Quasar SQ4044 User manual

Brand: Quasar

Model: SQ4044

Type: User manual

Instructions

EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE

ANTENNALEADIN WIRE

ANTENNA

DISCHAGRE UNIT

(NEC SECTIO N 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250,RARTH)

GROUND

CLAMP

ELEC TRIC SERVICE

EQUIPMENT

NEC-NATIONAL ELECTRICAL CODE

S2898A

27) Explanation of symbol, marking, signal lamp or similar means indicate that apparatus

is completely disconnected from the mains. This equipment is a Class II or double

insulated electrical appliance. It has been designed in such a way that it does not require a

safety connection to electrical earth.

28) Correct Disposal of this product. This marking indicates that this product should

not be disposed with other household wastes throughout the EU. To prevent possible harm

to the environment or human health from uncontrolled waste disposal, recycle it responsibly

to promote the sustainable reuse of material resources. To return your used device, please

use the return and collection systems or contact the retailer where the product was purchased.

26) Where the mains plug is used as the disconnect device, the disconnect device shall

remain readily operable.

Instructions

Warning: batteries(pack or batteries installed) should not be exposed to excessive heat

such as sunshine, fire or other heat sources.

Instructions

A wall mount kit (purchased separately) would allow you to mount your

Quasar TV on the wall. For detailed information on installing the wall mount,

refer to the instructions provided by the wall mount manufacturer. It is

strongly recommended to contact a technician for professional assistance

for wall mount installation. Quasar is not responsible for any damage to the

product or injury to yourself or others resulting from the wall-mounting.

Instruction for Wall Mount

This TV is compatible with a 200mm x 100mm mounting hole pattern.

4 pcs of type M6 screws are required for installing the wall mount bracket

to your TV. Do not use screws that are longer than 10 mm. Screws that are

too long may cause damage to the inside of the TV set.

Do not fasten the screws too tight for this may damage the TV or cause the

TV to fall, resulting in personal injury. Quasar is not liable for these kinds

of incidents.

Do not mount your TV at more than a 15 degree tilt.

Always use two people to mount the TV to a wall.

Do not install your Wall Mount Kit while your TV is turned on. It may result

in personal injury due to electric shock.

TABLE OF CONTENTS

Instructions

Logos & Licenses

Picture Menu

Media

Logos & Licenses

TV Buttons and Connections

TV Buttons

:Turn ON/OFF Power.

SOURCE:External Signal Input Selection.

MENU:Display Main MENU And Confirm MENU Item Selection.

CH+/-:Select Channel.

VOL+/-:Adjust Volume.

Connections

HDMI(1-3) Input

Connect to a HDMI output

connection on your external device.

ANT 75/RF Connection

Connect to the antenna/cable TV

output of your device or wall plate.

VGA Input

Connect to your PC using a VGA

cable(not provided).

PC Audio Input

Connect to your PC Audio Out

using 1/8 line cord.

HEADPHONE JACK

Plug earphones into jack for private

listening. Overrides speakers.

Output

Audio Out Right/Left

Connect to your external device.

OPTICAL

Digital Audio Output.

OPTICAL

OUTPUT

HDMI

HEADPHONE

USB

INPUT

Input

Audio in Right/Left

Connect to your external device.

VIDEO/Y

Pb Pr

Component Input / Video Input

Connect to a component or AV

output connection on your

external device.

USB Input

Connect to your USB device.

AC 120V~ 60Hz

VIDEO/Y

Pb Pr

OUTPUT

HEADPHONE

OPTICAL

Side Terminal

Down Terminal

VIDEO/Y Pb Pr

Component (Y,Pb,Pr) input connection

VIDEO/Y Pb Pr

5V 0.5A

/ Power saving

Power saving Produces a lower power consumption mode.

Page is loading ...

Quasar SQ4044 User manual

Quasar SQ4044 User manual

Related papers

Other documents