2. Vehicles & accessories
  3. Motor vehicle accessories & components
  4. Motorcycle Accessories
  5. BrickHouse Security
  6. LYSB019OWIAXS-ELECTRNCS

BrickHouse Security LYSB019OWIAXS-ELECTRNCS Installation guide

  • Hello! I am an AI chatbot trained to assist you with the BrickHouse Security LYSB019OWIAXS-ELECTRNCS Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
BrickHouseSecurity.com
Livewire 4
Wiring Guide
Notes on TXD and RXD (Advanced Installation)
TXD signal is an output on a DTE device and an input on a DCE
device. Similarly, RXD is an output on a DCE device and input on
a DTE device.
Wiring KeyPin Layout From Device
Basic Installation
Just three wires are needed for this installation.
1 2 3 4 5 6 7
Pin Wire Color Discription
7 Black Ground
6 Green Output 2
5 Yellow Output 1/Input
4 White Ignition Detection
3 Red 12v Power Input
2 Gray TXD
1 Orange RXD
Pin Wire Color Connection
7 Black Run to Ground
4 White Run to Iginition
3 Red Run to 12v Power
Pin Wire Color Connection
7 Black Run to Ground
6 Green Output 2
5 Yellow Output 1/Input
4 White Run to Ignition (Connect to Run Part)
3 Red Run to 12v Power
2 Gray TXD
1 Orange RXD
Livewire 4
Livewire 4
Advanced Installation
STOP - Advanced installation not required for regular
GPS tracking. Please contact us before attempting any
custom installations.
/