Press to swap the main and PIP windows.

TV/AV

Press to switch to a different PIP video source.

Page is loading ...

Runco CX-46HD User manual

Brand: Runco

Model: CX-46HD

Category: TVs & monitors

Type: User manual

This manual is also suitable for

CX-40HD

Download PDF

report

Runco CX-46HD User manual

This manual is also suitable for

Runco CX-46HD User manual

Related papers

Other documents