Ronda startech Technical Instructions

startech
Ronda
Brand
Ronda
Model
startech
Type
Technical Instructions

This manual is also suitable for

Ronda Startech, your new timekeeping companion, offers a range of features to enhance your daily routine. With its precise quartz movement, you can rely on accurate timekeeping. The sleek design complements any style, making it a versatile accessory for both formal and casual occasions. Ronda Startech is water-resistant, so you don't have to worry about splashes or rain affecting its performance.

Ronda Startech, your new timekeeping companion, offers a range of features to enhance your daily routine. With its precise quartz movement, you can rely on accurate timekeeping. The sleek design complements any style, making it a versatile accessory for both formal and casual occasions. Ronda Startech is water-resistant, so you don't have to worry about splashes or rain affecting its performance.

Technical instructions 8040.N
10/2013 M RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] 1
2000.700.CO Main plate
1.
3406.038 Pusher jumper A
2.
Put the yellow jumper between the two posts on the closer side.
3406.030 Pusher jumper B
3.
Put the grey jumper between the two posts on the further side.
3305.364.CO Canon pinion (Aig.1)
4.
A
2030.029 Center bridge
5.
Center bride held by 2 screws 4000.250.
4000.250 Screw
6.
3406.040 Friction spring
7.
Friction spring held by 1 screw 4000.250.
4000.250 Screw
8.
3622.055 Stator
9.
3622.054 Stator chrono
10.
Mark |1| on stator.
3715.119.RK Rotor
11.
3715.119.RK Rotor
12.
B
3147.073.CO Intermediate wheel
13.
3147.074.CO Intermediate wheel chrono
14.
3122.067.CO Third wheel
15.
3136.180.CO Chronograph wheel
16.
3136.179.CO Second wheel
17.
3136.178.CO Small second wheel
18.
3004.203.CO Reverse wheel
19.
C
Technical instructions 8040.N
10/2013 M RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] 2
2020.188.G Train wheel bridge
20.
Train wheel bridge held by 2 screws 4000.250.
4000.250 Screw
21.
3622.039 Stator counter (cpt 6h and 9h and chrono)
22.
3402.012.CO Minute counting wheel (30min)
23.
3715.120.RK Rotor
24.
3147.076.CO Intermediate wheel (counter 30min)
25.
D
2020.191.G Counter train wheel Bridge (2h30)
26.
Train wheel bridge held by 2 screws 40000.250. Mark |2|.
4000.250 Screw
27.
3622.039 Stator counter
28.
3402.013.CO Counting wheel (1/10 s)
29.
3715.120.RK Rotor
30.
3147.075.CO Intermediate wheel (counter 1/10 s)
31.
2020.190.G Counter train wheel bridge
32.
Train wheel bridge held by 2 screws 40000.250. Mark |1|.
4000.250 Screw
33.
E
3016.029 Stop lever
34.
Stop lever held by 1 screw 4000.249.
4000.249 Screw
35.
2130.222 Maintaining plate
36.
Maintaining plate held by 1 screw 4000.248.
4000.248 Screw
37.
F
Technical instructions 8040.N
10/2013 M RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] 3
3621.072.RK Coil centre
38.
Attention: Please hold the coil only on the grey coil core.
3621.055.RK Coil counter
39.
Attention: Please hold the coil only on the grey coil core.
3621.055.RK Coil counter
40.
Attention: Please hold the coil only on the grey coil core.
3621.055.RK Coil counter
41.
Attention: Please hold the coil only on the grey coil core.
4000.250 Screw
42.
G
3603.089 Battery insulator
43.
3601.134 Pusher contact spring
44.
3612.218 Electronic module
45.
Electronic module held by 6 screws.
4000.248 Screw
46.
4 screws 4000.248 for pressing the module on the coils.
4000.250 Screw
47.
2 screws 4000.248 for pressing the module on the 2 posts.
3601.132.G Lateral bridle
48.
Lateral bridle held by 1 screw 4000.250.
4000.250 Screw
49.
H
3603.090 Circuit insulator
50.
2130.206.G.M01.8040N Electronic module cover
51.
Electronic module cover held by 4 screws 4000.250.
4000.250 Screw
52.
3600.010.HGF Battery 395
53.
3601.133.G Bridle +
54.
Bridle + held by 2 screws 4000.250.
4000.250 Screw
55.
I
Technical instructions 8040.N
10/2013 M RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] 4
2000.700.CO Main plate
56.
.
J
3017.054.CO Setting lever
57.
3001.046 Sliding pinion
58.
3015.088 Yoke (3 positions)
59.
3905.063 Setting lever jumper
60.
Lever held by 1 screw 4000.282.
4000.282 Screw
61.
K
3004.200 Corrector setting wheel
62.
3004.200 Corrector setting wheel
63.
3015.087.CO Setting wheel yoke
64.
L
Technical instructions 8040.N
10/2013 M RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] 5
2130.208 Setting mecanism cover
65.
Setting meca cover held by 4 screws 4000.305.
4000.305 Screw
66.
3000.203.CO Setting stem
67.
3004.222 Intermediate setting wheel
68.
3007.079.CO Minute wheel
69.
2130.209 Minute train bridge
70.
Minute train bridge held by 3 screws 4000.278.
4000.278 Screw
71.
M
2000.672.G Main plate retro
72.
Minute plate retro held by 4 screws 4000.248.
4000.248 Screw
73.
N
3004.220 Tens indicator driving wheel
74.
The short tooth of the tens indicator driving wheel must point to the
center of the movement.
3500.072 Tens jumper
75.
2130.187 Tens jumper maintaining plate
76.
Tens jumper maintaining plate held by 2 screws 4000.279. Tensioning
the spring arm.
4000.279 Screw
77.
3301.292.CO Hour wheel
78.
3004.208.CO Date indicator driving wheel
79.
3147.061 Intermediate date wheel
80.
O
Technical instructions 8040.N
10/2013 M RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] 6
3404.006.CO Day cam
81.
Place parts as shown on graphics.
3406.032 Day rack
82.
3406.031 Day rack lever
83.
3147.066.CO Date corrector setting wheel
84.
3507.059.CO Date corrector wheel
85.
P
2130.191 Date indicator plate
86.
3905.068 Date corrector spring
87.
Date corrector spring held by 1 screw 4000.244.
4000.244 Screw
88.
3905.066 Day rack lever spring
89.
Tensioning the spring arm.
3500.068 Date jumper
90.
3500.069 Day jumper
91.
Tensioning the spring arm.
Q
Technical instructions 8040.N
10/2013 M RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] 7
3504.234.AD.1.A Units indicator (standard)
92.
Nick of the indicator at 3 o`clock.
2130.192 Date indicator maintaining plate
93.
Date indicator maintaining plate held by 1 screw4000.250.
4000.250 Screw
94.
3905.064 Date jumper spring
95.
Insert the date jumper spring in the previous opening.
3907.047 Day finger flange
96.
Stem pos III: Turn crown forwards until the date jumps. Stem pos II:
Move the date until the nick is at 3 o`clock.
3004.211 Day finger
97.
Position the end of the teeth against the day came pinion while turning
softly in counterclockwise direction.
3004.212 Days driving wheel
98.
Insert the tooth of the wheel in the flange gap, while turning softly in
counterclockwise direction to ensure correct position of the day finger.
3401.086.FI Day indicator pinion
99.
3147.062 Tens intermediate wheel
100.
Arrow positioning radially outwards.
3504.231.AD.1.A Tens indicator (standard)
101.
Nick of the indicator at 3 o`clock.
3315.003 Friction spring
102.
2130.193.G Date mecanism maintaining plate
103.
Date maca maintaining plate held by 3 screws 4000.320.
4000.320 Screw
104.
3506.077.G Intermediate Dial support
105.
Polished version first.
3506.076.G Dial support
106.
8200 Moebius 8200
107.
9014 Moebius 9014
108.
124 Jismaa 124
109.
9020 Moebius 9020
110.
R
S
10/2013 RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] EM 1
Electronic measurements
8040.N
Battery
395
Voltage
1.55 V
Setting stem in p
osition I, calendar not in gear,
60 s measur
ing interval for rate and consumption:
Typ
ical consumption
Maximal
consumption
1.48 µA
2.00 µA
Rate
-10s/M. .. +20s/M.
Lower working voltage limit
1.20 V
H
old down the electrical module to allow the electronic
flow.
Setting stem in position
III, 60 s measuring interval:
Typical consumption
Maximal consumption
0.10 µA
0.30 µA
10/2013 RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected] EM 2
Electronic measurements
8040.N
Coil resistance
M1
1.50 kΩ .. 1.70 kΩ
Coil resistance
M2
1.68 kΩ .. 1.88 kΩ
Coil resistance
M3
1.68 kΩ .. 1.88 kΩ
Coil resistance
M4
1.68 kΩ .. 1.88 kΩ
Coil
isolation M1/M2/M3/M4
∞ kΩ
Signal generator
(4.9 ms, 8 Hz):
Lower working voltage
limit
M2/M3/
M4
1.20 V
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Ronda startech Technical Instructions

startech
Ronda
Brand
Ronda
Model
startech
Type
Technical Instructions
This manual is also suitable for

Ronda Startech, your new timekeeping companion, offers a range of features to enhance your daily routine. With its precise quartz movement, you can rely on accurate timekeeping. The sleek design complements any style, making it a versatile accessory for both formal and casual occasions. Ronda Startech is water-resistant, so you don't have to worry about splashes or rain affecting its performance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents