Vecow VAC-1000 User manual

USER

Manual

USER

Manual

1.1.0 Edition 20220525

Arm-based Edge AI Computing System

24-core Foxconn Cortex-A53 MPU with AI Accelerator Card

VAC-1000

ii

©Vecow VAC-1000 User Manual

Version Date Page Description Remark

1.00 2021/08/24 All Ocial Release

1.10 2022/05/25 iv,1,3,4,5,6,51,53 Update

Record of Revision

iii

©Vecow VAC-1000 User Manual

This manual is released by Vecow Co., Ltd. for reference purpose only. All

product oerings and specications are subject to change without prior notice.

It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable

for direct, indirect, special, incidental, or consequential damages arising out of

the use of the product or documentation or any infringements upon the rights of

third parties, which may result from such use.

Disclaimer

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy, and if it is not installed and used

in accordance with the instruction manual, it may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

FCC

The products described in this manual complies with all applicable European

Union (CE) directives if it has a CE marking. For computer systems to

remain CE compliant, only CE-compliant parts may be used. Maintaining CE

compliance also requires proper cable and cabling techniques.

CE

Declaration of Conformity

This document contains proprietary information protected by copyright. No part

of this publication may be reproduced in any form or by any means, electric,

photocopying, recording or otherwise, without prior written authorization

by Vecow Co., Ltd. The rights of all the brand names, product names, and

trademarks belong to their respective owners.

Copyright and Trademarks

iv

©Vecow VAC-1000 User Manual

Order Information

Part Number Description

VAC-1000-W16E

VAC-1000, 24-core Foxconn Cortex-A53 MPU, Lightspeeur® AI

Accelerator Card, 16G WT DDR4 ECC RAM, 1 GigE LAN, 1 IPMI, 2

USB 3.0, 1 SSD, 1 M.2, 9V to 55V DC-in, -40°C to 70°C

VAC-1000-16E

VAC-1000, 24-core Foxconn Cortex-A53 MPU, Lightspeeur® AI

Accelerator Card, 16G DDR4 ECC RAM, 1 GigE LAN, 1 IPMI,

2 USB 3.0, 1 SSD, 1 M.2, 9V to 55V DC-in, 0°C to 55°C

VAC-1100-W16E

VAC-1100, 24-core Foxconn Cortex-A53 MPU, Hailo AI Accelerator

Card, 16G WT DDR4 ECC RAM, 1 GigE LAN, 1 IPMI, 2 USB 3.0,

1 SSD, 1 M.2, 9V to 55V DC-in, -40°C to 70°C

VAC-1100-16E

VAC-1100, 24-core Foxconn Cortex-A53 MPU, Hailo AI Accelerator

Card, 16G DDR4 ECC RAM, 1 GigE LAN, 1 IPMI, 2 USB 3.0,

1 SSD, 1 M.2, 9V to 55V DC-in, 0°C to 55°C

Optional Software

Part Number Description

NX Witness VMS Network Optix IP Video Management System (VMS) and Video

Surveillance Software

v

©Vecow VAC-1000 User Manual

Part Number Description

PWA-60WP3-WT 60W, 24V, 90V AC to 264V AC Power Adapter with 3-pin

Terminal Block, Wide Temperature -30°C to +70°C

PWA-60WP3-WT-12V 60W, 12V, 90V AC to 264V AC Power Adapter with 3-pin

Terminal Block, Wide Temperature -30°C to +70°C

DIN-RAIL DIN Rail Kit for VAC-1000

M.2 Storage Module M.2 Key M PCIe Storage Module

Optional Accessories

vi

©Vecow VAC-1000 User Manual

Table of Contents

CHAPTER 1 GENERAL INTRODUCTION 1

1.1 Overview 1

1.2 Features 2

1.3 Product Specication 3

1.3.1 Specications of VAC-1000 3

1.3.2 Specications of VAC-1100 5

1.4 Mechanical Dimension 7

CHAPTER 2 GETTING TO KNOW YOUR VAC-1000/1100 8

2.1 Packing List 8

2.2 Front Panel I/O & Functions 9

2.3 Main Board Connectors & Jumper Locations 12

CHAPTER 3 SYSTEM SETUP 22

3.1 How to Open Your VAC-1000/1100 22

3.2 Installing DDR4 SO-DIMM Module 23

3.3 Installing M.2 26

3.4 Installing SSD/HDD 27

3.5 Mount Your VAC-1000/1100 29

CHAPTER 4 SOFTWARE SETUP 32

4.1 Connecting to VAC-1000/1100 32

4.2 User Account Management 33

4.3 Network Settings 35

4.4 System Administration 36

4.5 Determining Available Driver Space 38

4.6 Shutting Down the Device 38

4.7 USB External Storage 39

4.8 IPMI Operations 40

vii

©Vecow VAC-1000 User Manual

APPENDIX A : AI Module Guide 43

APPENDIX B : Power Consumption 51

APPENDIX C : Supported Memory & Storage List 53

1

©Vecow VAC-1000 User Manual GENERAL INTRODUCTION

GENERAL INTRODUCTION

1.1 Overview

VAC-1000 Series is an Arm-based Edge AI Computing System. Powered by

24-core Foxconn Cortex-A53 MPU, running with Hailo-8™/Lightspeeur® AI

accelerator card, VAC-1000 series delivers improved eciency and integration

for broad adoption of the latest IoT Edge computing solutions.

VAC-1000 Series is a compact design yet provides mighty configurations. It

features simplified I/O interfaces including 1 GigE LAN, 1 IPMI, 2 USB 3.0, 1

Micro USB and equipped with 1 SATA and 1 M.2 form factor storage. With 9V to

55V wide range DC-in and -40°C to 70°C operating temperature supported, the

fanless VAC-1000 Series provides industrial-grade trusted reliability.

With up to 16GB DDR4 2133 memory and optional NX Witness VMS (Video

Management System) supported, VAC-1000 provides a server-grade computing

capability. Furthermore, VAC-1000 Series supports mainstream deep learning

framework such as TensorFlow, ONNX, Caffe and PyTorch for AI-enabled

vision applications, providing a comprehensive solution optimized for Public

Surveillance, Traffic Vision, Smart Retail, Factory Automation and any AIoT/

Industry 4.0 applications.

1

2

©Vecow VAC-1000 User Manual GENERAL INTRODUCTION

1.2 Features

• 24-core Foxconn Cortex-A53 Server-grade Computing

• Advanced AI Accelerator supports up to 26 Tera-Operations Per Second (TOPS)

• 1 DDR4 2133MHz Memory with ECC, support up to 16GB

• 9V to 55V wide range DC Power Input

• 1 GigE LAN, 1 IPMI, 2 USB 3.0, 1 Micro USB

• M.2 Key M 2280 for PCIe NVMe SSD

• Support Cross-Platform IP video management system (VMS) for real-time

surveillance

3

©Vecow VAC-1000 User Manual GENERAL INTRODUCTION

1.3 Product Specication

1.3.1 Specications of VAC-1000

System

Processor 24-core Arm Cortex-A53 Processor (Foxconn FXN3102)

Memory 1 DDR4 2133MHz/16GB ECC SO-DIMM

Flash 1 SPI Flash, 512MB

EEPROM 1 SPI EEPROM, 512KB

OS Ubuntu Server 18.04 LTS

AI Accelerator

Processor Lightspeeur® 2801S Neural Accelerator, up to 5.6 TOPS

Framework TensorFlow, Cae, PyTorch

I/O Interface

USB 2 USB 3.0 Type A

Micro USB • 1 Micro USB console port for debug (External)

• 1 Micro USB console port for firmware update (Internal)

LED Power, SSD

Storage

SATA 1 SATA III (6Gbps)

M.2 1 M.2 Key M Socket (2280, PCIe)

eMMC 1 64GB eMMC, supports MMC4.41/HS200

Ethernet

LAN 10/100/1000 Base-T Ethernet GigE LAN, RJ45 connector

IPMI 10/100/1000 Base-T Ethernet IPMI, RJ45 connector

Power

Power Input 9V to 55V, DC-in

Power Interface 3-pin Terminal Block : V+, V-, Frame Ground

Software

Operating System

Ubuntu Server 18.04LTS(Linux kernel 4.14.0)

Supports bootup from Flash drive/eMMC

Supports backup from Flash drive

File System : EXT4

Toolchain gcc-linaro-6.4.1-2017.11-x86_64_aarch64-linux-gnu

Script Language Python

Mechanical

Dimensions 170mm x 118mm x 40mm (6.7" x 4.6" x 1.6")

Weight 0.9 kg (2.0 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

4

©Vecow VAC-1000 User Manual GENERAL INTRODUCTION

Environment

Operating Temperature VAC-1000-W16E : -40°C to 70°C(-40°F to 158°F)

VAC-1000-16E : -0°C to 55°C (32°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 55°C

Shock • IEC 60068-2-27

• SSD : 50G @ wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

5

©Vecow VAC-1000 User Manual GENERAL INTRODUCTION

1.3.2 Specications of VAC-1100

System

Processor 24-core Arm Cortex-A53 Processor (Foxconn FXN3102)

Memory 1 DDR4 2133MHz/16GB ECC SO-DIMM

Flash 1 SPI Flash, 512MB

EEPROM 1 SPI EEPROM, 512KB

OS Ubuntu Server 18.04 LTS

AI Accelerator

Processor Hailo-8™ AI Processor, up to 26 TOPS

Framework TensorFlow, ONNX

I/O Interface

USB 2 USB 3.0 Type A

Micro USB • 1 Micro USB console port for debug (External)

• 1 Micro USB console port for firmware update (Internal)

LED Power, SSD

Storage

SATA 1 SATA III (6Gbps)

M.2 1 M.2 Key M Socket (2280, PCIe)

eMMC 1 64GB eMMC, supports MMC4.41/HS200

Ethernet

LAN 10/100/1000 Base-T Ethernet GigE LAN, RJ45 connector

IPMI 10/100/1000 Base-T Ethernet IPMI, RJ45 connector

Power

Power Input 9V to 55V, DC-in

Power Interface 3-pin Terminal Block : V+, V-, Frame Ground

Software

Operating System

Ubuntu Server 18.04LTS(Linux kernel 4.14.0)

Supports bootup from Flash drive/eMMC

Supports backup from Flash drive

File System : EXT4

Toolchain gcc-linaro-6.4.1-2017.11-x86_64_aarch64-linux-gnu

Script Language Python

Mechanical

Dimensions 170mm x 118mm x 40mm (6.7" x 4.6" x 1.6")

Weight 0.9 kg (2.0 lb)

Mounting • Wallmount by mounting bracket

• DIN Rail Mount (Optional)

6

©Vecow VAC-1000 User Manual GENERAL INTRODUCTION

Environment

Operating Temperature VAC-1100-W16E : -40°C to 70°C(-40°F to 158°F)

VAC-1100-16E : -0°C to 55°C (32°F to 131°F)

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Humidity 5% to 95% Humidity, non-condensing

Relative Humidity 95% at 55°C

Shock • IEC 60068-2-27

• SSD : 50G @ wallmount, Half-sine, 11ms

Vibration • IEC 60068-2-64

• SSD : 5Grms, 5Hz to 500Hz, 3 Axis

EMC CE, FCC, EN50155, EN50121-3-2

7

©Vecow VAC-1000 User Manual GENERAL INTRODUCTION

1.4 Mechanical Dimension

70.0 (2.76)

110.0 (4.33)

118.0 (4.65)

170.0 (6.69)

185.0 (7.28)

200.0 (7.87)

40.0 (1.57)

41.0 (1.61)

Unit : mm (inch)

8

©Vecow VAC-1000 User Manual GETTING TO KNOW YOUR VAC-1000/1100

2

GETTING TO KNOW YOUR VAC-1000/1100

2.1 Packing List

Item Description Qty

1

VAC-1000 Arm-based Edge AI Computing System

(According to the conguration of you order, VAC-1000 series may

contain SSD/HDD and M.2. Please verify these items if necessary.)

1

Item Description Outlook Usage P/N Qty

1Terminal block

3-pin (5.0mm) DC-IN 51-2411R03-S1K 1

2SATA Cable SSD/HDD 61-13C2211-366 1

3

PHILLPIS

M3 x 4L,

Ni + Ny

M.2 module

card 53-2426204-80B 2

4Flat M3x4L

Wall Mount

Bracket and

SSD/HDD

53-M000450-301 8

5Wall Mount

Bracket Mount 62-03P0834-000 2

9

©Vecow VAC-1000 User Manual GETTING TO KNOW YOUR VAC-1000/1100

2.2 Front Panel I/O & Functions

In Vecow VAC-1000 series, all I/O connectors are located on the front panel.

Most of the general connections to computer devices, such as USB, LAN, IPMI,

Console port and LED indicators are placed on the front panel.

2.2.1 Power Terminal Block

VAC-1000 supports 9V to 50V DC power input.

Pin No. Denition

1V+

2V-

3 Chassis Ground

2.2.2 USB 3.0

There are two USB 3.0 connections available supporting up to 5GB per second

data rate in the front side of VAC-1000. It also compliant with the requirements

of Super Speed (SS), high speed (HS), full speed (FS) and low speed (LS).

10

©Vecow VAC-1000 User Manual GETTING TO KNOW YOUR VAC-1000/1100

2.2.3 10/100/1000 Mbps Ethernet Port

There are two 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet

connections in the front side of VAC-1000. LAN port and IPMI port both are

powered by RTL8211FI-CG Ethernet engine. The pin out of LAN and IPMI are

listed in the following chart :

Pin No. 10/100 Mbps 1000Mbps

1E_TX+ MDI0_P

2E_TX- MDI0_N

3 E_RX+ MDI1_P

4----- MDI2_P

5----- MDI2_N

6 E_RX- MDI1_N

7 ----- MDI3_P

8------ MDI3_N

Each LAN port is supported by a standard RJ-45 connector with LED indicators to

present active/link/speed statuses of the connection. The LED indicator on the left top

corner becomes twinkling yellow when the cable is properly connected to a 100Mbps

Ethernet network; the LED indicator on the right top corner becomes twinkling green

when the cable is properly connected to a 1000Mbps Ethernet network.

LED Location LED Color 10Mbps 100Mbps 1000Mbps

Left Yellow O Twinkling

Yellow O

Right Green O O Twinkling

Green 18

11

©Vecow VAC-1000 User Manual GETTING TO KNOW YOUR VAC-1000/1100

2.2.4 Console Port

System COM Port, Micro USB to UART that connects to the Cortex-A53 serial port.

2.2.5 Power and Status LED Indicators

Yellow (HDD LED) : SATA hard drive LED. If the LED is on, it indicates that the

system's storage is functional. If it is o, it indicates that the system's storage is

not functional. If it is ﬂashing, it indicates data access activities are in progress.

Green (Power LED) : If the LED is solid green, it indicates that the system is

powered on.

LED Color Power Status System Status

Yellow HDD On/O : Storage status, function or not. Twinkling :

Data transferring.

Green Power System power status (on/o)

12

2.3 Main Board Connectors & Jumper Locations

Top view :

Bottom view :

20

L4

G

L3

O

L2

L1

YL4 G

L3

O

L2

L1

Y

CN1

SW3 SW2 SW1SW2

SYS_FAN1

SATA1

SATA_PWR1

CN3

CN2

JPWR

JHDD

CN6

JRESET1 1812_UART1

RSV_I2C1

LAN_CN1 LAN_CN2

M2_CN1

CN4

CN7

CN5

BAT1

1

2

144

146

260

1

57

67

75

SODIMM1

M2_CN2

13

2.3.1 BAT1 : CR2032 Button Cell Battery Holder

20

L4

G

L3

O

L2

L1

YL4 G

L3

O

L2

L1

Y

BAT1

System has a built-in CR2032 battery holder that allows the real-time clock to

keep the clock running remain operational when the system is disconnected

from power.

2.3.2 CN2 : BIOS Socket

20

L4

G

L3

O

L2

L1

YL4 G

L3

O

L2

L1

Y

CN2

If the BIOS needs to be changed, please contact the Vecow RMA service team.

2.3.3 CN5 : Micro-B USB (Vertical 180°) Console Port

20

L4

G

L3

O

L2

L1

YL4 G

L3

O

L2

L1

Y

CN5

Cortex-M3 Console, Micro USB (R180°) to UART that connects to the Cortex-M3

serial port for rmware update.

Page is loading ...

Vecow VAC-1000 User manual

This manual is also suitable for

Vecow VAC-1000 User manual

Related papers

Other documents