RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy
.
W
e’
d love to hear your comments
. Please call the Mar
keting Depar
tment at 888-RAB-1000 or email:
[email protected]INSTRUCTIONS
T34® PANEL 2X2, 2X4 INSTALLATION
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
T34 2X2 T34 2X4
Grid Clips (up and out as shown in
Fig. 1)
Fixture
Tee-Grid Bar
FixtureTee-Grid Bar.
Fixture Support Wires (supplied
by others) Grid Clip Hole
Splice BoxAccess
Plate
Access Plate Screw Access Plate
Conduit KnockoutsAccess Plate
(Fig. 4)
(Fig. 5).
Splice Box
WARNING: To prevent wiring
damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects.
Access Plate Access Plate Screw
Fixture Firmly bend Grid
Clips up and out
Support Wire
(supplied by others)
Grid Clip Hole
Splice Box
Grid Clip (4)
Access Plate Screw
Tee-Grid Bar
Access Plate Conduit Knockouts