2. Ridetech
  3. 11009406

Ridetech 11009406 Operating instructions

  • Hello! I've reviewed the Installation Instructions for the ridetech 65-72 Galaxie Billet Tie Rod Adjuster. This document details the installation process, emphasizing the importance of using antisieze compound and ensuring proper thread engagement using the provided sight hole. I am ready to address any questions you have about this document and the Tie Rod Adjuster.
  • What is the purpose of the Tie Rod Adjuster?
    How can I identify the left-hand threaded side?
    What should I use on the threads when installing the Tie Rod Adjuster?
    How much thread engagement is needed?
    How can I ensure proper thread engagement?
1812-482-2932
Installation
Instructions
Recommended Tools
www.ridetech.com
Part # 11009406 - 65-72 Galaxie Billet Tie Rod Adjuster
Major Components .....In the box
QTY Part Number Description
2 90000728 Tie Rod Adjuster
2 99800002 5/8”-18 Right Hand Jam Nut
2 99800003 5/8”-18 Left Hand Jam Nut
NOTES:
This Tie Rod Adjuster is designed to take place of the OEM steel sleeve.
One end of the adjuster has a groove cut in it, this is the LEFT HAND threaded side.
When installing the Tie Rod Adjuster, use antisieze compound on the threads.
FOR YOUR SAFETY, THE TIE RODS NEED A MINIMUM 15/16” OF THREAD ENGAGEMENT INTO THE
TIE ROD ADJUSTER. USE THE SIGHT HOLE IN THE SIDE OF THE TIE ROD ADJUSTER TO ENSURE
PROPER THREAD ENGAGEMENT.
REV2 5/15/23
/